Is Logitech extreme 3d pro setup possible with GIMX?

Need help? Ask here and someone will help
Post Reply
xbbb
Posts: 4
Joined: Fri Nov 27, 2015 5:44 pm

Is Logitech extreme 3d pro setup possible with GIMX?

Post by xbbb »

Could you guys tell me whether such a setup would work with GIMX:

Joystick (http://gaming.logitech.com/en-us/produc ... o-joystick) =>GIMX on Raspberry Pi 2 B (or any other platform) =>Teensy 2.0 via BlueTooth or USB => PS4 ?

The objective is to use the joystick for jet flying in Battlefield4 on PS4.

Can I use a Sparkfun pro micro instead of Teensy 2.0 without any special handling?

I've got a XIM4 if it matters somehow.

Thanks in advance.
User avatar
Matlo
Posts: 5764
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Is Logitech extreme 3d pro setup possible with GIMX?

Post by Matlo »

It should work.

It's possible to use a pro micro, but you'll have to solder pins or wires.
GIMX creator
xbbb
Posts: 4
Joined: Fri Nov 27, 2015 5:44 pm

Re: Is Logitech extreme 3d pro setup possible with GIMX?

Post by xbbb »

Thank you for feedback.
Post Reply