I installed ubuntu 14.04 with gimx 5.9, G27 with cable DS4
When I start error, see the log :
global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.9 x86_64
Ubuntu 14.04.4 LTS
Linux 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 x86_64
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 054c:05c4 Sony Corp.
Bus 002 Device 004: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 002 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/12p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=ftdi_sio, 12M
|__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/12p, 480M
native mode is already enabled for HID device 02:03 (PID=c29b)
Detected USB adapter: G29 PS4.
Reset sent to the adapter.
using default refresh period: 5.00ms
macros are not available for: joystick Sony Computer Entertainment Wireless Controller (0)
closing unused uhid joysticks... done
Warning: can't open macro directory /home/tiago//.gimx//macros/
0 1475058926.842668
src/linux/async.c:269 write: only 4 written (requested 66)
src/linux/async.c:266 write failed with error: Resource temporarily unavailable
Exiting
closing uhid joysticks (it may take a few seconds)
I execute command lsusb :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 054c:05c4 Sony Corp.
Bus 002 Device 004: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 002 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Ubuntu 14.04 GIMX 5.9 g27 f1 2016
Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016
Hi,
Does the dmesg command show any error after reproducing the issue?
Does the dmesg command show any error after reproducing the issue?
GIMX creator
Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016
Code: Select all
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-27-generic (buildd@lcy01-23) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 (Ubuntu 4.2.0-27.32~14.04.1-generic 4.2.8-ckt1)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dbfeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbff0000-0x00000000dbffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010adfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x10ae00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] MTRR: Disabled
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] e820: last_pfn = 0xdbff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[ 0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x10ac00000-0x10adfffff]
[ 0.000000] [mem 0x10ac00000-0x10adfffff] page 2M
[ 0.000000] BRK [0x01ff6000, 0x01ff6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x10abfffff]
[ 0.000000] [mem 0x100000000-0x10abfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xdbfeffff]
[ 0.000000] [mem 0xc0000000-0xdbdfffff] page 2M
[ 0.000000] [mem 0xdbe00000-0xdbfeffff] page 4k
[ 0.000000] BRK [0x01ff7000, 0x01ff7fff] PGTABLE
[ 0.000000] BRK [0x01ff8000, 0x01ff8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x359fa000-0x36cf4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 0x00000000DBFF0040 00004C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000DBFF0110 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000DBFF0530 002118 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[ 0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[ 0.000000] ACPI: APIC 0x00000000DBFF0280 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.000000] ACPI: HPET 0x00000000DBFF02E0 000038 (v01 VBOX VBOXHPET 00000001 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000DBFF0320 00003C (v01 VBOX VBOXMCFG 00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000DBFF0360 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000010adfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x10adf9000-0x10adfdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 1:adf5001, primary cpu clock
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880106800000-ffff88010a3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000010adfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dbfeffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000010adfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000010adfffff]
[ 0.000000] On node 0 totalpages: 945550
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14016 pages used for memmap
[ 0.000000] DMA32 zone: 897008 pages, LIFO batch:31
[ 0.000000] Normal zone: 696 pages used for memmap
[ 0.000000] Normal zone: 44544 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbff0000-0xdbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xdc000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88010aa00000 s96728 r8192 d30248 u2097152
[ 0.000000] pcpu-alloc: s96728 r8192 d30248 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 930753
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3618404K/3782200K available (7940K kernel code, 1243K rwdata, 3816K rodata, 1468K init, 1292K bss, 163796K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 1999.999 MHz processor
[ 3.755054] Calibrating delay loop (skipped) preset value.. 3999.99 BogoMIPS (lpj=7999996)
[ 3.755058] pid_max: default: 32768 minimum: 301
[ 3.755065] ACPI: Core revision 20150619
[ 3.756230] ACPI: All ACPI Tables successfully acquired
[ 3.756249] Security Framework initialized
[ 3.756274] AppArmor: AppArmor initialized
[ 3.756275] Yama: becoming mindful.
[ 3.757861] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 3.761278] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 3.761599] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 3.761604] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 3.761761] Initializing cgroup subsys blkio
[ 3.761764] Initializing cgroup subsys memory
[ 3.761770] Initializing cgroup subsys devices
[ 3.761772] Initializing cgroup subsys freezer
[ 3.761774] Initializing cgroup subsys net_cls
[ 3.761776] Initializing cgroup subsys perf_event
[ 3.761777] Initializing cgroup subsys net_prio
[ 3.761779] Initializing cgroup subsys hugetlb
[ 3.761871] CPU: Physical Processor ID: 0
[ 3.761889] mce: CPU supports 0 MCE banks
[ 3.761916] process: using mwait in idle threads
[ 3.761921] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 3.761922] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 3.786112] Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
[ 3.795971] ftrace: allocating 30981 entries in 122 pages
[ 3.850447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 3.949287] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
[ 3.949290] APIC delta adjusted to PM-Timer: 6276356 (6089304)
[ 3.949346] smpboot: CPU0: Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[ 3.949398] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 3.949412] KVM setup paravirtual spinlock
[ 3.950057] x86: Booted up 1 node, 1 CPUs
[ 3.950059] smpboot: Total of 1 processors activated (3999.99 BogoMIPS)
[ 3.950379] devtmpfs: initialized
[ 3.954034] evm: security.selinux
[ 3.954036] evm: security.SMACK64
[ 3.954037] evm: security.SMACK64EXEC
[ 3.954038] evm: security.SMACK64TRANSMUTE
[ 3.954039] evm: security.SMACK64MMAP
[ 3.954040] evm: security.ima
[ 3.954040] evm: security.capability
[ 3.954161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.954231] pinctrl core: initialized pinctrl subsystem
[ 3.954346] RTC time: 10:30:01, date: 09/28/16
[ 3.954462] NET: Registered protocol family 16
[ 3.954617] cpuidle: using governor ladder
[ 3.954619] cpuidle: using governor menu
[ 3.954736] ACPI: bus type PCI registered
[ 3.954738] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.954849] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[ 3.954876] PCI: not using MMCONFIG
[ 3.954877] PCI: Using configuration type 1 for base access
[ 3.956164] ACPI: Added _OSI(Module Device)
[ 3.956166] ACPI: Added _OSI(Processor Device)
[ 3.956167] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.956168] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.956877] ACPI: Executed 1 blocks of module-level executable AML code
[ 3.958650] ACPI: Interpreter enabled
[ 3.958655] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 3.958658] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 3.958660] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[ 3.958663] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
[ 3.958668] ACPI: (supports S0 S5)
[ 3.958669] ACPI: Using IOAPIC for interrupt routing
[ 3.958796] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[ 3.958985] PCI: MMCONFIG at [mem 0xdc000000-0xdfffffff] reserved in ACPI motherboard resources
[ 3.959003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.963781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.963787] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.963791] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 3.963842] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 3.964090] PCI host bridge to bus 0000:00
[ 3.964093] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.964095] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.964097] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.964098] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.964100] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xffdfffff window]
[ 3.964157] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 3.967743] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[ 3.984177] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 3.986208] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[ 3.989931] pci 0000:00:03.0: reg 0x18: [io 0xd000-0xd007]
[ 3.997897] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 3.999831] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
[ 4.001737] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[ 4.003606] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[ 4.011411] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 4.011557] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 4.011646] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 4.012326] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 4.013319] pci 0000:00:18.0: [8086:2448] type 01 class 0x060401
[ 4.013815] pci 0000:00:19.0: [8086:2448] type 01 class 0x060401
[ 4.014301] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 4.014907] pci 0000:00:1f.0: quirk: [io 0x8000-0x807f] claimed by ICH6 ACPI/GPIO/TCO
[ 4.015166] pci 0000:00:1f.1: [8086:7111] type 00 class 0x01018a
[ 4.015686] pci 0000:00:1f.1: reg 0x20: [io 0xe000-0xe00f]
[ 4.015906] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 4.015908] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 4.015909] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 4.015911] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 4.016156] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 4.018239] pci 0000:00:1f.2: reg 0x10: [io 0xe010-0xe017]
[ 4.020068] pci 0000:00:1f.2: reg 0x14: [io 0xe018-0xe01b]
[ 4.022008] pci 0000:00:1f.2: reg 0x18: [io 0xe020-0xe027]
[ 4.024369] pci 0000:00:1f.2: reg 0x1c: [io 0xe028-0xe02b]
[ 4.026331] pci 0000:00:1f.2: reg 0x20: [io 0xe030-0xe03f]
[ 4.028283] pci 0000:00:1f.2: reg 0x24: [mem 0xf0900000-0xf0901fff]
[ 4.031230] pci 0000:00:1f.4: [106b:003f] type 00 class 0x0c0310
[ 4.033251] pci 0000:00:1f.4: reg 0x10: [mem 0xf0902000-0xf0902fff]
[ 4.045128] pci 0000:00:1f.5: [8086:265c] type 00 class 0x0c0320
[ 4.047154] pci 0000:00:1f.5: reg 0x10: [mem 0xf0903000-0xf0903fff]
[ 4.059230] pci 0000:00:18.0: PCI bridge to [bus 01] (subtractive decode)
[ 4.059311] pci 0000:00:18.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 4.059313] pci 0000:00:18.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 4.059315] pci 0000:00:18.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 4.059317] pci 0000:00:18.0: bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[ 4.059844] pci 0000:00:19.0: PCI bridge to [bus 02] (subtractive decode)
[ 4.059914] pci 0000:00:19.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 4.059916] pci 0000:00:19.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 4.059917] pci 0000:00:19.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 4.059919] pci 0000:00:19.0: bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[ 4.061352] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 4.061584] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11)
[ 4.061687] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
[ 4.061789] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 4.061947] ACPI: Enabled 2 GPEs in block 00 to 07
[ 4.062192] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 4.062195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.062198] vgaarb: loaded
[ 4.062199] vgaarb: bridge control possible 0000:00:02.0
[ 4.063913] SCSI subsystem initialized
[ 4.063984] libata version 3.00 loaded.
[ 4.064022] ACPI: bus type USB registered
[ 4.064047] usbcore: registered new interface driver usbfs
[ 4.064056] usbcore: registered new interface driver hub
[ 4.064068] usbcore: registered new device driver usb
[ 4.064248] PCI: Using ACPI for IRQ routing
[ 4.086026] PCI: pci_cache_line_size set to 64 bytes
[ 4.086310] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 4.086319] e820: reserve RAM buffer [mem 0xdbff0000-0xdbffffff]
[ 4.086320] e820: reserve RAM buffer [mem 0x10ae00000-0x10bffffff]
[ 4.086465] NetLabel: Initializing
[ 4.086466] NetLabel: domain hash size = 128
[ 4.086467] NetLabel: protocols = UNLABELED CIPSOv4
[ 4.086478] NetLabel: unlabeled traffic allowed by default
[ 4.086598] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 4.086627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 4.086631] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 4.089750] clocksource: Switched to clocksource kvm-clock
[ 4.099259] AppArmor: AppArmor Filesystem Enabled
[ 4.099330] pnp: PnP ACPI init
[ 4.099426] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 4.099518] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 4.099588] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 4.099680] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 4.099683] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 4.099851] system 00:04: [mem 0xdc000000-0xdfffffff] has been reserved
[ 4.099854] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.100060] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 4.100814] pnp: PnP ACPI: found 6 devices
[ 4.106897] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 4.106964] pci 0000:00:18.0: PCI bridge to [bus 01]
[ 4.107072] pci 0000:00:19.0: PCI bridge to [bus 02]
[ 4.107176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 4.107178] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 4.107180] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.107181] pci_bus 0000:00: resource 7 [mem 0xdc000000-0xffdfffff window]
[ 4.107183] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 4.107185] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 4.107186] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.107188] pci_bus 0000:01: resource 7 [mem 0xdc000000-0xffdfffff window]
[ 4.107189] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 4.107191] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 4.107192] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.107194] pci_bus 0000:02: resource 7 [mem 0xdc000000-0xffdfffff window]
[ 4.107255] NET: Registered protocol family 2
[ 4.107450] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 4.107523] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 4.107580] TCP: Hash tables configured (established 32768 bind 32768)
[ 4.107604] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 4.107618] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 4.107667] NET: Registered protocol family 1
[ 4.107706] pci 0000:00:02.0: Video device with shadowed ROM
[ 4.109791] PCI: CLS 0 bytes, default 64
[ 4.109881] Trying to unpack rootfs image as initramfs...
[ 4.438236] Freeing initrd memory: 19436K (ffff8800359fa000 - ffff880036cf5000)
[ 4.438280] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.438282] software IO TLB [mem 0xd7ff0000-0xdbff0000] (64MB) mapped at [ffff8800d7ff0000-ffff8800dbfeffff]
[ 4.438365] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
[ 4.438366] hw unit of domain pp0-core 2^-0 Joules
[ 4.438367] hw unit of domain package 2^-0 Joules
[ 4.438368] hw unit of domain pp1-gpu 2^-0 Joules
[ 4.438424] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
[ 4.438481] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.438565] Scanning for low memory corruption every 60 seconds
[ 4.438826] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 4.438842] Initialise system trusted keyring
[ 4.438861] audit: initializing netlink subsys (disabled)
[ 4.438875] audit: type=2000 audit(1475058607.110:1): initialized
[ 4.439174] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.440539] zpool: loaded
[ 4.440541] zbud: loaded
[ 4.440700] VFS: Disk quotas dquot_6.6.0
[ 4.440729] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.442667] fuse init (API version 7.23)
[ 4.442793] Key type big_key registered
[ 4.443005] Key type asymmetric registered
[ 4.443013] Asymmetric key parser 'x509' registered
[ 4.443030] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 4.443058] io scheduler noop registered
[ 4.443061] io scheduler deadline registered (default)
[ 4.443096] io scheduler cfq registered
[ 4.443264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.443270] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.443301] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 4.443302] vesafb: scrolling: redraw
[ 4.443304] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.443315] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[ 4.443401] Console: switching to colour frame buffer device 80x30
[ 4.443409] fb0: VESA VGA frame buffer device
[ 4.443780] ACPI: AC Adapter [AC] (on-line)
[ 4.443841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 4.443845] ACPI: Power Button [PWRF]
[ 4.443951] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 4.443953] ACPI: Sleep Button [SLPF]
[ 4.444096] GHES: HEST is not enabled!
[ 4.445231] ACPI: Battery Slot [BAT0] (battery present)
[ 4.445288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.468385] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.469999] Linux agpgart interface v0.103
[ 4.471626] brd: module loaded
[ 4.472269] loop: module loaded
[ 4.472422] ata_piix 0000:00:1f.1: version 2.13
[ 4.472895] scsi host0: ata_piix
[ 4.472954] scsi host1: ata_piix
[ 4.472983] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 4.472985] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 4.473051] libphy: Fixed MDIO Bus: probed
[ 4.473054] tun: Universal TUN/TAP device driver, 1.6
[ 4.473055] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.473398] PPP generic driver version 2.4.2
[ 4.473471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.473476] ehci-pci: EHCI PCI platform driver
[ 4.474018] ehci-pci 0000:00:1f.5: EHCI Host Controller
[ 4.474026] ehci-pci 0000:00:1f.5: new USB bus registered, assigned bus number 1
[ 4.474273] ehci-pci 0000:00:1f.5: irq 23, io mem 0xf0903000
[ 4.485818] ehci-pci 0000:00:1f.5: USB 2.0 started, EHCI 1.00
[ 4.485880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.485882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.485883] usb usb1: Product: EHCI Host Controller
[ 4.485885] usb usb1: Manufacturer: Linux 4.2.0-27-generic ehci_hcd
[ 4.485886] usb usb1: SerialNumber: 0000:00:1f.5
[ 4.486018] hub 1-0:1.0: USB hub found
[ 4.486023] hub 1-0:1.0: 12 ports detected
[ 4.486256] ehci-platform: EHCI generic platform driver
[ 4.486271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.486277] ohci-pci: OHCI PCI platform driver
[ 4.486807] ohci-pci 0000:00:1f.4: OHCI PCI host controller
[ 4.486814] ohci-pci 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 4.486850] ohci-pci 0000:00:1f.4: irq 23, io mem 0xf0902000
[ 4.542142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.542145] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.542147] usb usb2: Product: OHCI PCI host controller
[ 4.542148] usb usb2: Manufacturer: Linux 4.2.0-27-generic ohci_hcd
[ 4.542150] usb usb2: SerialNumber: 0000:00:1f.4
[ 4.542286] hub 2-0:1.0: USB hub found
[ 4.542304] hub 2-0:1.0: 12 ports detected
[ 4.542790] ohci-platform: OHCI generic platform driver
[ 4.542804] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.542864] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 4.543357] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.543362] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.543471] mousedev: PS/2 mouse device common for all mice
[ 4.543846] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.544262] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 4.544364] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 4.544373] i2c /dev entries driver
[ 4.544443] device-mapper: uevent: version 1.0.3
[ 4.544504] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 4.544518] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.544593] PCCT header not found.
