Game Input MultipleXer

Hello Matlo,

I've been using GIMX with XBone for some time.
I've downloaded latest firmware and wanted to use GIMX with my PS4.
Teensy is not recognized.

Firmware used:
firmwares-5.0/EMUPS4/atmega32u4.hex
firmwares-5.0/EMUXONE/atmega32u4.hex

Xbone setup works fine, PS4 is not recognised.
Any tips?

Hello,
Please describe your setup as requested here:
http://gimx.fr/forum/viewtopic.php?f=5&t=691
And also please post the content of the cmd window.

the GIMX software version - 5.0 - works with XBone
the OS: Ubuntu 64bits and Raspbian (tested on laptop and Raspberry PI) - works with XBone
bluetooth DODOCOOL - worked with PS4 before
DIY USB adapter Teeny 2.0 - worked with PS4 before, works with XBone
USB to serial adapter USB 2.0 to TTL UART 6PIN Module Serial Converter CP2102 STC - worked with PS4 before, works with Xbone
Firmware (version + folder + file)
firmwares-5.0/EMUPS4/atmega32u4.hex - do not work
firmwares-5.0/EMUXONE/atmega32u4.hex - work
the console: Xbox one - working just fine
the console: PS4 - Not recognising Teensy

When adding new pairing, I can connect DS4 but doesn't go through "connect teensy" prompt.
I've been using PS4 with previous versions of GIMX before and I'm 100% sure my setup works.
It looks like it's firmware issue

You have to select DIY USB as output to use the EMUPS4 firmware.
The Bluetooth method uses a different firmware called EMUPS4PAIRING.

EMUPS4PAIRING is not included in latest firmware - this looks like solution to my problem.
Can you upload it somewhere?

For Xbox I use one and only method - DIYUSB.

For PS4 I wanted to use "reglar" method - Bluetooth/PS4.

Any reason not to use the USB method with the PS4?

EMUPS4PAIRING is available here: http://gimx.fr/wiki/index.php?title=PS4
It is not provided with the other firmware because it has a very different purpose, and it would be very confusing to distribute it in the same archive.

Got it already from my old archives
I knew it will be case of firmware.
I did not know I can connect PS4 via "cable method"+ DIYUSB.
I'll test it.
THX for your help!!

OK, another issue.
I've tried both ways - Bluetooth and DIY USB (both firmwares).
GIMX is working fine but PS4 is not reacting on GIMX inputs.
http://screenshot.sh/odylc7CW8RBlA

Any idea?

Press the PS button.

Well, you forgot to add "unplug the pad before pushing PS button".
Way of connecting changed since I used it last time
Everything works fine now