Hi, everyone,
I am a newbie to using GIMX(serialusb). Currently, I use the serialusb source and build it on the Pi4, but when I run the serialusb-capture.sh , I always got a timeout error.
```
Failed to start the proxy: initialization timeout expired!
```
This is my device flow:
USB keyboard-> pi4-> usb to uart(CP2102, FT232)-> arduino leonardo -> window10 pc.
I also use other arduino board to test the usb to uart cable, I can receive the data from the cable.
my arduino board have use GIMX launcher to update the firmware.
Does anyone know what's the timeout issue?
thanks a lot.
arduino leonardo board with cp2102 USB to UART not working
-
- Posts: 3
- Joined: Mon Oct 09, 2023 7:18 am
-
- Posts: 3
- Joined: Sun Oct 08, 2023 5:11 am
Re: arduino leonardo board with cp2102 USB to UART not working
Did you ever find a fix, This is my setup too.
-
- Posts: 3
- Joined: Mon Oct 09, 2023 7:18 am
Re: arduino leonardo board with cp2102 USB to UART not working
It's not fixed yet, but I'm trying to buy a CP2104 chip for testing. I am not sure which part is wrong.
-
- Posts: 3
- Joined: Mon Oct 09, 2023 7:18 am
Re: arduino leonardo board with cp2102 USB to UART not working
Update:
When using CP2104 with the pro micro board, the GIMX is working now.
When using CP2104 with the pro micro board, the GIMX is working now.
Re: arduino leonardo board with cp2102 USB to UART not working
Thanks for the report.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike