Difference between revisions of "DIY USB adapter for dummies"

From GIMX
Jump to: navigation, search
(Marked this version for translation)
Line 1: Line 1:
 
<languages />
 
<languages />
 
<translate>
 
<translate>
 +
<!--T:1-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-header.png
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-header.png
  
 +
<!--T:2-->
 
This tutorial focuses on simplicity and easiness. If you want more details, please read the [[DIY_USB_adapter]] page.
 
This tutorial focuses on simplicity and easiness. If you want more details, please read the [[DIY_USB_adapter]] page.
  
 +
<!--T:3-->
 
Welcome to the straight-to-the-point tutorial on how to build the GIMX PC to PS3 USB adapter, solderless!<br/ >
 
Welcome to the straight-to-the-point tutorial on how to build the GIMX PC to PS3 USB adapter, solderless!<br/ >
 
Everything you need to know to build and get started with the adapter is covered here if you read it carefully!<br/ >
 
Everything you need to know to build and get started with the adapter is covered here if you read it carefully!<br/ >
 
I suggest you read it through at least once, just to have a heads up on what you're going to do.
 
I suggest you read it through at least once, just to have a heads up on what you're going to do.
  
=Get the required parts=
+
=Get the required parts= <!--T:4-->
  
 +
<!--T:5-->
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=UART+Serial+Converter+CP2102 USB 2.0 to UART TTL 6PIN Module Serial Converter CP2102]
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=UART+Serial+Converter+CP2102 USB 2.0 to UART TTL 6PIN Module Serial Converter CP2102]
 
:It should come with a set of cables and look [http://gimx.fr/img/screenshots/tuto/gfd/gfd-cp2102.jpg like this].
 
:It should come with a set of cables and look [http://gimx.fr/img/screenshots/tuto/gfd/gfd-cp2102.jpg like this].
Line 16: Line 20:
 
:You need the one with pins to be able to connect everything without soldering.
 
:You need the one with pins to be able to connect everything without soldering.
  
 +
<!--T:6-->
 
And if you don't already have it, you need to get some USB cables, like these:
 
And if you don't already have it, you need to get some USB cables, like these:
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=mini+usb+a+male+to+usb+b+5+pin+male+retractable Mini USB A Male to USB B 5 Pin Male Retractable Cable]
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=mini+usb+a+male+to+usb+b+5+pin+male+retractable Mini USB A Male to USB B 5 Pin Male Retractable Cable]
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=usb+male+to+female+extension+retractable USB Male to Female Extension Retractable Cable]
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=usb+male+to+female+extension+retractable USB Male to Female Extension Retractable Cable]
  
 +
<!--T:7-->
 
Optional:
 
Optional:
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=plastic+project+box A project box] to contain all the parts.
 
*[http://www.ebay.com/sch/i.html?rt=nc&LH_BIN=1&_nkw=plastic+project+box A project box] to contain all the parts.
Line 28: Line 34:
 
:For bundling everything up - easy to undo and redo if you don't get it right the first time.
 
:For bundling everything up - easy to undo and redo if you don't get it right the first time.
  
 +
<!--T:8-->
 
And hopefully you have some basic tools like a hobby/utility knife or scissors laying around.
 
And hopefully you have some basic tools like a hobby/utility knife or scissors laying around.
  
 +
<!--T:9-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-parts.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-parts.jpg
  
=Download the required software, firmware and drivers=
+
=Download the required software, firmware and drivers= <!--T:10-->
  
==Windows==
+
==Windows== <!--T:11-->
  
 +
<!--T:12-->
 
*[http://gimx.fr/download/gimx-windows.html GIMX software]
 
*[http://gimx.fr/download/gimx-windows.html GIMX software]
 
*[http://gimx.fr/download/gimx-firmwares.html GIMX firmware]
 
*[http://gimx.fr/download/gimx-firmwares.html GIMX firmware]
Line 41: Line 50:
 
*[http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/Software/CP210x_VCP_Win_XP_S2K3_Vista_7.exe Serial converter drivers]
 
*[http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/Software/CP210x_VCP_Win_XP_S2K3_Vista_7.exe Serial converter drivers]
  
 +
<!--T:13-->
 
For easy access later on, just save/extract all the files to your desktop.
 
For easy access later on, just save/extract all the files to your desktop.
  
