Hello guys,
Please, i need your help! I've made a driving simulator for my pc and some games does not recognize it as a controller. So, my only hope is GIMX. Please help me get my board from topic title get ready for this. I've spent at least 20h tryng to get the firmware and get things done, but i got in a non-return point.
LE: So, i uploaded g27 firmware on 32u4, using avrdude,
Connecting to programmer: .
Found programmer: Id = "CATERIN"; type = S
Software Version = 1.0; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=128 bytes.
Programmer supports the following devices:
Device code: 0x44
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude.exe: Device signature = 0x1e9587
avrdude.exe: reading input file "atmega32u4.hex"
avrdude.exe: writing flash (4440 bytes):
Writing | ################################################## | 100% 0.46s
avrdude.exe: 4440 bytes of flash written
avrdude.exe: verifying flash memory against atmega32u4.hex:
avrdude.exe: load data flash data from input file atmega32u4.hex:
avrdude.exe: input file atmega32u4.hex contains 4440 bytes
avrdude.exe: reading on-chip flash data:
Reading | ################################################## | 100% 0.14s
avrdude.exe: verifying ...
avrdude.exe: 4440 bytes of flash verified
avrdude.exe: safemode: Fuses OK
avrdude.exe done. Thank you.
but board goes off after that.
ITSY BITSY 32U4 16MHZ 5V
Re: ITSY BITSY 32U4 16MHZ 5V
I see you uploaded a firmware. Now you should connect adapter to the PC and test it. Did you do that?
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: ITSY BITSY 32U4 16MHZ 5V
hello,
i did. i have connected both usb on my PC, but led from ITSY BITSY 32U4 16MHZ 5V stays off, and in device manager there's nothing recognized after uploading the firmware. I have also connected USB from board to PS4 and the other one on PC, but still the same, no device detected.
i did. i have connected both usb on my PC, but led from ITSY BITSY 32U4 16MHZ 5V stays off, and in device manager there's nothing recognized after uploading the firmware. I have also connected USB from board to PS4 and the other one on PC, but still the same, no device detected.
Re: ITSY BITSY 32U4 16MHZ 5V
It is expected to see no device attached until you click start in gimx.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike