Template:InstallationNext

Before Installation

Windows

Disable power saving for USB devices

This is required to prevent Windows from turning off the controller or the USB to UART adapter.

• Open the Device Manager.
• Right click on the USB HUB (make sure to select the right one) > Properties > Power management > Uncheck "Allow the computer to turn off this device to save power".
• Right click on the COM port > Properties > Power management > Uncheck "Allow the computer to turn off this device to save power".

System Preparation

• Install all Windows updates (otherwise USBDK may fail to work properly, resulting in GIMX failures)
• Create a system restore point, in case something goes wrong (USBDK was known to create instability on some systems)

Ubuntu Linux

Add "universe" to your software sources

• Start Ubuntu Software Center.

• Click Edit>Software Sources.

• Select "Community-maintained Open Source software (universe)", and close.

Refresh software sources

If you are running from a Live CD or a Live USB, you have to manually refresh software sources:

• Click on the Ubuntu desk.

• In the search area, type "terminal" with no quotes, and hit enter.

• In the terminal, type "sudo apt-get update" with no quotes, and hit enter.

GIMX Installation

Windows

Now, as you did previous steps you can proceed to installation of the GIMX software itself. Depending on architecture of your system choose correct package.

• 32-bit setup, for 32-bit Windows only
• 64-bit setup, for 64-bit Windows only

And install GIMX software.

Ubuntu Linux

Depending on architecture of your system choose correct package.

• Downloard the .deb file: 32bits or 64bits
• Install it (double click, then install).