PS4 DIY USB HELP PLZ

[kurganxy]

HI. I'm pretty new to this, so I'm probably making a really obvious mistake, but for the life of me, I cant figure out what.

I put together a teensy board with the USB adapter. I'm pretty sure the pins are correct D2-RXD D3-TXD. I flashed the teensy with ATMEGA32U4 from the EMUPS4 folder. I installed the GIMX x64 4.3 software and the CP210x driver. I'm running windows 10. My keyboard is a Razer Deathstalker. My mouse is a ROG GX1000 Eagle Eye. I'm using a powered Amazon Basics USB 2.0 hub since my laptop only has 1 USB 2.0 port.

Config File:
http://pastebin.com/8gk4C8p0

My Launcher Settings (tried with either GUI and terminal checked, and both unchecked)



I get this flashed really fast and then nothing.


Any idea what I'm doing wrong? Any help would be greatly appreciated

[Matlo]

Hi,
Sometimes the pins of the CP2102 adapters are mislabeled, so I suggest you to try to swap RX and TX.
Please post a clear photo of your wiring, and post the details requested here: http://gimx.fr/forum/viewtopic.php?f=5&t=691

[kurganxy]

Thanks for replying so quickly. I actually had to switch the wires around yesterday because when i went back to read the instructions, i noticed that TX wasnt the same as TXD. Same with RX and RXD, but the only difference was that the pop up cmd window was a little slower when the wires were set up right. before, it just flashed really fast so i couldnt even read the text.


the GIMX software version: 4.3

the OS: Windows 7/8 32/64bits, Ubuntu 32/64bits, other Linux distro...: Windows 10 x64

the adapter
bluetooth
model
manufacturer
version

DIY USB adapter
USB to serial adapter:http://www.ebay.com/itm/251405447983?_t ... EBIDX%3AIT
AVR USB board: Teensy 2.0 with pins
Firmware (version + folder + file) : firmware 4.3 > EMUPS4 > atmega32u4.hex

GPP/Cronus/Titan... :no idea what this is

the console: PS3 (fat, slim, superslim...), 360, PS4, XOne: PS4

the game: none yet, but planning to use it with Destiny first

the controller: mouse/keyboard/joystick brand+model: Mouse: Asus GX1000 Eagle Eye
Keyboard: Razer Deathstalker

Pics: (i had to untape everything)
Adapter:

Teensy:

Im using a USB hub to plug everything in (ie adapter, keyboard, mouse).

[kurganxy]

I forgot to include how everthing is connected.

USB-miniUSB from PS4 to teensy

Female USB-Male USB from UART to USB hub

USB hub to Laptop

Keyboard and mouse to USB hub

I have some questions also:
1. Do i need to be logged into my PS account first or should i not be logged on.
2. Should my Dualshock4 be on or off?
3. Do i need to connect anything to my Dualshock4 like with XIM4?
4. Do i need a Bluetooth Dongle?

[Kakiharasama]

Im still new here but I would like to share my info that I have acquired so far. I have been using GIMX on the PS3 with a raspberry pi 2 b, but over the last week I have started playing with a usb adapter on the Xbox One and PS3 just to see how it works.

1. Do i need to be logged into my PS account first or should i not be logged on.

You can be logged on to psn it does not matter

2. Should my Dualshock4 be on or off?

As far as I know it should be connected to your pc/laptop since it needs to authenticate to the PS4

3. Do i need to connect anything to my Dualshock4 like with XIM4?

Just a micro usb cable that goes to your pc/laptop

4. Do i need a Bluetooth Dongle?

Bluetooth wont work on windows only on linux

What driver did you install for the DS4 if you already connected it to the laptop

[kurganxy]

ok, so i do have to conect my dualshock to my PC? where do i egt the driver for that? And im assuming it has to be on.

[Kakiharasama]

Yes

You can use Zadig to install the correct driver http://zadig.akeo.ie/

PS4 "Wireless Controller" 054C:05C4

select "libusbK" as target driver
click on the drop down menu, and select "Install Driver"
click on "Replace Driver"

Taken From the WiKi

http://gimx.fr/wiki/index.php?title=Installation

[kurganxy]

That didnt help Oh well. I just bought a titan one. Hopefully it will work when i dont have to rely on something i put together myself Thanks for your help though...

[Matlo]

Hi,
Did you power on your PS4 before starting GIMX?