Page 1 of 1
GIMX Nearly Works, But Not Quite. HELP
Posted: Sat Jul 16, 2016 5:51 pm
by Haiden14
After about 5 hours of trying, i finally got my Driving Force GT wheel and ps4 controller to simultaniouslt 'check' on Gimx. When i click 'start', it runs a couple of things in the command thing, no errors come up, and thats it. i unplug my PS4 controller to use my PS4 and the steering wheel doesnt work. Any help would be great.
Re: GIMX Nearly Works, But Not Quite. HELP
Posted: Sun Jul 17, 2016 7:52 am
by Matlo
The DS4 has to be plugged to the computer while GIMX is running.
You can't use it with the PS4 at the same time as the wheel.
Re: GIMX Nearly Works, But Not Quite. HELP
Posted: Sun Jul 17, 2016 10:55 am
by Haiden14
Thank you for your reply.
Since writing my post i have established that unplugging the DS4 stops the whole process, so i have tried the following.
From a newly powered on laptop, loading the teensy with both the at90usb1286, and atmega32u4 firmwares.
pluging in the powered off DS4, on which a yellow light appears.
pluging in the DFGT wheel and opening Logitech gaming software (which registers button pushes from the wheel)
i have tried powering the PS4 on now with the button on the console now, and after opening and starting GIMX.
i then start GIMX. in order for GIMX to register my wheel, i had to change the names in the LogitechDrivingForceGT_29 config file to 'Driving Force GT'.
i click check, everything is ok. i then click start, a black window pops up and it runs some things.
the black window then closes and thats it. the wheel doesnt do a thing on the ps4...
i have tried this, with different firmware variables, and turning the PS4 on at different points wiilst changing round the 2 wires on the teensy which are sometimes labeled wrongly..
Any thoughts?
Re: GIMX Nearly Works, But Not Quite. HELP
Posted: Sun Jul 17, 2016 11:17 am
by Haiden14
I'm probably missing something simple...
Re: GIMX Nearly Works, But Not Quite. HELP
Posted: Fri Jul 29, 2016 6:02 am
by Matlo