Search found 231 matches
- Mon Jun 06, 2022 2:51 pm
- Forum: Support
- Topic: Updating Gimx on rpi
- Replies: 7
- Views: 6553
Re: Updating Gimx on rpi
Hi sorry for the delay I tested it myself to see if I can help you this is the version I installed, I used Raspberry pi imager and selected Raspberry Pi OS legacy version 32 bit Hard to run the two commands to force it to install and install dependencies sudo dpkg --force-overwrite -i gimx_8.0-1_arm...
- Sun Jun 05, 2022 8:02 am
- Forum: Support
- Topic: Updating Gimx on rpi
- Replies: 7
- Views: 6553
Re: Updating Gimx on rpi
Thats actually quite strange what Raspberry pi are you using and are you on the latest version of the OS ? I know on the Pi4 they normally had issues with the installer trying to override `/usr/bin/bdaddr This was resolved by forcing an overwrite sudo dpkg --force-overwrite -i gimx_8.0-1_armhf.deb s...
- Sat Jun 04, 2022 9:19 am
- Forum: Support
- Topic: Updating Gimx on rpi
- Replies: 7
- Views: 6553
- Fri Mar 11, 2022 4:10 pm
- Forum: Support
- Topic: Building gimx, don't understand the tutorials
- Replies: 14
- Views: 8513
Re: Building gimx, don't understand the tutorials
Hi
Its TX to RX and RX to TX
And make sure your console is powered on before you click start
Its TX to RX and RX to TX
And make sure your console is powered on before you click start
- Fri Mar 11, 2022 5:35 am
- Forum: Support
- Topic: fail to read packet header from the gimx adapter
- Replies: 15
- Views: 23101
Re: fail to read packet header from the gimx adapter
Ok In the launcher there is an option under the selected config named messages set that to log file and click start it will show a blank box after it exits you will have the log file in notepad as it will auto open. https://drive.google.com/file/d/1kGtEMXmwmm5lQxOGD9DM2IKBib_D973Y/view?usp=sharing h...
- Sun Mar 06, 2022 6:10 am
- Forum: Support
- Topic: fail to read packet header from the gimx adapter
- Replies: 15
- Views: 23101
Re: fail to read packet header from the gimx adapter
Set the messages option to log file click on start when you exit you will get a notepad popup with log file Only time I have seen the failed to packet was when I had a faulty cable from adapter to console so just double check it and make sure console is turned on as it will also generate this error ...
- Thu Mar 03, 2022 5:10 am
- Forum: Support
- Topic: fail to read packet header from the gimx adapter
- Replies: 15
- Views: 23101
Re: fail to read packet header from the gimx adapter
Hi Please generate a log file and add it here Also can you check if the com port is correct for the adapter and the target console is turned on before you start Check your usb cables if you are using any usb hubs try to run it without one just to test You can also double check the wiring to make sur...
- Wed Mar 17, 2021 6:37 am
- Forum: GIMX Discussion
- Topic: Ps4 games on Ps5
- Replies: 8
- Views: 16138
Re: Ps4 games on Ps5
Hi
From my experience it does work I have been playing Division 2 on the PS5 with my adapter since I got it. I only play shooters so I am unsure about driving games. But even the outriders PS4 Demo works with GIMX as long as its the PS4 version.
From my experience it does work I have been playing Division 2 on the PS5 with my adapter since I got it. I only play shooters so I am unsure about driving games. But even the outriders PS4 Demo works with GIMX as long as its the PS4 version.
Re: DIY Fail!
Just want to confirm the firmware loading method you are using, are you doing it from the help menu and choosing update firmware or are you using another method.
Re: DIY Fail!
Try installing this driver for the CP2102
https://www.silabs.com/documents/public ... Driver.zip
If that fails to work I would suggest you try a live linux distro to test then we can isolate if its a windows issue or the maybe the serial board is faulty
https://www.silabs.com/documents/public ... Driver.zip
If that fails to work I would suggest you try a live linux distro to test then we can isolate if its a windows issue or the maybe the serial board is faulty