Page 1 of 1
DIY Adapter not working on series s
Posted: Thu Apr 06, 2023 6:15 pm
by Mishimaboo
Hi, i'm trying to use a DIY adapter i made using an ATmega32U4 and an FT232RL, the controller i have plugged in to the PC is an original xbox one controller that has a headphone jack and the latest firmware on a series s, the setup i followed is the same as the one on this guy's video :
https://www.youtube.com/watch?v=INyVeTfYEPU
I was able to update the firmware with EMUXONE and everything seems to be working when i click start except that nothing happens on the xbox, i tried a config i made myself and some default ones but its always the same result, i tried with all input methods too, the xbox just doesn't register the inputs as if nothing is happening, here's a screenshot of how it looks, any help would be appreciated
Re: DIY Adapter not working on series s
Posted: Thu Apr 06, 2023 7:02 pm
by GoDlike
Make sure you pressed guide button on the controller itself first not on the device in gimx-Config. For xbox authentication to work you need to press guide button on Xbox controller first.
Re: DIY Adapter not working on series s
Posted: Thu Apr 06, 2023 7:46 pm
by Mishimaboo
GoDlike wrote: ↑Thu Apr 06, 2023 7:02 pm
Make sure you pressed guide button on the controller itself first not on the device in gimx-Config. For xbox authentication to work you need to press guide button on Xbox controller first.
I'm not sure if i'm doing it wrong but i have the controller plugged in, the xbox guide button led is on, i click start and the led turns off until it asks me to press it for 2 seconds, so i hold it down until it turns on again but still nothing happens on the xbox, not really sure what's wrong with this setup
Re: DIY Adapter not working on series s
Posted: Thu Apr 06, 2023 8:37 pm
by Mishimaboo
Mishimaboo wrote: ↑Thu Apr 06, 2023 7:46 pm
GoDlike wrote: ↑Thu Apr 06, 2023 7:02 pm
Make sure you pressed guide button on the controller itself first not on the device in gimx-Config. For xbox authentication to work you need to press guide button on Xbox controller first.
I'm not sure if i'm doing it wrong but i have the controller plugged in, the xbox guide button led is on, i click start and the led turns off until it asks me to press it for 2 seconds, so i hold it down until it turns on again but still nothing happens on the xbox, not really sure what's wrong with this setup
Update : I fixed it by reverting the controller's firmware down to 3.1.1221.0
Re: DIY Adapter not working on series s
Posted: Sat Apr 08, 2023 12:09 pm
by GoDlike
Thanks for update. This will help poeple with same problem.
Re: DIY Adapter not working on series s
Posted: Tue Aug 01, 2023 4:51 am
by Abra23
How did you reverting the controller frimware down to 3.1.1221.0
I have same issue I hold guide for 2 seconds nothing happens on the xbox
Re: DIY Adapter not working on series s
Posted: Tue Aug 01, 2023 4:53 am
by Abra23
Abra23 wrote: ↑Tue Aug 01, 2023 4:51 am
How did you reverting the controller frimware down to 3.1.1221.0
I have same issue I hold guide for 2 seconds nothing happens on the xbox
I trying on Xbox one s
Re: DIY Adapter not working on series s
Posted: Tue Aug 01, 2023 7:45 am
by Abra23
Abra23 wrote: ↑Tue Aug 01, 2023 4:51 am
How did you reverting the controller frimware down to 3.1.1221.0
I have same issue I hold guide for 2 seconds nothing happens on the xbox
Fixed I did it