DietPi || unable to edit configuration file

Need help? Ask here and someone will help
Post Reply
demonkazuya
Posts: 6
Joined: Thu Jul 09, 2020 4:22 am

DietPi || unable to edit configuration file

Post by demonkazuya »

hi i am having issues with launching the game launcher as it gives me this error:

Code: Select all

Raspbian GNU/Linux 10 (buster)
Linux 4.19.118-v7+ #1311 SMP Mon Apr 27 14:21:24 BST 2020 unknown
Bus 001 Device 010: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID)
Bus 001 Device 011: ID 054c:09cc Sony Corp. DualShock 4 [CUH-ZCT2x]
Bus 001 Device 009: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 001 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UART Bridge Controller [CP210x family]
Bus 001 Device 008: ID 0424:7800 Standard Microsystems Corp. 
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/3p, 480M
            |__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
            |__ Port 3: Dev 9, If 0, Class=Human Interface Device, Driver=, 12M
            |__ Port 1: Dev 8, If 0, Class=Vendor Specific Class, Driver=lan78xx, 480M
        |__ Port 2: Dev 11, If 0, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 2: Dev 11, If 3, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 11, If 1, Class=Audio, Driver=, 12M
        |__ Port 2: Dev 11, If 2, Class=Audio, Driver=, 12M
        |__ Port 3: Dev 10, If 0, Class=Communications, Driver=cdc_acm, 12M
        |__ Port 3: Dev 10, If 1, Class=CDC Data, Driver=cdc_acm, 12M
        |__ Port 3: Dev 10, If 2, Class=Human Interface Device, Driver=usbhid, 12M
global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
auto-grab flag is set
GIMX 8.0 ARMv6
GIMX adapter detected, controller type is: G29 PS4.
Firmware version: 5.8
Reset sent to the GIMX adapter.
found pass-through device 0x054c:0x09cc
registered joystick 0 with name "Sony Computer Entertainment Wireless Controller"
using default refresh period: 5.00ms
/root/.gimx/config/LogitechG27_G29.xml:1: parser error : Start tag expected, '<' not found
500: Internal Server Error
^
[01;31mError: [0mcould not parse file /root/.gimx/config/LogitechG27_G29.xml: Invalid argument
[01;31mError: [0mread_file failed
native mode is already enabled for HID device 01:01:01:03:00:00 (PID=c29b)
joystick 0 has name 'Sony Computer Entertainment Wireless Controller' and virtual id 0
joystick 1 has name 'G27 Racing Wheel' and virtual id 0
joystick 2 has name 'Arduino LLC Arduino Leonardo' and virtual id 0
Dump of /root/.gimx/config/LogitechG27_G29.xml:
500: Internal Server Error
tried to re download the config but same issue. I also get an error when opening the gimx-config "it is not recommended to run as root user"

User avatar
LoneWolf81
Posts: 144
Joined: Sat Jun 15, 2019 11:49 am
Location: South Africa

Re: DietPi || unable to edit configuration file

Post by LoneWolf81 »

Hi

You need to update the firmware on your adapter to 8.0 currently its on 5.8 please update and post the result back here when you try to run it again.
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX :D .

demonkazuya
Posts: 6
Joined: Thu Jul 09, 2020 4:22 am

Re: DietPi || unable to edit configuration file

Post by demonkazuya »

seems to be working now after updating the firmware. Didn't know that there was a new firmware as the same DIY cable is working on windows. Thanks!

User avatar
LoneWolf81
Posts: 144
Joined: Sat Jun 15, 2019 11:49 am
Location: South Africa

Re: DietPi || unable to edit configuration file

Post by LoneWolf81 »

No problem glad its working

When GIMX 8 was released it came with updated firmware
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX :D .

Post Reply