Bbb sniffer - Revision history

Matlo: /* SD card setup */

2015-01-14T14:13:29Z

‎SD card setup

Matlo: /* SD card setup */

2015-01-14T14:12:45Z

‎SD card setup

Matlo: /* On the BBB */

2015-01-14T13:58:22Z

‎On the BBB

Matlo: /* On a Linux desktop */

2015-01-14T13:56:56Z

‎On a Linux desktop

Matlo at 13:55, 14 January 2015

2015-01-14T13:55:55Z

Matlo: /* On a Linux desktop */

2014-12-28T23:18:37Z

‎On a Linux desktop

Matlo: /* On the BBB */

2014-12-28T23:18:22Z

‎On the BBB

Matlo: /* On a Linux desktop */

2014-12-28T23:17:59Z

‎On a Linux desktop

Matlo: /* On a Linux desktop */

2014-12-28T23:17:31Z

‎On a Linux desktop

Matlo: Created page with "=On a Linux desktop= mkdir ~/bbb cd ~/bbb wget http://debian.beagleboard.org/images/bone-debian-7.5-2014-05-14-2gb.img.xz md5sum bone-debian-7.5-2014-05-14-2gb.img.xz (resul..."

2014-12-28T23:16:31Z

Created page with "=On a Linux desktop= mkdir ~/bbb cd ~/bbb wget http://debian.beagleboard.org/images/bone-debian-7.5-2014-05-14-2gb.img.xz md5sum bone-debian-7.5-2014-05-14-2gb.img.xz (resul..."

New page

=On a Linux desktop=

mkdir ~/bbb
cd ~/bbb

wget http://debian.beagleboard.org/images/bone-debian-7.5-2014-05-14-2gb.img.xz
md5sum bone-debian-7.5-2014-05-14-2gb.img.xz
(result should be 35877ce21e8ed0eb1bdc6819ad71c317)
xz --stdout -d bone-debian-7.5-2014-05-14-2gb.img.xz | sudo dd of=/dev/sdX bs=4096
sync

Remove the sdcard.

wget https://github.com/RobertCNelson/linux-dev/archive/3.8.13-bone50.tar.gz
tar xzvf 3.8.13-bone50.tar.gz
cd linux-dev-3.8.13-bone50/

If needed, modify tools/host_det.sh so that it detects your Linux distribution.

./build_kernel.sh

This script will eventually tell you to run commands to install missing packages, e.g.:
sudo apt-get update
sudo apt-get install device-tree-compiler lzma

./build_kernel.sh

Patch and rebuild USB gadget modules:

cd KERNEL/drivers/usb/gadget/
wget https://raw.githubusercontent.com/dominicgs/USBProxy/master/doc/inode.c.patch
patch < inode.c.patch
cd ~/bbb/linux-dev-3.8.13-bone50
./tools/rebuild.sh

Insert and mount the sdcard (e.g. to /mnt/rootfs).

cp ~/bbb/linux-dev-3.8.13-bone50/KERNEL/drivers/usb/gadget/*.ko /mnt/rootfs/lib/modules/3.8.13-bone50/kernel/drivers/usb/gadget/

Modify the /mnt/rootfs/opt/scripts/boot/am335x_evm.sh file so that the usb0 related lines are commented out.

Unmount the sdcard, plug it in the BBB, and power it on.

=On the BBB=

depmod -a

sudo apt-get install libudev-dev

mkdir sniffer
cd sniffer
wget https://github.com/libusb/libusb/archive/v1.0.19.tar.gz
tar xzvf v1.0.19.tar.gz
cd libusb-1.0.19/
./bootstrap.sh
./configure
make
make install

mv /etc/ld.so.conf.d/libc.conf /etc/ld.so.conf.d/aa_libc.conf
ldconfig

And install/run USBProxy as explained in the README.md.

@@ Line 19: / Line 19: @@
   xz --stdout -d bone-debian-7.5-2014-05-14-2gb.img.xz | sudo dd of=/dev/sdX bs=4096
   sync
-Where /dev/sdX is the sdcard device. Don't try anything if you don't know what 'X' should be.
+Where /dev/sdX is the sdcard device. Don't try anything if you don't know what 'X' should be (you could wipe your hard drive).
 Remove the sdcard.

