Hey everyone!
I just got my GIMX working with my HPP Pedals but sometimes I noticed that when I press the throttle all the way down it shows that it's only about 90% down in the Logitech G27 Wheel Properties.
How can I edit the config file for the gas pedal to shorten the top of the deadzone a bit? It says -32768 -32768 and 8309 high coefficient for the gas pedal. Brake pedal has the same figures but High Coefficient is 8191.
Which number do I adjust in the Joystick Corrections?
GIMX throttle sometimes low at top deadzone?
-
- Posts: 29
- Joined: Tue Oct 02, 2018 12:17 am
Re: GIMX throttle sometimes low at top deadzone?
Hi,
I moved your post to the support section.
It looks like a calibration issue. Try removing and re-adding the binding in gimx-config, and make sure to properly perform the calibration step.
I moved your post to the support section.
It looks like a calibration issue. Try removing and re-adding the binding in gimx-config, and make sure to properly perform the calibration step.
GIMX creator
-
- Posts: 29
- Joined: Tue Oct 02, 2018 12:17 am
Re: GIMX throttle sometimes low at top deadzone?
Is there a way to manually lower the number for the top deadzone to shorten it, so that it reads my gas pedal at 100% before I actually hit the end-stop on my pedal?
I'm not quite sure how to adjust it in the GIMX-Config file. I have recalibrated and in Forza Horizon 4 it's still working strangely. Sometimes it detects I have full throttle pressed down, but when I start a race sometimes I can sense that it's not reading a full throttle input, so I want to lower the top deadzone to try and make it feel 100% throttle before i even press it down all the way.
I'm not quite sure how to adjust it in the GIMX-Config file. I have recalibrated and in Forza Horizon 4 it's still working strangely. Sometimes it detects I have full throttle pressed down, but when I start a race sometimes I can sense that it's not reading a full throttle input, so I want to lower the top deadzone to try and make it feel 100% throttle before i even press it down all the way.
-
- Posts: 29
- Joined: Tue Oct 02, 2018 12:17 am
Re: GIMX throttle sometimes low at top deadzone?
Matlo,
So I figured out that it's not the calibration that's off. During a race in Forza Horizon 4, I have the pedal pressed all the way, and as the car is gaining speed in game, it stops, and then continues gaining speed. At some points the car stops gaining speed for a few seconds, and then continues again.
It's as if the connection is being interrupted every few seconds and it's not reading that the pedal is pressed all the way down.
I have the GIMX Connected into an External USB 3.0 Hub that I have been using to gain some more USB ports. Do you think this may be the problem? Does the GIMX have to be connected into the back of my PC?
Re: GIMX throttle sometimes low at top deadzone?
Please post a log file as requested in forum rules: viewtopic.php?f=5&t=691
And trigger the issue while generating the log file.
And trigger the issue while generating the log file.
GIMX creator
-
- Posts: 29
- Joined: Tue Oct 02, 2018 12:17 am
Re: GIMX throttle sometimes low at top deadzone?
Matlo, how do I make a log file?Matlo wrote: ↑Fri Oct 12, 2018 5:52 am Please post a log file as requested in forum rules: viewtopic.php?f=5&t=691
And trigger the issue while generating the log file.
Re: GIMX throttle sometimes low at top deadzone?
Point 3 in forum rules linked in my previous post.
GIMX creator
-
- Posts: 29
- Joined: Tue Oct 02, 2018 12:17 am
Re: GIMX throttle sometimes low at top deadzone?
When I set the GIMX- Launcher to start with Messages: Log File, I get an error. It wont start GIMX at all. The DOS window Says:Matlo wrote: ↑Fri Oct 12, 2018 5:52 am Please post a log file as requested in forum rules: viewtopic.php?f=5&t=691
And trigger the issue while generating the log file.
src/windows/gprio.c:26 gprio: failed to set priority class
And the log file says: https://pastebin.com/FawNJFES
-
- Posts: 29
- Joined: Tue Oct 02, 2018 12:17 am
Re: GIMX throttle sometimes low at top deadzone?
Matlo, In fact, I never paid attention but that top line is always there when I start GIMX. The DOS Prompt says the following when I start GIMX normally:Matlo wrote: ↑Fri Oct 12, 2018 5:52 am Please post a log file as requested in forum rules: viewtopic.php?f=5&t=691
And trigger the issue while generating the log file.
src/windows/gprio.c:26 gprio: failed to set priority class
global option -c with value `Accuforce and HPP.xml'
controller #1: option -p with value `COM9'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
auto-grab flag is set
GIMX adapter detected, controller type is: G27 PS3.
no pass-through device is needed
Start the game with a dualshock 3, and then reassign game controllers.
using default refresh period: 10.00ms
Warning: macros are not available for: joystick SimXperience AccuForce (0)
Haptic core has source haptic_source_lg for device 046d:c29b
Haptic core has sink haptic_sink_os for joystick 2 (SimXperience AccuForce)
Timer resolution: min=156250 max=5000 current=4960
rounding timer period to 9920
Re: GIMX throttle sometimes low at top deadzone?
You missed to reproduce the issue while generating the log file.
(and please use the reply button instead of quoting the last post)
(and please use the reply button instead of quoting the last post)
GIMX creator