Difference between revisions of "Translations:Command line/34/fr"

From GIMX
Jump to: navigation, search
(Created page with "$ sudo ./gimx-ps4-setup.sh Unplug any Dualshock 4. Unplug any teensy. Unpug the bluetooth dongle. Then press enter. Plug the bluetooth dongle. The bluetooth don...")
 

(No difference)

Latest revision as of 10:55, 3 September 2014

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Command line)
$ sudo ./gimx-ps4-setup.sh
  Unplug any Dualshock 4.
  Unplug any teensy.
  Unpug the bluetooth dongle.
  Then press enter.
  
  Plug the bluetooth dongle.
  The bluetooth dongle address is XX:XX:XX:XX:XX:XX.
  The bluetooth hci number is 1.
  Plug the DS4 with a USB cable.
  The DS4 address is YY:YY:YY:YY:YY:YY.
  Unplug the DS4.
  Plug the teensy.
  Unplug the teensy.
  Plug the teensy to the PS4, and wait a few seconds.
  Then plug the teensy back to the PC.
  The PS4 address is ZZ:ZZ:ZZ:ZZ:ZZ:ZZ.
  Everything was successful: setting dongle link keys.
  To run gimx, type:
  gimx -t DS4 -c config.xml -h 1 -b ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
Translation$ sudo ./gimx-ps4-setup.sh
  Unplug any Dualshock 4.
  Unplug any teensy.
  Unpug the bluetooth dongle.
  Then press enter.
  
  Plug the bluetooth dongle.
  The bluetooth dongle address is XX:XX:XX:XX:XX:XX.
  The bluetooth hci number is 1.
  Plug the DS4 with a USB cable.
  The DS4 address is YY:YY:YY:YY:YY:YY.
  Unplug the DS4.
  Plug the teensy.
  Unplug the teensy.
  Plug the teensy to the PS4, and wait a few seconds.
  Then plug the teensy back to the PC.
  The PS4 address is ZZ:ZZ:ZZ:ZZ:ZZ:ZZ.
  Everything was successful: setting dongle link keys.
  To run gimx, type:
  gimx -t DS4 -c config.xml -h 1 -b ZZ:ZZ:ZZ:ZZ:ZZ:ZZ

$ sudo ./gimx-ps4-setup.sh 

 Unplug any Dualshock 4.
 Unplug any teensy.
 Unpug the bluetooth dongle.
 Then press enter.
 
 Plug the bluetooth dongle.
 The bluetooth dongle address is XX:XX:XX:XX:XX:XX.
 The bluetooth hci number is 1.
 Plug the DS4 with a USB cable.
 The DS4 address is YY:YY:YY:YY:YY:YY.
 Unplug the DS4.
 Plug the teensy.
 Unplug the teensy.
 Plug the teensy to the PS4, and wait a few seconds.
 Then plug the teensy back to the PC.
 The PS4 address is ZZ:ZZ:ZZ:ZZ:ZZ:ZZ.
 Everything was successful: setting dongle link keys.
 To run gimx, type:
 gimx -t DS4 -c config.xml -h 1 -b ZZ:ZZ:ZZ:ZZ:ZZ:ZZ

Retrieved from "https://gimx.fr/wiki/index.php?title=Translations:Command_line/34/fr&oldid=3486"