Help with connecting GIMX via the STM32 card to the PS4

Need help? Ask here and someone will help
Post Reply
Igor
Posts: 4
Joined: Wed Apr 28, 2021 9:25 am

Help with connecting GIMX via the STM32 card to the PS4

Post by Igor »

Good time of day. Please tell me how to properly connect the GEMIX adapter to the PS4. I have a steering wheel based on STM32 and pedals based on ARDUINO LEONARDO. What firmware do I need to download and what settings do I need to make? Thank you in advance.
User avatar
kaiba_seto2004
Posts: 485
Joined: Sat Jul 15, 2017 9:15 am

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by kaiba_seto2004 »

You need to update firmware "G29PS4" for your gimx adapter.
About config, you need to configure yourself due to specific setup you got. It is so easy to bind button one by one ;)
PS4 enthusiast.
Igor
Posts: 4
Joined: Wed Apr 28, 2021 9:25 am

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by Igor »

kaiba_seto2004 wrote:
Wed Apr 28, 2021 10:14 am
You need to update firmware "G29PS4" for your gimx adapter.
About config, you need to configure yourself due to specific setup you got. It is so easy to bind button one by one ;)
I updated to this version of the firmware as well. He writes that he does not see the steering wheel of the G29. Maybe you need to install the driver for G29 on your PC?
User avatar
kaiba_seto2004
Posts: 485
Joined: Sat Jul 15, 2017 9:15 am

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by kaiba_seto2004 »

Of course you need to install G29 driving software too - Logitech Ghub for now.
PS4 enthusiast.
Igor
Posts: 4
Joined: Wed Apr 28, 2021 9:25 am

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by Igor »

kaiba_seto2004 wrote:
Thu Apr 29, 2021 1:22 am
Of course you need to install G29 driving software too - Logitech Ghub for now.
I didn't do that) This is not found in any guide. Thanks for the tip.
Igor
Posts: 4
Joined: Wed Apr 28, 2021 9:25 am

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by Igor »

kaiba_seto2004 wrote:
Thu Apr 29, 2021 1:22 am
Of course you need to install G29 driving software too - Logitech Ghub for now.
I flashed the arduino on "G29PS4", installed Ghub, but there are no devices in it. When connecting, dmx writes an error that the G29 usb was not found. What could be the problem?
User avatar
kaiba_seto2004
Posts: 485
Joined: Sat Jul 15, 2017 9:15 am

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by kaiba_seto2004 »

After flashing firmware, you need to create a new config due to your setup. Choose type is G29 and mapping button for all buttons you got.
Like this
Image
PS4 enthusiast.
User avatar
Matlo
Posts: 5760
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Help with connecting GIMX via the STM32 card to the PS4

Post by Matlo »

The guide for your use case is there: https://gimx.fr/wiki/index.php?title=Gu ... eringWheel

As kaiba_seto2004 said, you have to create a new config since your hardware is specific. Open gimx-config, define all button mappings in the Button tab, all axis mappings (wheel, pedals) in the Axis tab, and save your config. Select this config in gimx-launcher.
GIMX creator Donate Shop
Post Reply