I tried many different versions from 6.5 -6.9 32/64bit but whith no luck.
It will start but will went off unpredictable.
Today I managed a 1 hour run with these setting:
Code: Select all
gimx.exe -c mra.xml -p COM17 --nograb --refresh 50 --log log.txt --status
But in the end is stops working.
Here is a snip from the log (start and end).
At the end you see me pushing the PS button several times. At that moment the control was gone.
It seems like the refresh option has a direct link to the stability in terms of time since its stops working.
The PC side seems still working (flashing leds on input and messages in the logs) and on the PS4, connection is still there but unresponsive (because if I reset the arduino a popup message came up on PS4 to show the disconnection).
So, for me, it seems the UART TTL and the arduino connection become lost (out of sync?)
Log Start
Code: Select all
global option -l with value `log.txt'
grab flag is unset
status flag is set
GIMX 6.9 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (15063)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156250 max=5000 current=5004
mouse 0 has name 'Fanatec Wheel Virtual Mouse' and virtual id 0
mouse 1 has name 'HID-konforme Maus' and virtual id 0
mouse 2 has name 'HID-konforme Maus' and virtual id 1
keyboard 0 has name 'HID-Tastatur' and virtual id 0
keyboard 1 has name 'Fanatec Wheel Virtual Keyboard' and virtual id 0
keyboard 2 has name 'HID-Tastatur' and virtual id 1
keyboard 3 has name 'HID-Tastatur' and virtual id 2
keyboard 4 has name 'HID-Tastatur' and virtual id 3
joystick 0 has name 'PS4 Controller' and virtual id 0
joystick 1 has name 'HE Sequential Shifter' and virtual id 0
joystick 2 has name 'FANATEC ClubSport Pedals V3' and virtual id 0
joystick 3 has name 'SimuCUBE' and virtual id 0
joystick 4 has name 'vJoy Device' and virtual id 0
joystick 5 has name 'FANATEC ClubSport Wheel Base' and virtual id 0
joystick 6 has name 'BU0836-LC Interface' and virtual id 0
Warning: can't open macro directory C:\Users\mra\AppData\Roaming//gimx//macros/
FFB device: SimuCUBE 0 (OS translation).
FFB invert: no
Press the PS button to activate the controller.
0 1508672565.321998
0 1508672570.588538, wheel (-255)
0 1508672570.837163, wheel (-256)
0 1508672570.986433, wheel (-256), PS (255)
adjust your wheel range to 900 degrees
0 1508672571.135383, wheel (-254), PS (255)
0 1508672571.185431, wheel (-254)
0 1508672573.573817, wheel (-254)
0 1508672573.722269, wheel (-257)
and end
Code: Select all
0 1508676343.851104, wheel (-1991)
0 1508676343.901202, wheel (-1983)
0 1508676343.950801, wheel (-1983)
0 1508676344.000906, wheel (-2000)
0 1508676344.050451, wheel (-2005)
0 1508676344.100000, wheel (-2006)
0 1508676344.149459, wheel (-2004)
0 1508676344.199492, wheel (-1987)
0 1508676344.249488, wheel (-1954)
0 1508676344.299109, wheel (-1832)
0 1508676344.349190, wheel (-1533)
0 1508676344.398338, wheel (-1165)
0 1508676344.447905, wheel (-752)
0 1508676344.497474, wheel (-388)
0 1508676344.547223, wheel (-143)
0 1508676344.597369, wheel (-9)
0 1508676344.647414, wheel (-2)
0 1508676344.696962, wheel (-87), PS (255)
0 1508676344.747045, wheel (-107), PS (255)
0 1508676344.796170, wheel (-57), PS (255)
0 1508676344.845843, wheel (-49), PS (255)
0 1508676344.895911, wheel (-74)
0 1508676344.945980, wheel (-104)
0 1508676344.995590, wheel (-112), PS (255)
0 1508676345.045248, wheel (-79), PS (255)
0 1508676345.094879, wheel (-70), PS (255)
0 1508676345.144927, wheel (-76)
0 1508676345.194974, wheel (-77)
0 1508676345.244632, wheel (-74), PS (255)
0 1508676345.294264, wheel (-71), PS (255)
0 1508676345.343849, wheel (-71)
0 1508676345.393896, wheel (-80)
0 1508676345.443443, wheel (-96), PS (255)
0 1508676345.492990, wheel (-93)
0 1508676345.542632, wheel (-72)
0 1508676345.591771, wheel (-65)
0 1508676345.641355, wheel (-83)
0 1508676345.691114, wheel (-89), PS (255)
0 1508676345.740751, wheel (-79), PS (255)
0 1508676345.790347, wheel (-74), PS (255)
0 1508676345.839507, wheel (-79)
0 1508676345.889152, wheel (-83), PS (255)
0 1508676345.938758, wheel (-92), PS (255)
0 1508676345.988482, wheel (-81)
0 1508676346.037936, wheel (-71)
0 1508676346.087995, wheel (-79), PS (255)
0 1508676346.137180, wheel (-87)
0 1508676346.186772, wheel (-79)
0 1508676346.236858, wheel (-81)
0 1508676346.286905, wheel (-78)
0 1508676346.336956, wheel (-84), PS (255)
0 1508676346.387023, wheel (-77), PS (255)
0 1508676346.436853, wheel (-73), PS (255)
0 1508676346.486900, wheel (-65)
0 1508676346.536257, wheel (-51)
0 1508676346.586356, wheel (-65), PS (255)
0 1508676346.635756, wheel (-74), PS (255)
0 1508676346.685348, wheel (-59)
0 1508676346.735442, wheel (-62)
0 1508676346.785113, wheel (-72), PS (255)
0 1508676346.835231, wheel (-74)
0 1508676346.884338, wheel (-72)
0 1508676346.933939, wheel (-76)
0 1508676346.984018, wheel (-74)
0 1508676347.033680, wheel (-76)
0 1508676347.083258, wheel (-75)
Exiting
rounding timer period to 500
rounding timer period to 49539