 +
<!--T:14-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-files.png
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-files.png
  
==Ubuntu==
+
==Ubuntu== <!--T:15-->
  
 +
<!--T:16-->
 
*[http://gimx.fr/download/gimx-ubuntu-32bits.html GIMX software, 32bit] / [http://gimx.fr/download/gimx-ubuntu-64bits.html GIMX software, 64bit]
 
*[http://gimx.fr/download/gimx-ubuntu-32bits.html GIMX software, 32bit] / [http://gimx.fr/download/gimx-ubuntu-64bits.html GIMX software, 64bit]
 
*[http://www.youtube.com/watch?v=yHwBcIUWBZA See this video] for some important installation instructions!
 
*[http://www.youtube.com/watch?v=yHwBcIUWBZA See this video] for some important installation instructions!
Line 53: Line 65:
 
:(You will have to follow the instructions on that page if you want to use the Teensy Loader with Ubuntu)
 
:(You will have to follow the instructions on that page if you want to use the Teensy Loader with Ubuntu)
  
=Assemble the adapter=
+
=Assemble the adapter= <!--T:17-->
  
 +
<!--T:18-->
 
To begin with, I recommend you insulate the serial converter using the electrical tape if it's going to be in a tight enclosure, to avoid any shorts between it and the Teensy.
 
To begin with, I recommend you insulate the serial converter using the electrical tape if it's going to be in a tight enclosure, to avoid any shorts between it and the Teensy.
  
 +
<!--T:19-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-insulate.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-insulate.jpg
  
 +
<!--T:20-->
 
Now connect the cables as shown in the picture below.
 
Now connect the cables as shown in the picture below.
 
(Notice how the Teensy is placed! Pins should point left with the USB connector pointing away from you.)
 
(Notice how the Teensy is placed! Pins should point left with the USB connector pointing away from you.)
  
 +
<!--T:21-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-cablesgohere.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-cablesgohere.jpg
  
 +
<!--T:22-->
 
The next two steps are only required if you're putting the parts in a very tight enclosure and need the parts to take up as little space as possible.
 
The next two steps are only required if you're putting the parts in a very tight enclosure and need the parts to take up as little space as possible.
  
 +
<!--T:23-->
 
1. Bend the pins with the jumper cables attached to them inwards, slowly to prevent them from snapping, and tuck the cables between the pins on the opposite side.
 
1. Bend the pins with the jumper cables attached to them inwards, slowly to prevent them from snapping, and tuck the cables between the pins on the opposite side.
  
 +
<!--T:24-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-bend-1.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-bend-1.jpg
  
 +
<!--T:25-->
 
2. To save some extra space, I usually wrap the cables around the Teensy.
 
2. To save some extra space, I usually wrap the cables around the Teensy.
 
There's no special way of doing this, so you just need to figure out what works best for your build.
 
There's no special way of doing this, so you just need to figure out what works best for your build.
  
 +
<!--T:26-->
 
Remember not to cover up the button on the Teensy as we need to press it later on.
 
Remember not to cover up the button on the Teensy as we need to press it later on.
 
(Also, this is where the rubber band will come in handy!)
 
(Also, this is where the rubber band will come in handy!)
  
 +
<!--T:27-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-bundle.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-bundle.jpg
  
 +
<!--T:28-->
 
If you want, you can also place the serial converter so that the pins and jumper cables go in between the rows of pins on the Teensy.
 
If you want, you can also place the serial converter so that the pins and jumper cables go in between the rows of pins on the Teensy.
 
It's a very snug fit though so you should use some electrical tape to insulate the pins on the serial converter because they will touch the Teensy ones if you don't.
 
It's a very snug fit though so you should use some electrical tape to insulate the pins on the serial converter because they will touch the Teensy ones if you don't.
  
 +
<!--T:29-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-insulate2.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-insulate2.jpg
  
 +
<!--T:30-->
 
Cut some holes in your project box of choice to match the Mini USB plug on one side and regular USB plug on the other side.
 
Cut some holes in your project box of choice to match the Mini USB plug on one side and regular USB plug on the other side.
 
Do some tests and make sure everything aligns up before securing everything in place. In the picture below I've bundled everything up using the rubber band and secured it to the box with some electrical tape (double sided tape or hot glue works wonders too if you have it)
 
Do some tests and make sure everything aligns up before securing everything in place. In the picture below I've bundled everything up using the rubber band and secured it to the box with some electrical tape (double sided tape or hot glue works wonders too if you have it)
  
 +
<!--T:31-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-matchdapter.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-matchdapter.jpg
  
 +
<!--T:32-->
 
Voilà! You're done building the adapter.
 
