Hi Guys, not sure if this is a new wondows update issue or what. I used to have no issues running the GIMX playing project cars 2 on PS4. It seem to only be lasting 10 mins at a time before it's like the controller locks up. I then have to Shift+ESC to disconnect the controller from the PS4 and start it up again. I can resume fine for another 10 mins. The controller timeout on the PS4 is set to 60mins so I'm thinking its something the PC side. Like a USB blip or reset. I've closed any software that might be interfering with the controllers I'm using on the PC side but none of that has made a difference. I've reinstalled GIMX and have tried running it as Admin but nothing affects the hang. Any ideas you think I can try. There are no erros reported in the CMD window.
global option -c with value `SimuCube-CSP-CSH-F1.xml'
controller #1: option -p with value `COM4'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
auto-grab flag is set
GIMX adapter detected, controller type is: G29 PS4.
Firmware version: 8.0
Reset sent to the GIMX adapter.
Current baudrate: 500000 bps.
Trying baudrate: 2000000 bps.
Using baudrate: 2000000 bps.
found pass-through device 0x054c:0x05c4
rounding timer period 1000us to 992us
registered joystick 0 with name "PS4 Controller"
using default refresh period: 5.00ms
Warning: macros are not available for: joystick FANATEC ClubSport USB Adapter (shifter mode) (0)
Haptic core has source haptic_source_lg for device 046d:c260
Haptic core has sink haptic_sink_os for joystick 2 (SimuCUBE)
Press the key/button assigned to PS.
rounding timer period 5000us to 4960us
Warning: skipping unsupported command DEFAULT_SPRING_ON
adjust your wheel range to 900 degrees
Warning: skipping unsupported command DEFAULT_SPRING_OFF
The other thing is that the actual PS4 controller that is connected to the USB of the PS4 also hangs in the PS4. That one cannot be recovered until I restart the PS4.
Just a quick question, the controller you are using for authentication is it a genuine controller or one of those generic ones?
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX .
GIMX needs the Dualshock 4 to be turned off (as stated in the documentation). Press the PS button until it turns off, and then connect the USB cable to the PC.