T300 without feedback

[sayser]

hello everyone! why is there no force feedback at all on thrustmaster T300? the configuration chose Dualshock4_T300_PS4 UPD:edited the configuration file and added the following:
<force_feedback>
<device type="joystick" id="0" name="Thrustmaster T300RS Racing Wheel"/>
<g29_correction min_gain="20" range_start="4000" range_end="10000"/>
<gain rumble="100" constant="100" spring="100" damper="100"/>
</force_feedback>
Force feedback appeared, but gimx-launcher swears at the error: bad element name: g29_correction
Another question is why there are no configurations on raspberry Dualshock4_T300RS_PS4.xml how is it in windows?

[kacklappen23]

The T300 emulator does not support ffb. You need to use G29_PS4 if you want ffb.

The G29_Correction thing is only needed for a modified GIMX version one user created to stop oscillation around center. A normal GIMX build will throw an error. It also breaks the config and check functions.

[sayser]

thank you for the answer! I've already tried G29_PS4, and I don't have a force feedback, and the dead zone is very small, I attached a video: https://youtu.be/xtu-hnadi6c. Another problem, the pedals are connected to the base directly, but gimx does not define them as a joystick with a mouse

[kaiba_seto2004]

Please post the log file on pastebin and add the link into your post.

[yamslemur]

thank you for the answer! funny shooter 2 I've already tried G29_PS4, and I don't have a force feedback, and the dead zone is very small, I attached a video: https://youtu.be/xtu-hnadi6c. Another problem, the pedals are connected to the base directly, but gimx does not define them as a joystick with a mouse

Hi
I've watched the video and haven't found the software bug yet. Any new updates?