I don't think using a higher baudrate will fix the issue. That said, it would be nice for cp2102-based adapter owners if it could run at 2Mbps.
I do have a DFGT wheel in the basement, and some RPi boards on my desk (but not version 4). I'll try to have a look in the next days.
G25 with GIMX 8.0 on RPi4B
Re: G25 with GIMX 8.0 on RPi4B
GIMX creator
Re: G25 with GIMX 8.0 on RPi4B
Is this an evidence that my CP2102 can 2kk?
Code: Select all
GIMX adapter detected, controller type is: G29 PS4.
Firmware version: 8.0
Reset sent to the GIMX adapter.
Current baudrate: 500000 bps.
Trying baudrate: 2000000 bps.
Using baudrate: 2000000 bps.
found pass-through device 0x054c:0x09cc
rounding timer period 1000us to 998us
registered joystick 0 with name "PS4 Controller"
Thanks I will wait for any other idea...Matlo wrote: ↑Fri May 29, 2020 1:32 pm I don't think using a higher baudrate will fix the issue. That said, it would be nice for cp2102-based adapter owners if it could run at 2Mbps.
I do have a DFGT wheel in the basement, and some RPi boards on my desk (but not version 4). I'll try to have a look in the next days.
Re: G25 with GIMX 8.0 on RPi4B
Hi guys.
Some news?
Some news?
- LoneWolf81
- Posts: 235
- Joined: Sat Jun 15, 2019 11:49 am
- Location: South Africa
Re: G25 with GIMX 8.0 on RPi4B
Hey
I have something we can try if you dont mind, recently there was a new release of the Rpi4B the 8GB model and with it came a new OS simply named Raspberry Pi OS its not built on Raspbian this is the link for the 32 bit version. I hope that this will actually perform better.
https://downloads.raspberrypi.org/raspios_armhf_latest
I have something we can try if you dont mind, recently there was a new release of the Rpi4B the 8GB model and with it came a new OS simply named Raspberry Pi OS its not built on Raspbian this is the link for the 32 bit version. I hope that this will actually perform better.
https://downloads.raspberrypi.org/raspios_armhf_latest
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX .
Re: G25 with GIMX 8.0 on RPi4B
This Raspberry Pi OS was installed on my RPi4 when we tried last fixes. So I have an idea. Can I somewhere download an oldest Raspbian which work on the RPi4 and install the Gimx without update? Because all my tries was maybe just on new Raspberry Pi OS. So I just need to know which oldest version of Raspbian work smooth with RPi4.LoneWolf81 wrote: ↑Thu Jun 04, 2020 12:41 pm OS simply named Raspberry Pi OS its not built on Raspbian
- LoneWolf81
- Posts: 235
- Joined: Sat Jun 15, 2019 11:49 am
- Location: South Africa
Re: G25 with GIMX 8.0 on RPi4B
Here's the index of all the images since raspbian wheezy, you wont be able to go back to far if I recall you can only run buster on the Pi4 as that came out when it was released and stretch went into end of life.
This was the first version of buster
https://downloads.raspberrypi.org/raspb ... 019-06-24/
This was the first version of buster
https://downloads.raspberrypi.org/raspb ... 019-06-24/
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX .
Re: G25 with GIMX 8.0 on RPi4B
Tested but without positive result. Problem remains.
- LoneWolf81
- Posts: 235
- Joined: Sat Jun 15, 2019 11:49 am
- Location: South Africa
Re: G25 with GIMX 8.0 on RPi4B
Here is a 64 bit image with GIMX 8 already loaded it was created on a RPI4B 2GB Model, I used 7 zip to compress it. Password was set to password so I recommend you change it after its loaded.
https://drive.google.com/file/d/1RMV5a- ... sp=sharing
Kernel version
https://drive.google.com/file/d/1RMV5a- ... sp=sharing
Kernel version
Code: Select all
Linux 5.4.42-v8+ #1319 SMP PREEMPT Wed May 20 14:18:56 BST 2020 unknown
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX .
Re: G25 with GIMX 8.0 on RPi4B
Last evening I tested my DFGT on a RPi3B with 2020-05-27-raspios-buster-armhf (and all updates applied) and GIMX 8.0.
I also observed from time to time the LIBUSB_TRANSFER_TIMED_OUT errors. These errors happen when the hardware is not able to respond in due time. Despite these errors the force feedback is quite functional on my setup.
I'll have a look at getting these errors disappear. Maybe there is some kernel parameter that can solve this.
I also observed from time to time the LIBUSB_TRANSFER_TIMED_OUT errors. These errors happen when the hardware is not able to respond in due time. Despite these errors the force feedback is quite functional on my setup.
I'll have a look at getting these errors disappear. Maybe there is some kernel parameter that can solve this.
GIMX creator
Re: G25 with GIMX 8.0 on RPi4B
Tried - it did the same problem (wheel gets stuck) but the log didn't shows the timeout error - here is the log file https://drive.google.com/file/d/1qOij58 ... sp=sharingLoneWolf81 wrote: ↑Thu Jun 11, 2020 10:50 am Here is a 64 bit image with GIMX 8 already loaded it was created on a RPI4B 2GB Model