Programmer not responding

Need help? Ask here and someone will help
Post Reply
Treskimo
Posts: 3
Joined: Wed Jan 01, 2020 9:30 pm

Programmer not responding

Post by Treskimo »

On Windows 10
Trying to emulate Logitech g27 or g29 on PC
Bought the GIMX adapter from GIMX.

I understand default firmware is for PS4 so trying to update firmware to g27pc.

Once the command prompt loads, I keep getting the '...programmer not responding...' error

I've attempted multiple times. Both sides are connected to PC.

Is there any other drivers or anything I need to install?

User avatar
Matlo
Posts: 5680
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Programmer not responding

Post by Matlo »

Which side of the adapter are you unplugging/replugging from/to PC USB port? It must be the USB cable side.
GIMX creator Donate Shop

Treskimo
Posts: 3
Joined: Wed Jan 01, 2020 9:30 pm

Re: Programmer not responding

Post by Treskimo »

I've tried both. Will try again in a sec. Here's console output:

Image
https://drive.google.com/open?id=1-hG5x ... ZmeW-hTj1V

Treskimo
Posts: 3
Joined: Wed Jan 01, 2020 9:30 pm

Re: Programmer not responding

Post by Treskimo »

Oh wow it worked that time. Thanks!

Just to be clear for anyone in future (as someone else threw me off by saying it must be the adapter side)..

It is 100% the cable, NOT the adapter that should be re-plugged.

Post Reply