Ok so I am running the latest version of Gimx on raspbian stretch, I am using the homemade adapter using an Arduino Leonardo and the CP2102 ttl to usb adapter. The adapter is running the atmega32u4.hex. When I run Gimx with my fortnite config I get to the point when it tells me to press guide to activate the controller, once I do this nothing happens to the Gimx screen but it does let me control my xbox with my mouse and keyboard. However when I press the guide button again it exits Gimx, this also happens by itself sometimes if I leave for a bit. I have been looking on google for about 3 hours now and found similar articles but none of there solutions have worked for me, please help. Thanks.
https://pastebin.com/bdBteuB8
(Xbox One)(RPI) Gimx exits when guide button is pressed
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
The cause is probably that the guide button of the input controller is not bind to the guide button of the output/emulated controller.
You can either add a binding, or not use the controller at all (except for the activation).
You can either add a binding, or not use the controller at all (except for the activation).
GIMX creator
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
What do you mean? What I do when I try to start gimx is, start my rpi,plug the controller in to the pi, plug the adapter into the Xbox then plug it into the pi, after that I open gimx and hit start. What I have to do right after I start it is exit gimx because when I plug my Xbox controller into rpi it auto turns on and exiting it turns the controller off. Then I start gimx again and I get to the point where it askes me to activate the controller, so I press the button on my keyboard that I have bound to the guide button and then the gimx screen, the gimx screen stays frozen on press the activation button but I can control my Xbox for a limited amount of time. If i try to hit the guide button on the controller nothing happens, it only works if I press the guide button on the keyboard. I can send pics if you want and or I can post a vid on YouTube.
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
Please make another log file. Reproduce the issue while generating the log file.
GIMX creator
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
https://pastebin.com/yNuWAvKx
Ok here is is, when it says guide (225) thats me pressing L on my keyboard. You can see in my config that I have L bound to the guide button. What happens is I press L on the keyboard to activate the controller, then I press L again and it shuts off my controller and says that the controller disconnected (error message).
Ok here is is, when it says guide (225) thats me pressing L on my keyboard. You can see in my config that I have L bound to the guide button. What happens is I press L on the keyboard to activate the controller, then I press L again and it shuts off my controller and says that the controller disconnected (error message).
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
You may need to press guide button for 3-5 seconds. Try this
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
Tried that, still has the same issue.
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
Got anymore ideas?
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
No for now, keep in mind that RPI support is still experimental, there may be bugs like that. We recommend using Linux/Windows machine for now.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: (Xbox One)(RPI) Gimx exits when guide button is pressed
Please try with the XOnePadUsb.xml config and check if it behaves the same. This may help understanding the issue.
GIMX creator