OSW Mmos to PS5

Need help? Ask here and someone will help
gamechanger
Posts: 49
Joined: Sun Feb 06, 2022 6:04 pm

Re: OSW Mmos to PS5

Post by gamechanger »

Foton wrote: Fri Apr 08, 2022 6:23 pm
GeekyDeaks wrote: Wed Apr 06, 2022 7:54 am
Foton wrote: Wed Apr 06, 2022 12:36 am Hi all. I have a SimCub 2 Pro and did everything according to the instructions. Thanks a lot to GeekyDeaks for the improvements.
Everything really works well, but I feel a big feedback dip in the middle, especially when going through various high-speed turns, such as red water at Spa or a series of chicanes in daytona, the first sector in Suzuka.
Has anyone been able to solve this problem or somehow compensate for the settings?
I tried to change both the configuration settings in GIMIX and in Simcube. Couldn't find anything good :(
Can I just confirm you are using the build that ends in '.4'? The earlier builds mistakenly try to correct the FFB around the zero point of the axis, whereas .4 smooths out the FFB values instead irrespective of the angle of the wheel. I should probably remove the earlier versions from github!

https://github.com/GeekyDeaks/GIMX/rele ... 8.0-g29c.4
That's right, I'm using version .4
I have been following your developments from the very beginning. Once I got all the necessary devices, I tried the latest version.
https://i.gyazo.com/37b4268c401f6ca243f ... a25151.png

I deleted all previous profiles and downloaded Logitech G27_G29 on first launch of v.4. After that I added the line
<g29_correction min_gain="20" range_start="1000" range_end="10000"/>

And then I tested various settings for my SimCube. I still don't understand how to remove the void in the middle :(
I want to try on PS4 without DriveHib and compare the feedback.
you have to apply the notch filter setting below, I tried to disable and the oscillation just come back again

Center freq hz. 2.0
attenuation dB 17.5
Q Factor 1
piruloo
Posts: 14
Joined: Sat Mar 28, 2020 1:37 pm

Re: OSW Mmos to PS5

Post by piruloo »

Hello guys, can someone help me, I connect gimx through drivehub in the steering wheel port but I can't get it to work, what am I doing wrong? The firmware of drivehub beta 9 any idea thanks
Foton
Posts: 4
Joined: Wed Apr 06, 2022 12:32 am

Re: OSW Mmos to PS5

Post by Foton »

gamechanger wrote: Mon Apr 11, 2022 11:41 am
Foton wrote: Fri Apr 08, 2022 6:23 pm
GeekyDeaks wrote: Wed Apr 06, 2022 7:54 am

Can I just confirm you are using the build that ends in '.4'? The earlier builds mistakenly try to correct the FFB around the zero point of the axis, whereas .4 smooths out the FFB values instead irrespective of the angle of the wheel. I should probably remove the earlier versions from github!

https://github.com/GeekyDeaks/GIMX/rele ... 8.0-g29c.4
That's right, I'm using version .4
I have been following your developments from the very beginning. Once I got all the necessary devices, I tried the latest version.
https://i.gyazo.com/37b4268c401f6ca243f ... a25151.png

I deleted all previous profiles and downloaded Logitech G27_G29 on first launch of v.4. After that I added the line
<g29_correction min_gain="20" range_start="1000" range_end="10000"/>

And then I tested various settings for my SimCube. I still don't understand how to remove the void in the middle :(
I want to try on PS4 without DriveHib and compare the feedback.
you have to apply the notch filter setting below, I tried to disable and the oscillation just come back again

Center freq hz. 2.0
attenuation dB 17.5
Q Factor 1
I use exactly these settings.
At what step could I make a mistake? :(
I'm using the latest version of GIMX v.4. Setting up a SimCube in True Drive - GIMIX with oscillation fix.
In profile file - correction min_gain="20" range_start="1000" range_end="10000"
SajoR
Posts: 3
Joined: Thu Nov 04, 2021 5:13 am

Re: OSW Mmos to PS5

Post by SajoR »

Hello I went through this entire post and I couldn’t find how wheel disconnection was overcome (I am totally newbie on this, I just built my own gimx using the guide and applied the default firmware)
I own an old Logitech racing wheel and I want to use it on GT7 PS5
I really appreciate if you can guide me about what should I change or buy to make this work.
Regards.
Foton
Posts: 4
Joined: Wed Apr 06, 2022 12:32 am

Re: OSW Mmos to PS5

Post by Foton »

We use drivehub and hori mini. Together with GIMX.
The pages of this thread said this.
Zero7159
Posts: 22
Joined: Sat Jan 14, 2017 5:49 am

Re: OSW Mmos to PS5

Post by Zero7159 »

Foton wrote: Tue Apr 19, 2022 6:10 pm We use drivehub and hori mini. Together with GIMX.
The pages of this thread said this.
Just curious, do you have to use Drivehub? I ask because I have my PC and PS5 right next to each other and I would rather keep everything hooked up to PC. I have the GIMX software on my PC and I connect the DS4 to the PC, GIMX box has one end in PC, other end goes to PS5. I ordered the Hori Mini Gamepad so I can hopefully avoid the 8 minute disconnect issue.
as03051026
Posts: 1
Joined: Thu Feb 17, 2022 2:02 pm

Re: OSW Mmos to PS5

Post by as03051026 »

Zero7159 wrote: Sat Aug 13, 2022 11:20 pm
Foton wrote: Tue Apr 19, 2022 6:10 pm We use drivehub and hori mini. Together with GIMX.
The pages of this thread said this.
Just curious, do you have to use Drivehub? I ask because I have my PC and PS5 right next to each other and I would rather keep everything hooked up to PC. I have the GIMX software on my PC and I connect the DS4 to the PC, GIMX box has one end in PC, other end goes to PS5. I ordered the Hori Mini Gamepad so I can hopefully avoid the 8 minute disconnect issue.
As I know, you still hooked up everything to PC, then attach the GIMX to the drivehub then your PS5.
Zero7159
Posts: 22
Joined: Sat Jan 14, 2017 5:49 am

Re: OSW Mmos to PS5

Post by Zero7159 »

as03051026 wrote: Sun Aug 14, 2022 4:40 pm
Zero7159 wrote: Sat Aug 13, 2022 11:20 pm
Foton wrote: Tue Apr 19, 2022 6:10 pm We use drivehub and hori mini. Together with GIMX.
The pages of this thread said this.
Just curious, do you have to use Drivehub? I ask because I have my PC and PS5 right next to each other and I would rather keep everything hooked up to PC. I have the GIMX software on my PC and I connect the DS4 to the PC, GIMX box has one end in PC, other end goes to PS5. I ordered the Hori Mini Gamepad so I can hopefully avoid the 8 minute disconnect issue.
As I know, you still hooked up everything to PC, then attach the GIMX to the drivehub then your PS5.
Understood, thank you! I have ordered a Drivehub and Hori mini controller, both of which arrive later this week. So glad I can use my Accuforce, HE pedals, etc. with GT7, without disconnects every 8 minutes.
Post Reply