Uninstall gimx and cp210x drivers -Reboot
Install everything again -Reboot.
Start ps4 first by pushing the on button on the console. Start gimx.
If this did not work -Is the UART recognized by windows device manager?
If not, then it's likely that the UART might be broken.
fail to read packet header from the gimx adapter
Re: fail to read packet header from the gimx adapter
I definitely think that my gimx is dead, after connecting it to 3 different PCs it still doesn't work, the two red lights continue to work but the PC doesn't detect it, does anyone know when they will replace the stock to be able to acquire another one or any ideas to be able to repair it, thank you for your help time to all those who have contributed to my help
Re: fail to read packet header from the gimx adapter
If its the UART thats broken, then order a new from ebay. -Uart usb cp2104.
Desoldier 3 wires from your excisting uart and soldier the new one in place.
Tx to Rx
Rx to Tx
GND to GND
Test.
Desoldier 3 wires from your excisting uart and soldier the new one in place.
Tx to Rx
Rx to Tx
GND to GND
Test.
Gimx Configs https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
Re: fail to read packet header from the gimx adapter
Is the arduino recognized by the computer?
Gimx Configs https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
Re: fail to read packet header from the gimx adapter
well I've been playing for a week and my gimx came back to life in my penultimate attempt, in case anyone else has the problem, in my case it was a usb multiplier when connecting my th8 change in usb 2.0 it gave conflict. thanks to all those who dedicated their time to help me
https://imageshack.com/i/pm72DsFTj
https://imageshack.com/i/pm72DsFTj
Re: fail to read packet header from the gimx adapter
Well done finding the problem.
Gimx Configs https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link
FRAGnStein/Scorch https://drive.google.com/drive/folders/ ... share_link