Page 1 of 1
thrustmaster tx
Posted: Tue Nov 28, 2017 11:04 pm
by Mc2face
Dear Matlo,
Thanks so much for all your work on this.
I've been reading all the threads I can but I can't tell if I should expect ffb using a thrustmaster tx emulating either a g29 or t300?
I've configured it as both, both config work, minus the ffb.
I've assigned ffb to the wheel axis in ffb tweaks, no change?
All I can confirm is that him should work with any wheel using direct ffb via windows. Only I can't confirm if that's the protocol my tx wheel uses?
Any help or confirmation would be much appreciated.
Cheers,
Reine
thrustmaster tx
Posted: Wed Nov 29, 2017 7:18 pm
by Mc2face
Hi,
I worked it out thanks,
so I can now confirm the thrustmaster tx works on gran turismo sport using gimx.
My problem was I had flashed the t300rs firmware as it's a good match for my wheel, but it turns out only the Logitech g29 ffb signals are being read.
Once I re-flashed the g29 firmware I instantly knew I had force feed back as the wheel kicked in and centred itself.
However, I still had a problem, during all my fault finding I had connected to a USB 3.0 port and although it was 'working' the wheel was just pulling left then right...
Luckily before I did much more fault finding/fiddling, I plugged in to a USB 2.0 port and voila, perfect emulation with zero lag and true ps4 style ffb. I know it's true as I have a t300rs available to compare it to and they feel identical.
Great work, thanks.
Re: thrustmaster tx
Posted: Wed Nov 29, 2017 7:26 pm
by Matlo
Hi,
Thanks for the feedback!
Could you please post your configuration?
Re: thrustmaster tx
Posted: Tue Aug 06, 2019 11:19 pm
by maberalc
Is there any config file for this out there?
Re: thrustmaster tx
Posted: Thu Sep 08, 2022 7:22 am
by goname31
Mc2face wrote: ↑Wed Nov 29, 2017 7:18 pm
Hi,
I worked it out thanks,
so I can now confirm the thrustmaster tx works on gran turismo sport using gimx.
My problem was I had flashed the t300rs firmware as it's a good match for my wheel, but it turns out only the Logitech g29 ffb signals are being read.
Once I re-flashed the g29 firmware I instantly knew I had force feed back as the wheel kicked in and centred itself.
However, I still had a problem, during all my fault finding I had connected to a USB 3.0 port and although it was 'working' the wheel was just pulling left then right...
Luckily before I did much more fault finding/fiddling, I plugged in to a USB 2.0 port and voila, perfect emulation with zero lag and true ps4 style ffb. I know it's true as I have a t300rs available to compare it to and they feel identical.
Great work, thanks.
What should be connected to an USB 2.0? The wheel or the adapter? I use a TX on series X (need Gimx to use my Asetek Forte Pedals). Everything work for about one minute then I have warnings in the command window, then the wheel is pulling in one direction. Then no ffb, ffb again, warnings etc.
Re: thrustmaster tx
Posted: Fri Sep 09, 2022 1:25 am
by kaiba_seto2004
Since there's no wheel firmware on xbox one, which firmware did you use?