I uploaded the g29ps4 firmware, connect it to the pc and ps4, run it and give this error.
Tried different cables, firmware and swapped tx / rx
How do I fix this error?
https://ibb.co/TwV10tH
failed to read packet header from the gimx adapter
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: failed to read packet header from the gimx adapter
Any ports than COM10? I think you selected wrong port for UART side.
PS4 enthusiast.
Re: failed to read packet header from the gimx adapter
with the problem that I figured out in the picture, and now the following is helpful:
Error: failed to open the GIMX adapter
Error: failed to send data to the GIMX adapter
com ports changing does not help, but in the gimx program it is fashionable to select only one active port
Error: failed to open the GIMX adapter
Error: failed to send data to the GIMX adapter
com ports changing does not help, but in the gimx program it is fashionable to select only one active port
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: failed to read packet header from the gimx adapter
Which port was showed in devices and printers?
PS4 enthusiast.
Re: failed to read packet header from the gimx adapter
I have the same problem. suddenly it stopped working, how can I solve it