Good day,i build by arduino leonardo a gimx adapter but the pc doesn't detect its.
This is the picture of problem:
https://drive.google.com/file/d/1F0l4xw ... p=drivesdk
The pc doesn't detect the adapter(diy)
Re: The pc doesn't detect the adapter(diy)
Long story short: is it programmed? Did you RTFM? Programming through app is not working in my opinion, at least not easy way. I used a separate programmer USBAsp exactly and AVRDUDESS
Re: The pc doesn't detect the adapter(diy)
thank for replay,i find a way to install avrdude because follow the officialguide of gimx it say me that avrdude isn't a command.
Re: The pc doesn't detect the adapter(diy)
Use gimx-loader to flash firmware, it is designed for it.
Check wiring and cables, also check if RX/TX isn't inverted. Please post photo of wiring.
Check wiring and cables, also check if RX/TX isn't inverted. Please post photo of wiring.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike