Hello,
i am not able to install the newes version of gimx on my raspberry pi.
i always get the message "Dependency is not satisfiable: libstdc++6 (>= 4.9)
http://s8.postimg.org/uhra2sclx/image.png
i really tried everything i could to update libstdc++6, but it seems like there is no higher version than 4.8 for my Pi available :/
pi@raspberrypi ~ $ uname -a
Linux raspberrypi 4.1.13+ #826 PREEMPT Fri Nov 13 20:13:22 GMT 2015 armv6l GNU/Linux
help
GIMX 5.4 on RaspberryPi
Re: GIMX 5.4 on RaspberryPi
Hi,
You are probably using Raspbian Wheezy. The only supported Raspbian version is now Jessie.
You are probably using Raspbian Wheezy. The only supported Raspbian version is now Jessie.
GIMX creator
Re: GIMX 5.4 on RaspberryPi
yeah, i switched to Jessie and was able to install 5.4!!
but now i have another problem:
I try to use the Pi with the DIY-USB Adapter.
But its stuttering like hell! Impossible to play. I dont know whats wrong. Probably something with the CP2102...
I try to setup Pi over Bluetooth. With Weezy Bluetooth worked fine...
but now i have another problem:
I try to use the Pi with the DIY-USB Adapter.
But its stuttering like hell! Impossible to play. I dont know whats wrong. Probably something with the CP2102...
I try to setup Pi over Bluetooth. With Weezy Bluetooth worked fine...
Re: GIMX 5.4 on RaspberryPi
Your mouse is probably being polled too fast.
Try adding usbhid.mousepoll=4 to the /boot/cmdline.txt file and reboot.
If it still lags, try values higher than 4.
Try adding usbhid.mousepoll=4 to the /boot/cmdline.txt file and reboot.
If it still lags, try values higher than 4.
GIMX creator
Re: GIMX 5.4 on RaspberryPi
aaahh it worked!!!
usbhid.mousepoll=4 - are this 250Hz?
usbhid.mousepoll=4 - are this 250Hz?