Voilà! You're done building the adapter.
  
=Load the firmware onto the adapter=
+
=Load the firmware onto the adapter= <!--T:33-->
  
 +
<!--T:34-->
 
Connect the adapter to your computer using the USB Mini-B cable and a LED on the Teensy should turn on or start blinking.
 
Connect the adapter to your computer using the USB Mini-B cable and a LED on the Teensy should turn on or start blinking.
  
 +
<!--T:35-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-loadfirmware.png
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-loadfirmware.png
  
 +
<!--T:36-->
 
Now start up Teensy Loader (teensy.exe on your desktop) and follow these steps:
 
Now start up Teensy Loader (teensy.exe on your desktop) and follow these steps:
  
 +
<!--T:37-->
 
Press the button on the Teensy and the LED should turn off.
 
Press the button on the Teensy and the LED should turn off.
 
In Teensy Loader, open atmega32u4.hex from the firmwares folder on your desktop.
 
In Teensy Loader, open atmega32u4.hex from the firmwares folder on your desktop.
Line 103: Line 134:
 
Now click the Reboot button and your GIMX USB adapter is ready for use!
 
Now click the Reboot button and your GIMX USB adapter is ready for use!
  
 +
<!--T:38-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-connect.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-connect.jpg
  
 +
<!--T:39-->
 
NOTE! You can now unplug the USB Mini-B cable from your computer.
 
NOTE! You can now unplug the USB Mini-B cable from your computer.
 
The USB Mini-B cable will only be connected to your computer when upgrading the firmware from now on.
 
The USB Mini-B cable will only be connected to your computer when upgrading the firmware from now on.
 
When in use, the USB Mini-B cable is connected to your console.
 
When in use, the USB Mini-B cable is connected to your console.
  
=Install the GIMX software=
+
=Install the GIMX software= <!--T:40-->
  
 +
<!--T:41-->
 
This step is pretty straight forward.
 
This step is pretty straight forward.
 
Simply run setup-X.YZ.exe from your desktop and follow the installation steps, preferably with the default installation location.
 
Simply run setup-X.YZ.exe from your desktop and follow the installation steps, preferably with the default installation location.
  
 +
<!--T:42-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-setupgimx2.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-setupgimx2.jpg
  
 +
<!--T:43-->
 
When the installation is done you should have three GIMX icons on your desktop.
 
When the installation is done you should have three GIMX icons on your desktop.
  
 +
<!--T:44-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-icons.png
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-icons.png
  
 +
<!--T:45-->
 
'''Configuration basics'''
 
'''Configuration basics'''
  
 +
<!--T:46-->
 
GIMX comes pre-loaded with a few configurations, but let's take a quick look on how you can make your own configurations using the GIMX FPS Config Tool (As you can tell by the name, this is mainly meant for setting up a basic FPS configuration.)
 
GIMX comes pre-loaded with a few configurations, but let's take a quick look on how you can make your own configurations using the GIMX FPS Config Tool (As you can tell by the name, this is mainly meant for setting up a basic FPS configuration.)
  
 +
<!--T:47-->
 
[http://www.youtube.com/watch?feature=player_embedded&v=2cxBGMWBpzM Youtube video]
 
[http://www.youtube.com/watch?feature=player_embedded&v=2cxBGMWBpzM Youtube video]
  
 +
<!--T:48-->
 
You can also check out the Configuration Requests and Index thread for other configurations available for download, or post requests that we or the community might be able to fulfill.
 
You can also check out the Configuration Requests and Index thread for other configurations available for download, or post requests that we or the community might be able to fulfill.
  
 +
<!--T:49-->
 
NOTE!
 
NOTE!
 
:For Windows 32bit, downloaded configurations go in the C:\Program Files\GIMX\config folder.
 
:For Windows 32bit, downloaded configurations go in the C:\Program Files\GIMX\config folder.
 
:For Windows 64bit, downloaded configurations go in the C:\Program Files (x86)\GIMX\config folder.
 
:For Windows 64bit, downloaded configurations go in the C:\Program Files (x86)\GIMX\config folder.
  
=Good to go!=
+
=Good to go!= <!--T:50-->
  
 +
<!--T:51-->
 
That's it. You're ready to start using the GIMX USB adapter!
 
That's it. You're ready to start using the GIMX USB adapter!
  
