Page 1 of 1
Couple of questions due to the DIY USB Adapter Guide
Posted: Sat Feb 08, 2020 12:40 am
by BreeziTV
On the
CP2102 adapter, will any of them work? Cause there's one for only a dollar.
On the
Teensy 2.0 board is it just connecting it to the aforementioned adapter?
I know this sounds dumb but this is my first tech creation thingy and I really want to be cautious. If anyone's curious of what wheel I have for this, here it is.
Re: Couple of questions due to the DIY USB Adapter Guide
Posted: Sat Feb 08, 2020 12:53 am
by BreeziTV
Main games I'm gonna play are:
Re: Couple of questions due to the DIY USB Adapter Guide
Posted: Sat Feb 08, 2020 8:26 am
by Matlo
Topic moved to discussion section.
Yes, the CP2102 should work fine, but I would advise buying a CP2104 which can transmit at higher speed.
And yes, the only thing to do is to connect both parts. To avoid issues, either get a Teensy 2.0 with pins, or solder wires.
Your wheel is a Logitech Driving Force. There is an official configuration for it, it is named LogitechDrivingForce_G29.xml.
The main limitation this wheel has is the turning range which is only 200 degrees. You'll have to set in-game wheel range to something close to this value. Not sure this is possible in all games. You may want to get a second hand Logitech Driving Force GT which has an adjustable max turning range of 900 degrees.