@@ Line 7: / Line 7: @@
 * a micro SD card
-=On a Linux desktop=
+=SD card setup=
   mkdir ~/bbb

@@ Line 52: / Line 52: @@
 Unmount the sdcard, plug it in the BBB, and power it on.
-=On the BBB=
+=USBProxy installation=
   depmod -a

@@ Line 1: / Line 1: @@
 =On a Linux desktop=
@@ Line 46: / Line 54: @@
   depmod -a
-  sudo apt-get install libudev-dev
+  apt-get install libudev-dev
   mkdir sniffer
@@ Line 61: / Line 69: @@
   ldconfig
-And install/run USBProxy as explained in the README.md.
+Install USBProxy as explained in the [https://github.com/dominicgs/USBProxy/blob/master/README.md README].

@@ Line 44: / Line 44: @@
 =On the BBB=
-depmod -a
+ depmod -a
-sudo apt-get install libudev-dev
+ sudo apt-get install libudev-dev
-mkdir sniffer
+ mkdir sniffer
-cd sniffer
+ cd sniffer
-wget https://github.com/libusb/libusb/archive/v1.0.19.tar.gz
+ wget <nowiki>https://github.com/libusb/libusb/archive/v1.0.19.tar.gz</nowiki>
-tar xzvf v1.0.19.tar.gz
+ tar xzvf v1.0.19.tar.gz
-cd libusb-1.0.19/
+ cd libusb-1.0.19/
-./bootstrap.sh
+ ./bootstrap.sh
-./configure
+ ./configure
-make
+ make
-make install
+ make install
-mv /etc/ld.so.conf.d/libc.conf /etc/ld.so.conf.d/aa_libc.conf
+ mv /etc/ld.so.conf.d/libc.conf /etc/ld.so.conf.d/aa_libc.conf
-ldconfig
+ ldconfig
 And install/run USBProxy as explained in the README.md.

@@ Line 12: / Line 12: @@
 Remove the sdcard.
-wget <nowiki>https://github.com/RobertCNelson/linux-dev/archive/3.8.13-bone50.tar.gz</nowiki>
+ wget <nowiki>https://github.com/RobertCNelson/linux-dev/archive/3.8.13-bone50.tar.gz</nowiki>
-tar xzvf 3.8.13-bone50.tar.gz
+ tar xzvf 3.8.13-bone50.tar.gz
-cd linux-dev-3.8.13-bone50/
+ cd linux-dev-3.8.13-bone50/
 If needed, modify tools/host_det.sh so that it detects your Linux distribution.
-./build_kernel.sh
+ ./build_kernel.sh
 This script will eventually tell you to run commands to install missing packages, e.g.:
-sudo apt-get update
+ sudo apt-get update
-sudo apt-get install device-tree-compiler lzma
+ sudo apt-get install device-tree-compiler lzma
-./build_kernel.sh
+ ./build_kernel.sh
 Patch and rebuild USB gadget modules:
-cd KERNEL/drivers/usb/gadget/
+ cd KERNEL/drivers/usb/gadget/
-wget <nowiki>https://raw.githubusercontent.com/dominicgs/USBProxy/master/doc/inode.c.patch</nowiki>
+ wget <nowiki>https://raw.githubusercontent.com/dominicgs/USBProxy/master/doc/inode.c.patch</nowiki>
-patch < inode.c.patch
+ patch < inode.c.patch
-cd ~/bbb/linux-dev-3.8.13-bone50
+ cd ~/bbb/linux-dev-3.8.13-bone50
-./tools/rebuild.sh
+ ./tools/rebuild.sh
 Insert and mount the sdcard (e.g. to /mnt/rootfs).
-cp ~/bbb/linux-dev-3.8.13-bone50/KERNEL/drivers/usb/gadget/*.ko /mnt/rootfs/lib/modules/3.8.13-bone50/kernel/drivers/usb/gadget/
+ cp ~/bbb/linux-dev-3.8.13-bone50/KERNEL/drivers/usb/gadget/*.ko /mnt/rootfs/lib/modules/3.8.13-bone50/kernel/drivers/usb/gadget/
 Modify the /mnt/rootfs/opt/scripts/boot/am335x_evm.sh file so that the usb0 related lines are commented out.