It's possible to configure keyboard/mouse/joystick macros: a key or button press can trigger a series of keyboard/mouse/joystick events, with timing conditions.
Macros have to be defined in files saved into:
- Ubuntu: the ~/.emuclient/macros directory. ~ is the home directory, and .emuclient folder is hidden (in the file manager, press ctrl+h to display hidden folders).
- Windows: the C:\Users\<username>\AppData\Roaming\emuclient\macros directory.
GIMX 0.51 and older:
- Windows 32bits: the C:\Program Files\GIMX\macros directory.
- Windows 64bits: the C:\Program Files (x86)\GIMX\macros directory.
MACRO <DEVICE EVENT> <ID> <DEVICE EVENT> <ID> <VALUE> DELAY <MS> #<COMMENT>
<DEVICE EVENT>: KEY, KEYDOWN, KEYUP, MBUTTON, MBUTTONDOWN, MBUTTONUP, JBUTTON, JBUTTONDOWN, JBUTTONUP, MAXIS, JAXIS <ID>: the event id (case sensitive) as displayed in gimx-config <VALUE>: the axis value (only for MAXIS and JAXIS) <MS>: integer value in milliseconds <COMMENT>: a comment, not interpreted
- KEYDOWN: keyboard key pressed
- KEYUP: keyboard key released
- KEY: KEYDOWN + DELAY 50 + KEYUP
- MBUTTONDOWN: mouse button pressed
- MBUTTONUP: mouse button released
- MBUTTON: MBUTTONDOWN + DELAY 50 + MBUTTONUP
- JBUTTONDOWN: joystick button pressed
- JBUTTONUP: joystick button released
- JBUTTON: JBUTTONDOWN + DELAY 50 + JBUTTONUP
- DELAY: delay in milliseconds
- MAXIS: mouse axis moved
ID: 0 for x axis, and 1 for y axis
VALUE: positive values for right and down
- JAXIS: joystick axis moved
ID: as in gimx-config
VALUE: in [-32768 .. 32767]
MACRO MBUTTONDOWN BUTTON_LEFT KEYDOWN p DELAY 50 KEYUP p DELAY 50 MBUTTONDOWN BUTTON_LEFT MACRO MBUTTONUP BUTTON_LEFT KEYUP p MBUTTONDOWN BUTTON_LEFT
'p' is bind to r1 in both hip fire and ADS profiles.
'BUTTON_LEFT' is NOT bind to r1 in both hip fire and ADS profiles.
MACRO KEYDOWN p MAXIS 1 25 KEYDOWN p MACRO MBUTTONDOWN BUTTON_LEFT KEYDOWN p MACRO MBUTTONUP BUTTON_LEFT KEYDOWN p
This section is only applicable since GIMX 1.00.
It is possible to specify the macro files to be read for each configuration file.
This can be configured in a file named "configs.txt", located in the macros directory.
#If config1.xml is loaded, macro1.txt is read. config1.xml macro1.txt #If config1.xml is loaded, macro2.txt is read. config1.xml macro2.txt #If config2.xml is loaded, macro2.txt is read. config2.xml macro2.txt
Lines beginning with a # are not interpreted.
It is also possible to define activation triggers within the macro definition.
The syntax is:
MACRO F1 #content MACRO F2 TRIGGER F5 #content MACRO F3 TRIGGER F6 #content MACRO F4 TRIGGER F5 #content
F1 remains active all the time as there is no trigger specified. F2 and F4 are default active. If F6 is pressed, F3 becomes active, F2 and F4 become inactive.
The delay precision depends on the controller update period:
- sixaxis/bluetooth = 11.25ms
- sixaxis/usb = 10ms
- 360 pad = 8ms
If you specify a delay that is not a multiple of the precision, the resulting delay will be the lowest multiple of the precision higher than the specified delay.
For example, if the precision is 11.25ms and the delay is 12ms, the resulting delay will be 22.50ms (=2*11.25ms).
To make a macro loop, just add a KEYDOWN or MBUTTONDOWN or JBUTTONDOWN command at the end of the macro definition.
MACRO MBUTTONDOWN BUTTON_LEFT KEYDOWN p DELAY 50 KEYUP p DELAY 50 MBUTTONDOWN BUTTON_LEFT
The macro is triggered by pressing 'BUTTON_LEFT'.
The last command of the macro restarts the macro, creating a loop.
To stop a macro loop, just press the trigger again. The macro is stopped immediately, and the state of the controller is unchanged.
In case multiple keyboards or mice or joysticks are used, it's not possible to specify the device for which events are generated.
Events are generated for the first keyboard/mouse/joystick found in the configuration.