[ 4.544771] NET: Registered protocol family 10
[ 4.544930] NET: Registered protocol family 17
[ 4.544941] Key type dns_resolver registered
[ 4.545142] Loading compiled-in X.509 certificates
[ 4.545983] Loaded X.509 cert 'Build time autogenerated kernel key: 736e2f9ea1b4728a15ac169b1869267e1128d6e8'
[ 4.546014] registered taskstats version 1
[ 4.546034] zswap: loading zswap
[ 4.546036] zswap: using zbud pool
[ 4.546040] zswap: using lzo compressor
[ 4.547833] Key type trusted registered
[ 4.550967] Key type encrypted registered
[ 4.550974] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.550978] ima: No TPM chip found, activating TPM-bypass!
[ 4.550998] evm: HMAC attrs: 0x1
[ 4.551427] Magic number: 0:660:528
[ 4.551504] rtc_cmos 00:02: setting system clock to 2016-09-28 10:30:02 UTC (1475058602)
[ 4.551563] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.551564] EDD information not available.
[ 4.551607] PM: Hibernation image not present or could not be loaded.
[ 4.630066] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 4.630466] ata2.00: configured for UDMA/33
[ 4.630898] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 4.631442] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 4.631444] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.631544] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.631681] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 4.631995] Freeing unused kernel memory: 1468K (ffffffff81d38000 - ffffffff81ea7000)
[ 4.631997] Write protecting the kernel read-only data: 12288k
[ 4.632186] Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
[ 4.632291] Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
[ 4.645995] systemd-udevd[99]: starting version 204
[ 4.673005] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 4.673007] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 5.033947] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.099139] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:45:cf:f3
[ 5.099147] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.099176] ahci 0000:00:1f.2: version 3.0
[ 5.099914] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 5.100090] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 5.100093] ahci 0000:00:1f.2: flags: 64bit ncq stag only ccc
[ 5.101172] scsi host2: ahci
[ 5.101276] ata3: SATA max UDMA/133 abar m8192@0xf0900000 port 0xf0900100 irq 24
[ 5.242780] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 5.418209] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.418398] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 5.418401] ata3.00: 31169232 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 5.418585] ata3.00: configured for UDMA/133
[ 5.418677] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 5.418876] sd 2:0:0:0: [sda] 31169232 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 5.418908] sd 2:0:0:0: [sda] Write Protect is off
[ 5.418910] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.418925] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.419099] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.425654] sda: sda1 sda2 < sda5 >
[ 5.426361] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.437839] tsc: Refined TSC clocksource calibration: 1994.346 MHz
[ 5.437844] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x397ea2499f2, max_idle_ns: 881590595197 ns
[ 5.506702] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.525223] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 5.525227] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 5.525229] usb 2-1: Product: USB Tablet
[ 5.525230] usb 2-1: Manufacturer: VirtualBox
[ 7.698828] floppy0: no floppy controllers found
[ 7.698881] work still pending
[ 7.816514] random: init urandom read with 41 bits of entropy available
[ 7.864773] init: plymouth-upstart-bridge main process (151) terminated with status 1
[ 7.864795] init: plymouth-upstart-bridge main process ended, respawning
[ 7.884116] init: plymouth-upstart-bridge main process (161) terminated with status 1
[ 7.884129] init: plymouth-upstart-bridge main process ended, respawning
[ 7.895621] init: plymouth-upstart-bridge main process (164) terminated with status 1
[ 7.895633] init: plymouth-upstart-bridge main process ended, respawning
[ 9.162567] Adding 3780604k swap on /dev/sda5. Priority:-1 extents:1 across:3780604k FS
[ 9.175525] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.362256] systemd-udevd[296]: starting version 204
[ 9.489406] lp: driver loaded but no devices found
[ 9.536213] ppdev: user-space parallel port driver
[ 9.575668] vboxguest: module verification failed: signature and/or required key missing - tainting kernel
[ 9.641255] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 9.656185] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 9.661951] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input5
[ 9.664776] vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 9.664819] vboxguest: Successfully loaded version 5.0.26 (interface 0x00010004)
[ 9.835374] random: nonblocking pool is initialized
[ 9.908754] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.909646] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[ 9.930544] Bluetooth: Core ver 2.20
[ 9.930680] NET: Registered protocol family 31
[ 9.930681] Bluetooth: HCI device and connection manager initialized
[ 9.930684] Bluetooth: HCI socket layer initialized
[ 9.930686] Bluetooth: L2CAP socket layer initialized
[ 9.930691] Bluetooth: SCO socket layer initialized
[ 9.950110] intel_rng: FWH not detected
[ 9.959191] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[ 9.963953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.963955] Bluetooth: BNEP filters: protocol multicast
[ 9.963960] Bluetooth: BNEP socket layer initialized
[ 9.971429] audit: type=1400 audit(1475058607.916:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=413 comm="apparmor_parser"
[ 9.971435] audit: type=1400 audit(1475058607.916:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
[ 9.971440] audit: type=1400 audit(1475058607.916:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[ 9.971828] audit: type=1400 audit(1475058607.916:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
[ 9.971833] audit: type=1400 audit(1475058607.916:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[ 9.972037] audit: type=1400 audit(1475058607.916:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[ 9.985896] Bluetooth: RFCOMM TTY layer initialized
[ 9.985903] Bluetooth: RFCOMM socket layer initialized
[ 9.985909] Bluetooth: RFCOMM ver 1.11
[ 10.047354] leds_ss4200: no LED devices found
[ 10.105548] audit: type=1400 audit(1475058608.048:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=432 comm="apparmor_parser"
[ 10.105555] audit: type=1400 audit(1475058608.048:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=432 comm="apparmor_parser"
[ 10.105899] audit: type=1400 audit(1475058608.048:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=432 comm="apparmor_parser"
[ 10.138543] [drm] Initialized drm 1.1.0 20060810
[ 10.510817] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.540476] [drm] VRAM 00c00000
[ 10.546894] [TTM] Zone kernel: Available graphics memory: 1819928 kiB
[ 10.546896] [TTM] Initializing pool allocator
[ 10.546901] [TTM] Initializing DMA pool allocator
[ 10.551109] checking generic (e0000000 130000) vs hw (e0000000 1000000)
[ 10.551111] fb: switching to vboxdrmfb from VESA VGA
[ 10.551148] Console: switching to colour dummy device 80x25
[ 10.551319] fbcon: vboxdrmfb (fb0) is primary device
[ 10.551408] Console: switching to colour frame buffer device 100x37
[ 10.551419] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[ 10.551421] vboxvideo 0000:00:02.0: registered panic notifier
[ 10.551424] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[ 10.564396] usbcore: registered new interface driver usbhid
[ 10.564399] usbhid: USB HID core driver
[ 10.565232] AVX version of gcm_enc/dec engaged.
[ 10.565235] AES CTR mode by8 optimization enabled
[ 10.778020] audit: type=1400 audit(1475058608.720:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=551 comm="apparmor_parser"
[ 10.950625] init: failsafe main process (524) killed by TERM signal
[ 11.081580] intel_rapl: no valid rapl domains found in package 0
[ 11.392601] snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
[ 11.413601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.414942] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 11.415360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.427427] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input7
[ 11.428203] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:1f.4-1/input0
[ 11.772197] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 12.990109] floppy0: no floppy controllers found
[ 12.990165] work still pending
[ 13.428326] init: plymouth-upstart-bridge main process ended, respawning
[ 13.545637] vboxsf: Successfully loaded version 5.0.26 (interface 0x00010004)
[ 17.526869] VBoxService 5.0.26 r108824 (verbosity: 0) linux.amd64 (Jul 18 2016 13:51:44) release log
[ 17.526869] 00:00:00.000090 main Log opened 2016-09-28T10:30:15.475295000Z
[ 17.526931] 00:00:00.000187 main OS Product: Linux
[ 17.526967] 00:00:00.000229 main OS Release: 4.2.0-27-generic
[ 17.527002] 00:00:00.000264 main OS Version: #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016
[ 17.527045] 00:00:00.000298 main Executable: /opt/VBoxGuestAdditions-5.0.26/sbin/VBoxService
[ 17.527045] 00:00:00.000300 main Process ID: 1802
[ 17.527045] 00:00:00.000300 main Package type: LINUX_64BITS_GENERIC
[ 17.536934] 00:00:00.010163 main 5.0.26 r108824 started. Verbose level = 0
[ 17.558288] 00:00:00.031517 automount vbsvcAutoMountWorker: Shared folder 'tiagovaz' was mounted to '/media/sf_tiagovaz'
[ 17.819693] init: plymouth-stop pre-start process (1859) terminated with status 1
[ 19.934741] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 19.950191] ISO 9660 Extensions: RRIP_1991A
[ 157.958216] usb 2-2: new full-speed USB device number 3 using ohci-pci
[ 158.258315] usb 2-2: New USB device found, idVendor=0403, idProduct=6001
[ 158.258320] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 158.258321] usb 2-2: Product: FT232R USB UART
[ 158.258323] usb 2-2: Manufacturer: FTDI
[ 158.258324] usb 2-2: SerialNumber: A50285BI
[ 158.292002] usbcore: registered new interface driver usbserial
[ 158.292177] usbcore: registered new interface driver usbserial_generic
[ 158.292356] usbserial: USB Serial support registered for generic
[ 158.300596] usbcore: registered new interface driver ftdi_sio
[ 158.303046] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 158.304096] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
[ 158.305295] usb 2-2: Detected FT232RL
[ 158.317203] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 161.484318] usb 2-3: new full-speed USB device number 4 using ohci-pci
[ 161.788344] usb 2-3: New USB device found, idVendor=046d, idProduct=c29b
[ 161.788348] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 161.788350] usb 2-3: Product: G27 Racing Wheel
[ 161.876836] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0002/input/input8
[ 161.934668] logitech 0003:046D:C29B.0002: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[ 161.934764] logitech 0003:046D:C29B.0002: Force feedback support for Logitech Gaming Wheels
[ 164.317619] usb 2-4: new full-speed USB device number 5 using ohci-pci
[ 164.607909] usb 2-4: New USB device found, idVendor=054c, idProduct=05c4
[ 164.607913] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 164.607915] usb 2-4: Product: Wireless Controller
[ 164.607917] usb 2-4: Manufacturer: Sony Computer Entertainment
[ 164.805930] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0003/input/input9
[ 164.863116] sony 0003:054C:05C4.0003: input,hidraw2: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[ 297.643122] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0004/input/input10
[ 297.643374] logitech 0003:046D:C29B.0004: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[ 297.643462] logitech 0003:046D:C29B.0004: Force feedback support for Logitech Gaming Wheels
[ 297.854711] usb 2-4: reset full-speed USB device number 5 using ohci-pci
[ 298.127154] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.0005/input/input11
[ 298.127381] hid-generic 0006:046D:C29B.0005: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on
[ 298.794073] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0006/input/input12
[ 298.794304] logitech 0003:046D:C29B.0006: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[ 298.794403] logitech 0003:046D:C29B.0006: Force feedback support for Logitech Gaming Wheels
[ 298.965169] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0007/input/input13
[ 298.965410] sony 0003:054C:05C4.0007: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[ 327.382889] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.0008/input/input14
[ 327.383088] logitech 0003:046D:C29B.0008: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[ 327.383176] logitech 0003:046D:C29B.0008: Force feedback support for Logitech Gaming Wheels
[ 327.623578] usb 2-4: reset full-speed USB device number 5 using ohci-pci
[ 327.867849] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.0009/input/input15
[ 327.868071] hid-generic 0006:046D:C29B.0009: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on
[ 329.832324] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000A/input/input16
[ 329.832489] logitech 0003:046D:C29B.000A: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[ 329.832581] logitech 0003:046D:C29B.000A: Force feedback support for Logitech Gaming Wheels
[ 330.001048] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.000B/input/input17
[ 330.001178] sony 0003:054C:05C4.000B: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[ 958.897144] audit_printk_skb: 150 callbacks suppressed
[ 958.897147] audit: type=1400 audit(1475059557.939:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2767 comm="apparmor_parser"
[ 958.897155] audit: type=1400 audit(1475059557.939:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2767 comm="apparmor_parser"
[ 958.897512] audit: type=1400 audit(1475059557.939:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2767 comm="apparmor_parser"
[16834.761567] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000C/input/input18
[16834.761770] logitech 0003:046D:C29B.000C: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[16834.761864] logitech 0003:046D:C29B.000C: Force feedback support for Logitech Gaming Wheels
[16840.469993] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000D/input/input19
[16840.470209] logitech 0003:046D:C29B.000D: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[16840.470304] logitech 0003:046D:C29B.000D: Force feedback support for Logitech Gaming Wheels
[16840.710516] usb 2-4: reset full-speed USB device number 5 using ohci-pci
[16840.957767] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.000E/input/input20
[16840.957952] hid-generic 0006:046D:C29B.000E: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on
[16843.527228] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:046D:C29B.000F/input/input21
[16843.527479] logitech 0003:046D:C29B.000F: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-3/input0
[16843.527580] logitech 0003:046D:C29B.000F: Force feedback support for Logitech Gaming Wheels
[16843.697637] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0010/input/input22
[16843.697930] sony 0003:054C:05C4.0010: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[16858.639900] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-4/2-4:1.0/0003:054C:05C4.0011/input/input23
[16858.696071] sony 0003:054C:05C4.0011: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-4/input0
[16973.218534] systemd-hostnamed[3100]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016
The FT232RL chip is a fake one:
http://www.starlino.com/ftdi-chip-real- ... thers.html
http://www.starlino.com/ftdi-chip-real- ... thers.html
GIMX creator
Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016
I change adapter to CP2102
gimx log
command dmesg
gimx log
Code: Select all
global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.9 x86_64
Ubuntu 14.04.4 LTS
Linux 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 x86_64
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 002 Device 004: ID 054c:05c4 Sony Corp.
Bus 002 Device 003: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/12p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/12p, 480M
native mode is already enabled for HID device 02:02 (PID=c29b)
Detected USB adapter: G29 PS4.
using default refresh period: 5.00ms
macros are not available for: joystick Sony Computer Entertainment Wireless Controller (0)
closing unused uhid joysticks... done
Warning: can't open macro directory /home/tiago//.gimx//macros/
0 1475144947.026699
0 1475144948.234964, wheel (-5), gear shifter 4 (255)
0 1475144951.549903, wheel (-5), PS (255), gear shifter 4 (255)
0 1475144951.979860, wheel (-5), gear shifter 4 (255)
0 1475144952.985185, wheel (-5), cross (255), gear shifter 4 (255)
0 1475144953.206653, wheel (-5), gear shifter 4 (255)
0 1475144958.389977, wheel (-5), right (255), gear shifter 4 (255)
0 1475144958.509917, wheel (-5), gear shifter 4 (255)
0 1475144959.525129, wheel (-5), right (255), gear shifter 4 (255)
0 1475144959.669953, wheel (-5), gear shifter 4 (255)
0 1475144959.860252, wheel (-5), right (255), gear shifter 4 (255)
0 1475144959.994941, wheel (-5), gear shifter 4 (255)
0 1475144960.150069, wheel (-5), right (255), gear shifter 4 (255)
0 1475144960.284827, wheel (-5), gear shifter 4 (255)
0 1475144961.119905, wheel (-5), left (255), gear shifter 4 (255)
0 1475144961.260003, wheel (-5), gear shifter 4 (255)
0 1475144961.474979, wheel (-5), left (255), gear shifter 4 (255)
0 1475144961.590017, wheel (-5), gear shifter 4 (255)
0 1475144962.069960, wheel (-5), cross (255), gear shifter 4 (255)
0 1475144962.235000, wheel (-5), gear shifter 4 (255)
0 1475144968.635043, wheel (-17), gear shifter 4 (255)
0 1475144972.360089, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144972.545062, wheel (-17), gear shifter 4 (255)
0 1475144973.384949, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144973.539942, wheel (-17), gear shifter 4 (255)
0 1475144974.834934, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144975.000114, wheel (-17), gear shifter 4 (255)
0 1475144981.359960, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144981.600016, wheel (-17), gear shifter 4 (255)
0 1475144988.035356, wheel (-17), left (255), gear shifter 4 (255)
0 1475144988.209974, wheel (-17), gear shifter 4 (255)
0 1475144989.694952, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144989.865153, wheel (-17), gear shifter 4 (255)
0 1475144992.610183, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144992.815015, wheel (-17), gear shifter 4 (255)
0 1475144993.680069, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144993.880128, wheel (-17), gear shifter 4 (255)
0 1475144999.489917, wheel (-17), cross (255), gear shifter 4 (255)
0 1475144999.644875, wheel (-17), gear shifter 4 (255)
0 1475145012.965018, wheel (-17), cross (255), gear shifter 4 (255)
0 1475145013.139926, wheel (-17), gear shifter 4 (255)
0 1475145014.229918, wheel (-17), cross (255), gear shifter 4 (255)
0 1475145014.405093, wheel (-17), gear shifter 4 (255)
0 1475145019.589959, wheel (-17), triangle (255), gear shifter 4 (255)
0 1475145019.769924, wheel (-17), gear shifter 4 (255)
src/linux/async.c:269 write: only 4 written (requested 66)
src/linux/async.c:266 write failed with error: Resource temporarily unavailable
Exiting
closing uhid joysticks (it may take a few seconds)Code: Select all
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-27-generic (buildd@lcy01-23) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 (Ubuntu 4.2.0-27.32~14.04.1-generic 4.2.8-ckt1)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dbfeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbff0000-0x00000000dbffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010adfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x10ae00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] MTRR: Disabled
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] e820: last_pfn = 0xdbff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[ 0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x10ac00000-0x10adfffff]
[ 0.000000] [mem 0x10ac00000-0x10adfffff] page 2M
[ 0.000000] BRK [0x01ff6000, 0x01ff6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x10abfffff]
[ 0.000000] [mem 0x100000000-0x10abfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xdbfeffff]
[ 0.000000] [mem 0xc0000000-0xdbdfffff] page 2M
[ 0.000000] [mem 0xdbe00000-0xdbfeffff] page 4k
[ 0.000000] BRK [0x01ff7000, 0x01ff7fff] PGTABLE
[ 0.000000] BRK [0x01ff8000, 0x01ff8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x359fa000-0x36cf4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 0x00000000DBFF0040 00004C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000DBFF0110 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000DBFF0530 002118 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[ 0.000000] ACPI: FACS 0x00000000DBFF0240 000040
[ 0.000000] ACPI: APIC 0x00000000DBFF0280 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
[ 0.000000] ACPI: HPET 0x00000000DBFF02E0 000038 (v01 VBOX VBOXHPET 00000001 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000DBFF0320 00003C (v01 VBOX VBOXMCFG 00000001 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000DBFF0360 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000010adfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x10adf9000-0x10adfdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 1:adf5001, primary cpu clock
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880106800000-ffff88010a3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000010adfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dbfeffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000010adfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000010adfffff]
[ 0.000000] On node 0 totalpages: 945550
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14016 pages used for memmap
[ 0.000000] DMA32 zone: 897008 pages, LIFO batch:31
[ 0.000000] Normal zone: 696 pages used for memmap
[ 0.000000] Normal zone: 44544 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbff0000-0xdbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xdc000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88010aa00000 s96728 r8192 d30248 u2097152
[ 0.000000] pcpu-alloc: s96728 r8192 d30248 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 930753
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=b8a7e453-3f38-4bc9-a491-c916ccfe3d29 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3618404K/3782200K available (7940K kernel code, 1243K rwdata, 3816K rodata, 1468K init, 1292K bss, 163796K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 1999.999 MHz processor
[ 6.142077] Calibrating delay loop (skipped) preset value.. 3999.99 BogoMIPS (lpj=7999996)
[ 6.142081] pid_max: default: 32768 minimum: 301
[ 6.142087] ACPI: Core revision 20150619
[ 6.143216] ACPI: All ACPI Tables successfully acquired
[ 6.143338] Security Framework initialized
[ 6.143350] AppArmor: AppArmor initialized
[ 6.143352] Yama: becoming mindful.
[ 6.146829] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 6.152550] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 6.153054] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 6.153063] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 6.153353] Initializing cgroup subsys blkio
[ 6.153357] Initializing cgroup subsys memory
[ 6.153367] Initializing cgroup subsys devices
[ 6.153370] Initializing cgroup subsys freezer
[ 6.153373] Initializing cgroup subsys net_cls
[ 6.153375] Initializing cgroup subsys perf_event
[ 6.153378] Initializing cgroup subsys net_prio
[ 6.153381] Initializing cgroup subsys hugetlb
[ 6.153531] CPU: Physical Processor ID: 0
[ 6.153560] mce: CPU supports 0 MCE banks
[ 6.153599] process: using mwait in idle threads
[ 6.153608] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 6.153610] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 6.178446] Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
[ 6.191411] ftrace: allocating 30981 entries in 122 pages
[ 6.250180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 6.349935] smpboot: CPU0: Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[ 6.349980] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 6.349995] KVM setup paravirtual spinlock
[ 6.350713] x86: Booted up 1 node, 1 CPUs
[ 6.350715] smpboot: Total of 1 processors activated (3999.99 BogoMIPS)
[ 6.351105] devtmpfs: initialized
[ 6.354953] evm: security.selinux
[ 6.354955] evm: security.SMACK64
[ 6.354956] evm: security.SMACK64EXEC
[ 6.354957] evm: security.SMACK64TRANSMUTE
[ 6.354958] evm: security.SMACK64MMAP
[ 6.354958] evm: security.ima
[ 6.354959] evm: security.capability
[ 6.355088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 6.355162] pinctrl core: initialized pinctrl subsystem
[ 6.355286] RTC time: 10:27:50, date: 09/29/16
[ 6.355408] NET: Registered protocol family 16
[ 6.355573] cpuidle: using governor ladder
[ 6.355575] cpuidle: using governor menu
[ 6.355697] ACPI: bus type PCI registered
[ 6.355699] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 6.355818] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[ 6.355820] PCI: not using MMCONFIG
[ 6.355821] PCI: Using configuration type 1 for base access
[ 6.357156] ACPI: Added _OSI(Module Device)
[ 6.357158] ACPI: Added _OSI(Processor Device)
[ 6.357159] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 6.357160] ACPI: Added _OSI(Processor Aggregator Device)
[ 6.357947] ACPI: Executed 1 blocks of module-level executable AML code
[ 6.361014] ACPI: Interpreter enabled
[ 6.361025] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 6.361032] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 6.361037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[ 6.361042] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
[ 6.361051] ACPI: (supports S0 S5)
[ 6.361054] ACPI: Using IOAPIC for interrupt routing
[ 6.361312] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
[ 6.361701] PCI: MMCONFIG at [mem 0xdc000000-0xdfffffff] reserved in ACPI motherboard resources
[ 6.361735] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 6.369001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 6.369007] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 6.369011] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 6.369063] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 6.369311] PCI host bridge to bus 0000:00
[ 6.369314] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.369316] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 6.369317] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 6.369319] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 6.369320] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xffdfffff window]
[ 6.369379] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 6.371725] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[ 6.385045] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 6.387119] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[ 6.390784] pci 0000:00:03.0: reg 0x18: [io 0xd000-0xd007]
[ 6.400210] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 6.403305] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
[ 6.406175] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[ 6.408546] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[ 6.416651] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 6.416801] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 6.416890] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 6.417609] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 6.418612] pci 0000:00:18.0: [8086:2448] type 01 class 0x060401
[ 6.419099] pci 0000:00:19.0: [8086:2448] type 01 class 0x060401
[ 6.419615] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 6.420239] pci 0000:00:1f.0: quirk: [io 0x8000-0x807f] claimed by ICH6 ACPI/GPIO/TCO
[ 6.420502] pci 0000:00:1f.1: [8086:7111] type 00 class 0x01018a
[ 6.421026] pci 0000:00:1f.1: reg 0x20: [io 0xe000-0xe00f]
[ 6.421249] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 6.421250] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 6.421252] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 6.421253] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 6.421502] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 6.423657] pci 0000:00:1f.2: reg 0x10: [io 0xe010-0xe017]
[ 6.425594] pci 0000:00:1f.2: reg 0x14: [io 0xe018-0xe01b]
[ 6.427548] pci 0000:00:1f.2: reg 0x18: [io 0xe020-0xe027]
[ 6.429377] pci 0000:00:1f.2: reg 0x1c: [io 0xe028-0xe02b]
[ 6.431364] pci 0000:00:1f.2: reg 0x20: [io 0xe030-0xe03f]
[ 6.433143] pci 0000:00:1f.2: reg 0x24: [mem 0xf0900000-0xf0901fff]
[ 6.435560] pci 0000:00:1f.4: [106b:003f] type 00 class 0x0c0310
[ 6.437537] pci 0000:00:1f.4: reg 0x10: [mem 0xf0902000-0xf0902fff]
[ 6.449483] pci 0000:00:1f.5: [8086:265c] type 00 class 0x0c0320
[ 6.451623] pci 0000:00:1f.5: reg 0x10: [mem 0xf0903000-0xf0903fff]
[ 6.463952] pci 0000:00:18.0: PCI bridge to [bus 01] (subtractive decode)
[ 6.464030] pci 0000:00:18.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 6.464032] pci 0000:00:18.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 6.464034] pci 0000:00:18.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 6.464035] pci 0000:00:18.0: bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[ 6.464565] pci 0000:00:19.0: PCI bridge to [bus 02] (subtractive decode)
[ 6.464636] pci 0000:00:19.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 6.464637] pci 0000:00:19.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 6.464639] pci 0000:00:19.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 6.464640] pci 0000:00:19.0: bridge window [mem 0xdc000000-0xffdfffff window] (subtractive decode)
[ 6.466940] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 6.467519] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11)
[ 6.467746] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
[ 6.467992] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 6.468297] ACPI: Enabled 2 GPEs in block 00 to 07
[ 6.468745] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 6.468750] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 6.468755] vgaarb: loaded
[ 6.468758] vgaarb: bridge control possible 0000:00:02.0
[ 6.472188] SCSI subsystem initialized
[ 6.472317] libata version 3.00 loaded.
[ 6.472402] ACPI: bus type USB registered
[ 6.472444] usbcore: registered new interface driver usbfs
[ 6.472457] usbcore: registered new interface driver hub
[ 6.472476] usbcore: registered new device driver usb
[ 6.472823] PCI: Using ACPI for IRQ routing
[ 6.498729] PCI: pci_cache_line_size set to 64 bytes
[ 6.499297] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 6.499316] e820: reserve RAM buffer [mem 0xdbff0000-0xdbffffff]
[ 6.499319] e820: reserve RAM buffer [mem 0x10ae00000-0x10bffffff]
[ 6.499599] NetLabel: Initializing
[ 6.499602] NetLabel: domain hash size = 128
[ 6.499603] NetLabel: protocols = UNLABELED CIPSOv4
[ 6.499624] NetLabel: unlabeled traffic allowed by default
[ 6.499855] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 6.499911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 6.499918] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 6.508213] clocksource: Switched to clocksource kvm-clock
[ 6.517846] AppArmor: AppArmor Filesystem Enabled
[ 6.517921] pnp: PnP ACPI init
[ 6.517992] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 6.518082] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 6.518142] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 6.518229] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 6.518233] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 6.518474] system 00:04: [mem 0xdc000000-0xdfffffff] has been reserved
[ 6.518479] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 6.518712] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 6.519413] pnp: PnP ACPI: found 6 devices
[ 6.525539] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 6.525609] pci 0000:00:18.0: PCI bridge to [bus 01]
[ 6.525723] pci 0000:00:19.0: PCI bridge to [bus 02]
[ 6.525833] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 6.525834] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 6.525836] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 6.525838] pci_bus 0000:00: resource 7 [mem 0xdc000000-0xffdfffff window]
[ 6.525840] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 6.525841] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 6.525843] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 6.525844] pci_bus 0000:01: resource 7 [mem 0xdc000000-0xffdfffff window]
[ 6.525846] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 6.525848] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 6.525849] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 6.525851] pci_bus 0000:02: resource 7 [mem 0xdc000000-0xffdfffff window]
[ 6.525887] NET: Registered protocol family 2
[ 6.526070] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 6.526137] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 6.526191] TCP: Hash tables configured (established 32768 bind 32768)
[ 6.526214] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 6.526228] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 6.526268] NET: Registered protocol family 1
[ 6.526307] pci 0000:00:02.0: Video device with shadowed ROM
[ 6.528769] PCI: CLS 0 bytes, default 64
[ 6.528861] Trying to unpack rootfs image as initramfs...
[ 6.902159] Freeing initrd memory: 19436K (ffff8800359fa000 - ffff880036cf5000)
[ 6.902218] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 6.902221] software IO TLB [mem 0xd7ff0000-0xdbff0000] (64MB) mapped at [ffff8800d7ff0000-ffff8800dbfeffff]
[ 6.902330] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
[ 6.902332] hw unit of domain pp0-core 2^-0 Joules
[ 6.902333] hw unit of domain package 2^-0 Joules
[ 6.902334] hw unit of domain pp1-gpu 2^-0 Joules
[ 6.902392] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
[ 6.902442] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.902521] Scanning for low memory corruption every 60 seconds
[ 6.902799] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 6.902816] Initialise system trusted keyring
[ 6.902837] audit: initializing netlink subsys (disabled)
[ 6.902852] audit: type=2000 audit(1475144878.184:1): initialized
[ 6.903152] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.904494] zpool: loaded
[ 6.904497] zbud: loaded
[ 6.904668] VFS: Disk quotas dquot_6.6.0
[ 6.904698] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.906639] fuse init (API version 7.23)
[ 6.906767] Key type big_key registered
[ 6.906974] Key type asymmetric registered
[ 6.906982] Asymmetric key parser 'x509' registered
[ 6.906999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 6.907027] io scheduler noop registered
[ 6.907030] io scheduler deadline registered (default)
[ 6.907065] io scheduler cfq registered
[ 6.907159] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.907165] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 6.907195] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 6.907196] vesafb: scrolling: redraw
[ 6.907198] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 6.907208] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[ 6.907280] Console: switching to colour frame buffer device 80x30
[ 6.907289] fb0: VESA VGA frame buffer device
[ 6.907702] ACPI: AC Adapter [AC] (on-line)
[ 6.907765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 6.907769] ACPI: Power Button [PWRF]
[ 6.907875] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 6.907877] ACPI: Sleep Button [SLPF]
[ 6.908054] GHES: HEST is not enabled!
