My setup basically works, but using my G27 on Project Cars on a PS4, I cannot steer after a few minutes, I even can't press the PS Button on the DS4.
I have to disconnect the cable to the DS4, gimx terminates on my shell, I have to reconnect the cable and restart GIMX.
There is no useful log. Is there an option to be more verbose?
Code: Select all
[~]$ gimx --config LogitechG27_G29.xml --port /dev/ttyUSB0 --log gimx.log
option -c with value `LogitechG27_G29.xml'
option -p with value `/dev/ttyUSB0'
Code: Select all
[~/.gimx/log]$ tail -f gimx.log
option -l with value `gimx.log'
native mode is already enabled for HID device 02:02 (PID=c29b)
Detected USB adapter: G29 PS4.
using default refresh period: 5.00ms
libusb_transfer failed with status LIBUSB_TRANSFER_NO_DEVICE (endpoint=0x84)
tail: gimx.log: file truncated
native mode is already enabled for HID device 02:02 (PID=c29b)
Detected USB adapter: G29 PS4.
using default refresh period: 5.00ms
libusb_transfer failed with status LIBUSB_TRANSFER_NO_DEVICE (endpoint=0x81)
src/linux/usbhidasync.c:202 submit_transfer: libusb_submit_transfer failed with error: No such device (it may have been disconnected)