Game Input MultipleXer

Hi,

I flashed one arduino leonardo with the firmware EMUPS4 atmega32u4.hex with the avrdude and after the flash the arduino is not detected under windows 10 and event not connected to PS4.

I'm missing anything? Or is this the normal behavior?

Can I use one USB-COM232-PLUS with chip FTDI FT232R?? Is a USB-DB9 connection...

Thanks,
Rodolfo Antunes

Hi,

Yes this is expected as the GIMX firmware reprograms the USB interface.
You still can upload a new firmware as explained on the wiki:
http://gimx.fr/wiki/index.php?title=DIY ... sed_boards

You can't use a RS232 adapter as it does not work at the right voltage level.

Thank you Matlo,

I will order one CP1202

Regards,
DejaVu