[ 6.909224] ACPI: Battery Slot [BAT0] (battery present)
[ 6.909285] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 6.932391] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 6.936048] Linux agpgart interface v0.103
[ 6.939617] brd: module loaded
[ 6.940704] loop: module loaded
[ 6.940976] ata_piix 0000:00:1f.1: version 2.13
[ 6.941651] scsi host0: ata_piix
[ 6.941745] scsi host1: ata_piix
[ 6.941794] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 6.941796] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 6.941903] libphy: Fixed MDIO Bus: probed
[ 6.941908] tun: Universal TUN/TAP device driver, 1.6
[ 6.941909] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.942441] PPP generic driver version 2.4.2
[ 6.942570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.942579] ehci-pci: EHCI PCI platform driver
[ 6.943424] ehci-pci 0000:00:1f.5: EHCI Host Controller
[ 6.943437] ehci-pci 0000:00:1f.5: new USB bus registered, assigned bus number 1
[ 6.943807] ehci-pci 0000:00:1f.5: irq 23, io mem 0xf0903000
[ 6.952831] ehci-pci 0000:00:1f.5: USB 2.0 started, EHCI 1.00
[ 6.952895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.952897] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.952899] usb usb1: Product: EHCI Host Controller
[ 6.952900] usb usb1: Manufacturer: Linux 4.2.0-27-generic ehci_hcd
[ 6.952901] usb usb1: SerialNumber: 0000:00:1f.5
[ 6.953033] hub 1-0:1.0: USB hub found
[ 6.953039] hub 1-0:1.0: 12 ports detected
[ 6.953269] ehci-platform: EHCI generic platform driver
[ 6.953284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.953289] ohci-pci: OHCI PCI platform driver
[ 6.953818] ohci-pci 0000:00:1f.4: OHCI PCI host controller
[ 6.953824] ohci-pci 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 6.953860] ohci-pci 0000:00:1f.4: irq 23, io mem 0xf0902000
[ 7.009598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.009601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.009603] usb usb2: Product: OHCI PCI host controller
[ 7.009605] usb usb2: Manufacturer: Linux 4.2.0-27-generic ohci_hcd
[ 7.009606] usb usb2: SerialNumber: 0000:00:1f.4
[ 7.009749] hub 2-0:1.0: USB hub found
[ 7.009768] hub 2-0:1.0: 12 ports detected
[ 7.010250] ohci-platform: OHCI generic platform driver
[ 7.010266] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.010329] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 7.010849] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.010855] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.010972] mousedev: PS/2 mouse device common for all mice
[ 7.011324] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 7.011861] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 7.011979] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 7.011992] i2c /dev entries driver
[ 7.012089] device-mapper: uevent: version 1.0.3
[ 7.012157] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 7.012173] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.012251] PCCT header not found.
[ 7.012443] NET: Registered protocol family 10
[ 7.012690] NET: Registered protocol family 17
[ 7.012700] Key type dns_resolver registered
[ 7.012918] Loading compiled-in X.509 certificates
[ 7.013804] Loaded X.509 cert 'Build time autogenerated kernel key: 736e2f9ea1b4728a15ac169b1869267e1128d6e8'
[ 7.013821] registered taskstats version 1
[ 7.013842] zswap: loading zswap
[ 7.013845] zswap: using zbud pool
[ 7.013849] zswap: using lzo compressor
[ 7.015672] Key type trusted registered
[ 7.018880] Key type encrypted registered
[ 7.018887] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.018891] ima: No TPM chip found, activating TPM-bypass!
[ 7.018914] evm: HMAC attrs: 0x1
[ 7.019393] Magic number: 0:185:478
[ 7.019398] rtc rtc0: hash matches
[ 7.019481] rtc_cmos 00:02: setting system clock to 2016-09-29 10:27:51 UTC (1475144871)
[ 7.019545] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.019546] EDD information not available.
[ 7.019592] PM: Hibernation image not present or could not be loaded.
[ 7.100658] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 7.101059] ata2.00: configured for UDMA/33
[ 7.101515] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 7.102226] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[ 7.102229] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.102338] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.102673] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 7.103576] Freeing unused kernel memory: 1468K (ffffffff81d38000 - ffffffff81ea7000)
[ 7.103580] Write protecting the kernel read-only data: 12288k
[ 7.103952] Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
[ 7.104137] Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
[ 7.125162] systemd-udevd[99]: starting version 204
[ 7.163000] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.163003] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.533846] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.597812] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:45:cf:f3
[ 7.597820] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 7.597904] ahci 0000:00:1f.2: version 3.0
[ 7.598588] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 7.598765] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 7.598767] ahci 0000:00:1f.2: flags: 64bit ncq stag only ccc
[ 7.603033] scsi host2: ahci
[ 7.603184] ata3: SATA max UDMA/133 abar m8192@0xf0900000 port 0xf0900100 irq 24
[ 7.740597] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 7.900733] tsc: Refined TSC clocksource calibration: 1994.982 MHz
[ 7.900741] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3983545a8c0, max_idle_ns: 881590803241 ns
[ 7.920885] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.921208] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 7.921213] ata3.00: 31169232 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 7.921891] ata3.00: configured for UDMA/133
[ 7.922092] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 7.922550] sd 2:0:0:0: [sda] 31169232 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 7.922639] sd 2:0:0:0: [sda] Write Protect is off
[ 7.922644] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.922682] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.923126] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.924462] sda: sda1 sda2 < sda5 >
[ 7.924883] sd 2:0:0:0: [sda] Attached SCSI disk
[ 8.005973] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.014567] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 8.014571] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 8.014573] usb 2-1: Product: USB Tablet
[ 8.014574] usb 2-1: Manufacturer: VirtualBox
[ 8.225107] usb 2-2: new full-speed USB device number 3 using ohci-pci
[ 8.535620] usb 2-2: New USB device found, idVendor=046d, idProduct=c29b
[ 8.535624] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 8.535626] usb 2-2: Product: G27 Racing Wheel
[ 8.777048] usb 2-3: new full-speed USB device number 4 using ohci-pci
[ 9.080121] usb 2-3: New USB device found, idVendor=054c, idProduct=05c4
[ 9.080125] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.080127] usb 2-3: Product: Wireless Controller
[ 9.080128] usb 2-3: Manufacturer: Sony Computer Entertainment
[ 9.292715] usb 2-4: new full-speed USB device number 5 using ohci-pci
[ 9.613522] usb 2-4: New USB device found, idVendor=10c4, idProduct=ea60
[ 9.613525] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.613527] usb 2-4: Product: CP2102 USB to UART Bridge Controller
[ 9.613529] usb 2-4: Manufacturer: Silicon Labs
[ 9.613530] usb 2-4: SerialNumber: 0001
[ 10.172408] floppy0: no floppy controllers found
[ 10.172544] work still pending
[ 10.304457] random: init urandom read with 43 bits of entropy available
[ 10.352575] init: plymouth-upstart-bridge main process (151) terminated with status 1
[ 10.352586] init: plymouth-upstart-bridge main process ended, respawning
[ 10.371462] init: plymouth-upstart-bridge main process (161) terminated with status 1
[ 10.371478] init: plymouth-upstart-bridge main process ended, respawning
[ 10.383721] init: plymouth-upstart-bridge main process (164) terminated with status 1
[ 10.383733] init: plymouth-upstart-bridge main process ended, respawning
[ 11.688311] Adding 3780604k swap on /dev/sda5. Priority:-1 extents:1 across:3780604k FS
[ 11.697529] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.891177] systemd-udevd[300]: starting version 204
[ 12.038521] lp: driver loaded but no devices found
[ 12.064006] ppdev: user-space parallel port driver
[ 12.140673] vboxguest: module verification failed: signature and/or required key missing - tainting kernel
[ 12.229398] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[ 12.246455] intel_rng: FWH not detected
[ 12.252934] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 12.298654] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input5
[ 12.298888] vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 12.298891] vboxguest: Successfully loaded version 5.0.26 (interface 0x00010004)
[ 12.300008] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[ 12.346038] leds_ss4200: no LED devices found
[ 12.362292] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.362417] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[ 12.420632] random: nonblocking pool is initialized
[ 12.437671] Bluetooth: Core ver 2.20
[ 12.437709] NET: Registered protocol family 31
[ 12.437711] Bluetooth: HCI device and connection manager initialized
[ 12.437715] Bluetooth: HCI socket layer initialized
[ 12.437717] Bluetooth: L2CAP socket layer initialized
[ 12.437723] Bluetooth: SCO socket layer initialized
[ 12.446697] audit: type=1400 audit(1475144876.921:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
[ 12.446704] audit: type=1400 audit(1475144876.921:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[ 12.446708] audit: type=1400 audit(1475144876.921:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[ 12.447095] audit: type=1400 audit(1475144876.921:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[ 12.447100] audit: type=1400 audit(1475144876.921:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[ 12.447308] audit: type=1400 audit(1475144876.921:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[ 12.473162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.473165] Bluetooth: BNEP filters: protocol multicast
[ 12.473169] Bluetooth: BNEP socket layer initialized
[ 12.476312] Bluetooth: RFCOMM TTY layer initialized
[ 12.476317] Bluetooth: RFCOMM socket layer initialized
[ 12.476323] Bluetooth: RFCOMM ver 1.11
[ 12.631239] audit: type=1400 audit(1475144877.105:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=469 comm="apparmor_parser"
[ 12.631246] audit: type=1400 audit(1475144877.105:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=469 comm="apparmor_parser"
[ 12.631601] audit: type=1400 audit(1475144877.105:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=469 comm="apparmor_parser"
[ 12.671765] [drm] Initialized drm 1.1.0 20060810
[ 12.945099] hidraw: raw HID events driver (C) Jiri Kosina
[ 12.958723] usbcore: registered new interface driver usbserial
[ 12.958751] usbcore: registered new interface driver usbserial_generic
[ 12.958776] usbserial: USB Serial support registered for generic
[ 12.961968] usbcore: registered new interface driver cp210x
[ 12.962162] usbserial: USB Serial support registered for cp210x
[ 12.962182] cp210x 2-4:1.0: cp210x converter detected
[ 12.962313] [drm] VRAM 00c00000
[ 12.962574] usb 2-4: cp210x converter now attached to ttyUSB0
[ 12.967988] [TTM] Zone kernel: Available graphics memory: 1819928 kiB
[ 12.967991] [TTM] Initializing pool allocator
[ 12.967996] [TTM] Initializing DMA pool allocator
[ 12.969423] checking generic (e0000000 130000) vs hw (e0000000 1000000)
[ 12.969425] fb: switching to vboxdrmfb from VESA VGA
[ 12.969466] Console: switching to colour dummy device 80x25
[ 12.969753] fbcon: vboxdrmfb (fb0) is primary device
[ 12.969844] Console: switching to colour frame buffer device 100x37
[ 12.969857] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[ 12.969859] vboxvideo 0000:00:02.0: registered panic notifier
[ 12.969862] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[ 13.001853] usbcore: registered new interface driver usbhid
[ 13.001856] usbhid: USB HID core driver
[ 13.177162] AVX version of gcm_enc/dec engaged.
[ 13.177166] AES CTR mode by8 optimization enabled
[ 13.242582] audit: type=1400 audit(1475144877.717:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=540 comm="apparmor_parser"
[ 13.515976] intel_rapl: no valid rapl domains found in package 0
[ 13.558573] init: failsafe main process (573) killed by TERM signal
[ 14.004540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.005265] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 14.005617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.009774] snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
[ 14.250967] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input7
[ 14.252967] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:1f.4-1/input0
[ 14.372582] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2:1.0/0003:046D:C29B.0002/input/input8
[ 14.373103] logitech 0003:046D:C29B.0002: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-2/input0
[ 14.377164] logitech 0003:046D:C29B.0002: Force feedback support for Logitech Gaming Wheels
[ 14.540628] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 14.596724] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:054C:05C4.0003/input/input9
[ 14.597088] sony 0003:054C:05C4.0003: input,hidraw2: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-3/input0
[ 15.520763] floppy0: no floppy controllers found
[ 15.520818] work still pending
[ 16.243463] vboxsf: Successfully loaded version 5.0.26 (interface 0x00010004)
[ 16.320947] init: plymouth-upstart-bridge main process ended, respawning
[ 16.340350] init: plymouth-upstart-bridge main process ended, respawning
[ 19.421850] VBoxService 5.0.26 r108824 (verbosity: 0) linux.amd64 (Jul 18 2016 13:51:44) release log
[ 19.421850] 00:00:00.000115 main Log opened 2016-09-29T10:28:03.902290000Z
[ 19.421916] 00:00:00.000223 main OS Product: Linux
[ 19.421951] 00:00:00.000264 main OS Release: 4.2.0-27-generic
[ 19.421985] 00:00:00.000298 main OS Version: #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016
[ 19.422028] 00:00:00.000332 main Executable: /opt/VBoxGuestAdditions-5.0.26/sbin/VBoxService
[ 19.422028] 00:00:00.000333 main Process ID: 1823
[ 19.422028] 00:00:00.000334 main Package type: LINUX_64BITS_GENERIC
[ 19.431284] 00:00:00.009566 main 5.0.26 r108824 started. Verbose level = 0
[ 19.451988] 00:00:00.030268 automount vbsvcAutoMountWorker: Shared folder 'tiagovaz' was mounted to '/media/sf_tiagovaz'
[ 19.789354] init: plymouth-stop pre-start process (1892) terminated with status 1
[ 21.446452] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 21.458827] ISO 9660 Extensions: RRIP_1991A
[ 81.151953] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2:1.0/0003:046D:C29B.0004/input/input10
[ 81.152172] logitech 0003:046D:C29B.0004: input,hidraw1: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-2/input0
[ 81.152264] logitech 0003:046D:C29B.0004: Force feedback support for Logitech Gaming Wheels
[ 81.402599] usb 2-3: reset full-speed USB device number 4 using ohci-pci
[ 81.740250] input: G27 Racing Wheel as /devices/virtual/misc/uhid/0006:046D:C29B.0005/input/input11
[ 81.740449] hid-generic 0006:046D:C29B.0005: input,hidraw1: <UNKNOWN> HID v1.11 Multi-Axis Controller [G27 Racing Wheel] on
[ 156.041268] input: G27 Racing Wheel as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2:1.0/0003:046D:C29B.0006/input/input12
[ 156.041437] logitech 0003:046D:C29B.0006: input,hidraw2: USB HID v1.11 Joystick [G27 Racing Wheel] on usb-0000:00:1f.4-2/input0
[ 156.041525] logitech 0003:046D:C29B.0006: Force feedback support for Logitech Gaming Wheels
[ 156.057383] cp210x ttyUSB0: usb_serial_generic_write_bulk_callback - urb stopped: -32
[ 156.206082] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1f.4/usb2/2-3/2-3:1.0/0003:054C:05C4.0007/input/input13
[ 156.206202] sony 0003:054C:05C4.0007: input,hidraw1: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1f.4-3/input0
Re: Ubuntu 14.04 GIMX 5.9 g27 f1 2016
It looks like there is a hardware issue. Check the USB cables. Also try changing the USB port.
GIMX creator