failed to read packet header from the gimx adapter

Need help? Ask here and someone will help
Post Reply
Izbt
Posts: 4
Joined: Thu Oct 14, 2021 9:50 am

failed to read packet header from the gimx adapter

Post by Izbt »

I uploaded the g29ps4 firmware, connect it to the pc and ps4, run it and give this error.
Tried different cables, firmware and swapped tx / rx
How do I fix this error?
https://ibb.co/TwV10tH
User avatar
kaiba_seto2004
Posts: 506
Joined: Sat Jul 15, 2017 9:15 am

Re: failed to read packet header from the gimx adapter

Post by kaiba_seto2004 »

Any ports than COM10? I think you selected wrong port for UART side.
PS4 enthusiast.
Izbt
Posts: 4
Joined: Thu Oct 14, 2021 9:50 am

Re: failed to read packet header from the gimx adapter

Post by Izbt »

with the problem that I figured out in the picture, and now the following is helpful:
Error: failed to open the GIMX adapter
Error: failed to send data to the GIMX adapter
com ports changing does not help, but in the gimx program it is fashionable to select only one active port
User avatar
kaiba_seto2004
Posts: 506
Joined: Sat Jul 15, 2017 9:15 am

Re: failed to read packet header from the gimx adapter

Post by kaiba_seto2004 »

Which port was showed in devices and printers?
Image
PS4 enthusiast.
Post Reply