Hi,
I try to run my SImucube through the Gimx on my computer so I can play titles like WRC and some more. After doing several tests I can not detect the wheel inside the games, in the logitech panel I get recognized, but in the game I take everything but the steering wheel, in the wrc I have even ffb, but I do not use to turn. I have the Gimx adpater bought in the store, the log I cut it because it would not let me put it whole in the Pastebin since it was very big. I have loaded the G27 firmware for PC and not for PS. I used wrc7 in this log
https://pastebin.com/BuAsn107
I hope sameone can help me please, I have read a lot and searched the forum but I have not found anything that answers me
Thanks in advance
Problem Simucube to G27 PC
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: Problem Simucube to G27 PC
Hi,
Due to your log file, you uploaded wrong firmware for your adapter (G27 PS3).
I think you should upload this firmware:
Due to your log file, you uploaded wrong firmware for your adapter (G27 PS3).
I think you should upload this firmware:
PS4 enthusiast.
Re: Problem Simucube to G27 PC
Hi,
EMUG27PC also reports "G27 PS3" to the software. I know this is confusing...
The problem here is that you somehow defined a joystick correction that just kills the wheel axis.
Try the following configuration:
EMUG27PC also reports "G27 PS3" to the software. I know this is confusing...
The problem here is that you somehow defined a joystick correction that just kills the wheel axis.
Try the following configuration:
Code: Select all
<?xml version="1.0" encoding="UTF-8"?>
<root>
<controller id="1" dpi="0" type="G27 PS3">
<configuration id="1">
<trigger type="" id="" name="" button_id="" switch_back="no" delay="0"/>
<mouse_options_list/>
<intensity_list/>
<button_map>
<button id="abs_axis_11" label="Subir marcha">
<device type="joystick" id="0" name="BU0836-LC Interface"/>
<event type="button" id="9"/>
</button>
<button id="abs_axis_13" label="Bajar marcha">
<device type="joystick" id="0" name="BU0836-LC Interface"/>
<event type="button" id="2"/>
</button>
<button id="abs_axis_19" label="Embrague">
<device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
<event type="axis down" id="2" threshold="-10"/>
</button>
<button id="abs_axis_1" label="Start">
<device type="joystick" id="0" name="BU0836-LC Interface"/>
<event type="button" id="8"/>
</button>
<button id="abs_axis_9" label="x">
<device type="joystick" id="0" name="BU0836-LC Interface"/>
<event type="button" id="6"/>
</button>
</button_map>
<axis_map>
<axis id="rel_axis_0" label="Simucube">
<device type="joystick" id="0" name="SimuCUBE"/>
<event type="axis" id="0" dead_zone="0" multiplier="0.0039" exponent="1.00" shape=""/>
</axis>
<axis id="abs_axis_17" label="Acelerador">
<device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
<event type="axis" id="0" dead_zone="0" multiplier="0.008" exponent="1.00" shape=""/>
</axis>
<axis id="abs_axis_18" label="Freno">
<device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
<event type="axis" id="1" dead_zone="0" multiplier="0.008" exponent="1.00" shape=""/>
</axis>
<axis id="abs_axis_19" label="Freno mano">
<device type="joystick" id="0" name="BU0836-LC Interface"/>
<event type="axis" id="0" dead_zone="0" multiplier="0.008" exponent="1.00" shape=""/>
</axis>
</axis_map>
<joystick_corrections_list>
<correction low_value="-32768" low_coef="0" high_value="-32768" high_coef="8191">
<device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
<event type="axis" id="0"/>
</correction>
<correction low_value="-32768" low_coef="0" high_value="-32768" high_coef="9358">
<device type="joystick" id="0" name="Heusinkveld Sim Pedals Sprint"/>
<event type="axis" id="1"/>
</correction>
<correction low_value="-32768" low_coef="0" high_value="-32768" high_coef="8191">
<device type="joystick" id="0" name="BU0836-LC Interface"/>
<event type="axis" id="0"/>
</correction>
</joystick_corrections_list>
<force_feedback>
<device type="joystick" id="0" name="SimuCUBE"/>
<inversion enable="no"/>
<gain rumble="100" constant="100" spring="100" damper="100"/>
</force_feedback>
</configuration>
</controller>
</root>
GIMX creator
Re: Problem Simucube to G27 PC
Hi very thanks for the help, but how can i try your configuration Matlo?
Forgiveness for ignorance
Forgiveness for ignorance
Re: Problem Simucube to G27 PC
In gimx-launcher, click on "File > Open config directory".
Open your configuration with a text editor like Notepad++.
Replace the whole contents, save.
Open your configuration with a text editor like Notepad++.
Replace the whole contents, save.
GIMX creator
Re: Problem Simucube to G27 PC
Thanks mate, i wanna try tomorrow, i´ll tell you
Re: Problem Simucube to G27 PC
Well its Ok ! but in wrc 4 an gravel i dont have any ffb, i´ll send you the new log with this games to see if it can be solved.
Very thanks !
Very thanks !
Re: Problem Simucube to G27 PC
Please select Messages->Debug and then check "Haptic" when generating the log file. This should help with FFB debugging.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: Problem Simucube to G27 PC
Thanks GoDlike i´ll try it