DFP not run emulation

[Useus]

it stalls in this screen and it does not appear to me "press the PS button"

how to fix it? Thanks!!
Teensy++ 2.0 (flashed firmware from gimx install folder)- FTDI ft232rl

[Matlo]

Hi

Are you wanting to play on PS4?
The right firmware for the PS4 is the EMUG29PS4 one.

[Useus]

i have used EMUDFPPS2 (drivin force pro from list)
now i try with EMUG29PS4

[Useus]

Now I'll see "press the PS button" but automatically disconnect the dualshock 4 from the pc and pressing the ps button from the DFP will not do anything

[Matlo]

First, your config may be incorrect. You should probably use the "Help>Get configs" menu to get the pre-made config that matches your wheel.
Second, you are using a Teensy++ 2.0, which is based on the at90usb1286 chip. The firmware for this chip is known to have issues (https://github.com/matlo/GIMX/issues/367).

[Useus]

yes i have tried with gimx configurations and my configuration
my teensy++ 2.0 is at90usb1286


is there a way to make it work =?

[Matlo]

Please provide a log file as requested here: https://gimx.fr/forum/viewtopic.php?f=5&t=691
And press the PS button while the log file is being generated.

[Useus]

https://pastebin.com/TvAB7mmk

i have pressed PS button 3 times, in log file result various times

original logitechdrivigforcepro_G29.xml

[Matlo]

It looks like you've hit the at90usb1286 firmware issue. Sadly there is no way to make it work right now.

[Useus]

thank for response