Doubts with GIMX

[jabidin]

Hello, I have this Wheel, DFP:

I bought the web adapter:
https://blog.gimx.fr/product/gimx-adapter/

Questions::
This tutorial is correct? "spanish"
https://www.youtube.com/watch?v=lxcuPRUaScw

Does the adapter comes without the firmware (EMUDFPPS2 - in my case)?

Tks

[GoDlike]

Adapter comes with different firmware, you need to reflash. Don't use youtube tutorials, they're outdated. We have good guide on wiki here - https://gimx.fr/wiki/index.php?title=Main_Page

[Matlo]

No need to change firmware if your target is the PS4.

[jabidin]

tks , yes is for PS4, but……

https://blog.gimx.fr/product/gimx-adapter/
Important note
The GIMX shop only sells hardware. It is your duty to check that this product will fit your needs. In case of doubt, please consider posting questions before placing any order, in the discussion section of the GIMX forum.

[Matlo]

If you still have questions, feel free to ask.

[jabidin]

It says here that if necessary load the firmware::
https://blog.gimx.fr/product/gimx-adapter/
Important note
The GIMX shop only sells hardware. It is your duty to check that this product will fit your needs. In case of doubt, please consider posting questions before placing any order, in the discussion section of the GIMX forum.

[GoDlike]

Adapter comes with PS4 firmware, if you want to load other firmware however it's very easy. Just some buttons and flasher is built in gimx.

[jabidin]

Adapter comes with PS4 firmware, if you want to load other firmware however it's very easy. Just some buttons and flasher is built in gimx.

Tkank my friend

[jabidin]

I got the GMIX adapter, but problems not detected Driving Force Pro, in Raspberry Pi
This picture is not:


This picture Yes with errors:

[GoDlike]

Well im not a linux expert but when I see "insufficient permissions" error I would try to run GIMX with sudo.

Also keep in mind that rPI support is experimental.