 +
<!--T:52-->
 
*Connect the regular USB side to your PC and install the serial converter drivers (CP210x_VCP_Win_XP_S2K3_Vista_7.exe on your desktop)
 
*Connect the regular USB side to your PC and install the serial converter drivers (CP210x_VCP_Win_XP_S2K3_Vista_7.exe on your desktop)
 
:This is of course only required the very first time you use the adapter!
 
:This is of course only required the very first time you use the adapter!
  
 +
<!--T:53-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-contopc.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-contopc.jpg
  
 +
<!--T:54-->
 
*Connect the USB Mini-B side to your console, run gimx-serial and make sure the adapter is recognized on a COM port.
 
*Connect the USB Mini-B side to your console, run gimx-serial and make sure the adapter is recognized on a COM port.
 
:(If the Device box is blank, refer to the Support section and report the problem if a solution isn't found)
 
:(If the Device box is blank, refer to the Support section and report the problem if a solution isn't found)
  
 +
<!--T:55-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-comport.jpg
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-comport.jpg
  
 +
<!--T:56-->
 
*Select the config you made/downloaded from the drop down menu, click the Start button and a couple of windows should pop up to start capturing your mouse and keyboard input!
 
*Select the config you made/downloaded from the drop down menu, click the Start button and a couple of windows should pop up to start capturing your mouse and keyboard input!
  
 +
<!--T:57-->
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-selconfig.png
 
http://gimx.fr/img/screenshots/tuto/gfd/gfd-selconfig.png
  
 +
<!--T:58-->
 
Now if you're in the menus of your console and press the WASD or arrow keys on your keyboard, you should be able to navigate through the menus, meaning you've succeeded! If not, or if something went wrong elsewhere, go back and make sure you followed every step to the letter and try again, then let us know if nothing you try works.
 
Now if you're in the menus of your console and press the WASD or arrow keys on your keyboard, you should be able to navigate through the menus, meaning you've succeeded! If not, or if something went wrong elsewhere, go back and make sure you followed every step to the letter and try again, then let us know if nothing you try works.
  
 +
<!--T:59-->
 
Enjoy!
 
Enjoy!
  
=NB! Xbox 360 support=
+
=NB! Xbox 360 support= <!--T:60-->
  
 +
<!--T:61-->
 
Please note, as Xbox 360 support is in early experimental stages, this tutorial does not cover the usage of GIMX firmware version 0.30
 
Please note, as Xbox 360 support is in early experimental stages, this tutorial does not cover the usage of GIMX firmware version 0.30
 
The adapter in itself is however exactly the same, so if you would like to try out Xbox 360 support read this thread (currently only for Ubuntu)
 
The adapter in itself is however exactly the same, so if you would like to try out Xbox 360 support read this thread (currently only for Ubuntu)
 
</translate>
 
</translate>

Revision as of 11:39, 5 September 2012

Other languages:
Deutsch • ‎English • ‎français • ‎中文(中国大陆)‎

http://gimx.fr/img/screenshots/tuto/gfd/gfd-header.png

This tutorial focuses on simplicity and easiness. If you want more details, please read the DIY_USB_adapter page.

Welcome to the straight-to-the-point tutorial on how to build the GIMX PC to PS3 USB adapter, solderless!
Everything you need to know to build and get started with the adapter is covered here if you read it carefully!
I suggest you read it through at least once, just to have a heads up on what you're going to do.

Get the required parts

It should come with a set of cables and look like this.
You need the one with pins to be able to connect everything without soldering.

And if you don't already have it, you need to get some USB cables, like these:

Optional:

I'll be using a match box for this tutorial. Another popular DIY project box is an empty Altoids tin for example.
  • Electrical tape
For insulating or securing parts and cables in place. Regular adhesive tape should work as well.
  • Rubber band
For bundling everything up - easy to undo and redo if you don't get it right the first time.

And hopefully you have some basic tools like a hobby/utility knife or scissors laying around.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-parts.jpg

Download the required software, firmware and drivers

Windows

For easy access later on, just save/extract all the files to your desktop.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-files.png

Ubuntu

(You will have to follow the instructions on that page if you want to use the Teensy Loader with Ubuntu)

Assemble the adapter

To begin with, I recommend you insulate the serial converter using the electrical tape if it's going to be in a tight enclosure, to avoid any shorts between it and the Teensy.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-insulate.jpg

Now connect the cables as shown in the picture below. (Notice how the Teensy is placed! Pins should point left with the USB connector pointing away from you.)

http://gimx.fr/img/screenshots/tuto/gfd/gfd-cablesgohere.jpg

The next two steps are only required if you're putting the parts in a very tight enclosure and need the parts to take up as little space as possible.

1. Bend the pins with the jumper cables attached to them inwards, slowly to prevent them from snapping, and tuck the cables between the pins on the opposite side.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-bend-1.jpg

2. To save some extra space, I usually wrap the cables around the Teensy. There's no special way of doing this, so you just need to figure out what works best for your build.

Remember not to cover up the button on the Teensy as we need to press it later on. (Also, this is where the rubber band will come in handy!)

http://gimx.fr/img/screenshots/tuto/gfd/gfd-bundle.jpg

If you want, you can also place the serial converter so that the pins and jumper cables go in between the rows of pins on the Teensy. It's a very snug fit though so you should use some electrical tape to insulate the pins on the serial converter because they will touch the Teensy ones if you don't.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-insulate2.jpg

Cut some holes in your project box of choice to match the Mini USB plug on one side and regular USB plug on the other side. Do some tests and make sure everything aligns up before securing everything in place. In the picture below I've bundled everything up using the rubber band and secured it to the box with some electrical tape (double sided tape or hot glue works wonders too if you have it)

http://gimx.fr/img/screenshots/tuto/gfd/gfd-matchdapter.jpg

Voilà! You're done building the adapter.

Load the firmware onto the adapter

Connect the adapter to your computer using the USB Mini-B cable and a LED on the Teensy should turn on or start blinking.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-loadfirmware.png

Now start up Teensy Loader (teensy.exe on your desktop) and follow these steps:

Press the button on the Teensy and the LED should turn off. In Teensy Loader, open atmega32u4.hex from the firmwares folder on your desktop. Click the Program button and you should get the message "Download Complete" Now click the Reboot button and your GIMX USB adapter is ready for use!

http://gimx.fr/img/screenshots/tuto/gfd/gfd-connect.jpg

NOTE! You can now unplug the USB Mini-B cable from your computer. The USB Mini-B cable will only be connected to your computer when upgrading the firmware from now on. When in use, the USB Mini-B cable is connected to your console.

Install the GIMX software

This step is pretty straight forward. Simply run setup-X.YZ.exe from your desktop and follow the installation steps, preferably with the default installation location.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-setupgimx2.jpg

When the installation is done you should have three GIMX icons on your desktop.

http://gimx.fr/img/screenshots/tuto/gfd/gfd-icons.png

Configuration basics

GIMX comes pre-loaded with a few configurations, but let's take a quick look on how you can make your own configurations using the GIMX FPS Config Tool (As you can tell by the name, this is mainly meant for setting up a basic FPS configuration.)

Youtube video

You can also check out the Configuration Requests and Index thread for other configurations available for download, or post requests that we or the community might be able to fulfill.

NOTE!

For Windows 32bit, downloaded configurations go in the C:\Program Files\GIMX\config folder.
For Windows 64bit, downloaded configurations go in the C:\Program Files (x86)\GIMX\config folder.

Good to go!

That's it. You're ready to start using the GIMX USB adapter!

  • Connect the regular USB side to your PC and install the serial converter drivers (CP210x_VCP_Win_XP_S2K3_Vista_7.exe on your desktop)
This is of course only required the very first time you use the adapter!

http://gimx.fr/img/screenshots/tuto/gfd/gfd-contopc.jpg

  • Connect the USB Mini-B side to your console, run gimx-serial and make sure the adapter is recognized on a COM port.
(If the Device box is blank, refer to the Support section and report the problem if a solution isn't found)

http://gimx.fr/img/screenshots/tuto/gfd/gfd-comport.jpg

  • Select the config you made/downloaded from the drop down menu, click the Start button and a couple of windows should pop up to start capturing your mouse and keyboard input!

http://gimx.fr/img/screenshots/tuto/gfd/gfd-selconfig.png

Now if you're in the menus of your console and press the WASD or arrow keys on your keyboard, you should be able to navigate through the menus, meaning you've succeeded! If not, or if something went wrong elsewhere, go back and make sure you followed every step to the letter and try again, then let us know if nothing you try works.

Enjoy!

NB! Xbox 360 support

Please note, as Xbox 360 support is in early experimental stages, this tutorial does not cover the usage of GIMX firmware version 0.30 The adapter in itself is however exactly the same, so if you would like to try out Xbox 360 support read this thread (currently only for Ubuntu)