CHIP
Power Limitations
C.H.I.P. is limited to 900mA by default thus connecting an USB HUB or any other Periphal that requires more than that will make the device to abruptly turn off.
At the time of this writing, version 4.4 No-limit won't be enough. You'll have to make changes in the system to remove this limitation.
Please refer to: Abrupt Shutdowns for more information.
Modifying C.H.I.P. Power Limitations
The following steps and script is Copyrighted by Steven Ford http://geeky-boy.com/ and licensed "public domain style under CC0.
If you are having power problems, you should first log into CHIP with all peripherals disconnected. These instructions assume you are in a shell prompt on CHIP.
Step 1. Get the shell script file onto CHIP:
sudo wget -O /etc/init.d/axp209-nolim http://fordsfords.github.io/axp209-nolim/axp209-nolim
sudo chmod +x /etc/init.d/axp209-nolim
sudo update-rc.d axp209-nolim defaults
Step 2. Now, do a graceful restart:
sudo shutdown -r now
For more information refer to: https://github.com/fordsfords/axp209-nolim
GIMX on CHIP (tags: Next Thing Co. C.H.I.P.)
This guide will assume you've already configured your CHIP's WiFi connection (by using the command: nmtui) and know it's IP address to be able to connect to it.
Step 1. Download and Istall GIMX
wget https://gimx.fr/download/gimx-raspbian -O gimx.deb
sudo dpkg -i gimx.deb
sudo apt-get -f install
Step 2. Stop & Disable Console TTY (make sure u are connected through SSH)
sudo systemctl mask serial-getty@ttyS0.service
sudo systemctl stop serial-getty@ttyS0.service
Step 3. Create GIMX directories
mkdir ~/.gimx; mkdir ~/.gimx/macros; mkdir ~/.gimx/config
Step 4. Download and move the Configurations
wget https://github.com/matlo/GIMX-configurations/archive/master.zip
unzip master.zip
mv GIMX-configurations-master/Linux/* ~/.gimx/config
Step 5. Delete the file master.zip and the directory GIMX-configurations-master
rm master.zip
rm -rf GIMX-configurations-master
You are now ready to start using GIMX.
NOTE: Keep in mind that the serial interface is /dev/ttyS0