Game Input MultipleXer

Hi there,
i own a PS4 and a Logitech DriveFx wheel that i used with my X360.
Is thre any chance that this wheel to be recognized,just like the G27 or G25 wheels ?
Thanks

Anyone ?
Anyone tried the setup with such a wheel ? Its a logitech..
Thanks

Hi,
I'm not sure about this wheel. It may use a specific protocol.
The only way to know is to try. If you plan to try it, let me know and I'll provide you some test software.

Ok, will build my Diy USb adapter and test it. I will then ask for your help again Matlo !

Thank you

Usb adapter parts just ordered.
Meanwhile, i've connected the wheel to my lubuntu 14.04 box and here is the results from dmesg:

[ 532.796419] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 532.796510] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 532.808260] usb 2-1: USB disconnect, device number 2
[ 540.664133] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[ 540.879113] usb 2-1: New USB device found, idVendor=046d, idProduct=caa3
[ 540.879129] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 540.879140] usb 2-1: Product: DriveFX Racing Wheel
[ 540.879150] usb 2-1: Manufacturer: Logitech Corporation
[ 540.879161] usb 2-1: SerialNumber: 44E508A
[ 540.882570] input: Generic X-Box pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input20


and from lsusb :
lsusb
Bus 001 Device 002: ID 04f2:b191 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:caa3 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

What can i test more ?
Thanks

Hi there,

I've already built my DiY usb adapter and all is working correctly.

I've sucessfully configured my DriveFx wheel to work with GIMX in linux, and PS4 Project Cars.

I had to manually configure the wheel's buttons and axis, and it works (although no Axial Feedback, as it existed in Xbox360).

Thanks !

Hi,
I think axial feedback is not the same as force feedback, which means this wheel is not compatible with the G29 feedback.