A few months ago I purchased a GIMX adapter from eBay and I have been having trouble getting it working I was wondering if any one had any advice on what the problem is.When I press start it displays the error message "Failed to read packet header from gimx adapter" also i don't know if this has anything to do with this but i can't change the firmware from Xbox 360 to Xbox One.
The two boards are:
https://www.ebay.de/itm/5102-module-USB ... SwWflaMsO4
https://www.pjrc.com/teensy/-->Mine is the 2.0 version
Blue wire:GND-->GND
Yellow wire:TXD-->D2
Black wire:RXD-->D3
My Xbox live name is monkeyboy2409,
Thanks
"Failed to read packet header from gimx adapter"
-
- Posts: 3
- Joined: Sat Sep 07, 2019 12:28 pm
Re: "Failed to read packet header from gimx adapter"
Please post a clear picture of the wiring
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
-
- Posts: 3
- Joined: Sat Sep 07, 2019 12:28 pm
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: "Failed to read packet header from gimx adapter"
Please solder your connection wires, don't just tighten it.
PS4 enthusiast.
-
- Posts: 3
- Joined: Sat Sep 07, 2019 12:28 pm
Re: "Failed to read packet header from gimx adapter"
This still hasn’t solved the issue
Re: "Failed to read packet header from gimx adapter"
Double-check the soldering. If you have a multi-meter, check connection from chip to chip. Also check the micro USB cable, it could be defective.
GIMX creator