Gimx adapter (Bought from offical store)
Brand new. Followed instructions on official site.
Flashed with EMUDFP - Connected to COM6. After tons of reeboots. It OFTEN does not allow me to select a com port - only shows a list of blanks ,even thougt it is always showing as com 6 in device manager. 3-4 restarts later it will work, making wanting me take it out and hammer it in anger...
Nothing happens when i connect the cable. Had it showing up in game controllers for a brief moment, like 2 minutes once. But havent seen it since. I have "usb port active" light on my USB hub, and it only stays lit for 10 sec when i connect the cable. The USB adapter stays lit all the time.
I do not have any more available usb ports on the motherboard , so it has to be connected via a hub.
Any suggestions ?
Brand New GIMX adapter not showing up / Working
Re: Brand New GIMX adapter not showing up / Working
The hub may be a problem here. We recommend not using a USB hub because it can lead to problems like these.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: Brand New GIMX adapter not showing up / Working
I've tested with front USB's and still the same there.
Re: Brand New GIMX adapter not showing up / Working
Make sure you have usb power saving disabled. You can also refresh COM ports in gimx by choosing File->Refresh.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike