G27 + PS4 + Ubuntu in Parallels | RPi Model B

[LastDanmer]

Hello. I used to run it on RPi Model B and in Ubuntu in VM (Parallels on Mac OS X). And always get an error:

If started from launcher:

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 i386
Ubuntu 14.04.4 LTS
Linux 4.2.0-36-generic #42~14.04.1-Ubuntu SMP Fri May 13 17:30:34 UTC 2016 i686
Bus 003 Device 003: ID 203a:fffa  
Bus 003 Device 002: ID 203a:fff9  
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 006: ID 054c:05c4 Sony Corp. DualShock 4
Bus 004 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 004 Device 004: ID 203a:fffe  
Bus 004 Device 003: ID 046d:c29b Logitech, Inc. G27 Racing Wheel
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 4, If 0, Class=Hub, Driver=hub/15p, 12M
        |__ Port 1: Dev 5, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        |__ Port 2: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/15p, 480M
    |__ Port 1: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 1: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 2: Dev 3, If 0, Class=Printer, Driver=usblp, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
native mode is already enabled for HID device 04:01 (PID=c29b)
can't read packet header
No controller detected.
adapter_detect failed

If started from command line with params `--config LogitechG27_G29.xml --port /dev/ttyUSB0`:

Code: Select all

global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
native mode is already enabled for HID device 04:01 (PID=c29b)
can't read packet header
No controller detected.
adapter_detect failed

I have: DIY USB adapter (USB Converter side) + G27 + DS4 connected through USB HUB to PC
USB Adapter: USB/UART TTL converter CP2102 6pin https://vk.com/photo-63602362_360933293
AVR Board: Teensy 2.0
Firmware: firmwares-5.8/EMUG29PS4/atmega32u4.hex
Console: PS4
Controller: Logitech G27

Thank you.
P.S. sorry for my english.

[LastDanmer]

Sorry for posting this. Found solution.