RPi3 without any adapter

Need help? Ask here and someone will help
Post Reply
Rushzero
Posts: 3
Joined: Mon May 21, 2018 1:01 pm

RPi3 without any adapter

Post by Rushzero »

Hi

Is it possible to to get gimx running without any adapter?
I have only some raspberry pi’s and some arduino duo boards..

Thanks
User avatar
kaiba_seto2004
Posts: 553
Joined: Sat Jul 15, 2017 9:15 am

Re: RPi3 without any adapter

Post by kaiba_seto2004 »

You can use onboard UART interface, refer here on wiki:
PS4 enthusiast.
Rushzero
Posts: 3
Joined: Mon May 21, 2018 1:01 pm

Re: RPi3 without any adapter

Post by Rushzero »

But you need a CP**** part?
Or can I reuse a usb cable to connect it to the pins ?
User avatar
kaiba_seto2004
Posts: 553
Joined: Sat Jul 15, 2017 9:15 am

Re: RPi3 without any adapter

Post by kaiba_seto2004 »

No, you don't. Just connect arduino pins (atmega32u4 chip) to GPIO pins (on Rpi), don't forget to use resistors. I see you got arduino due. I'm not sure it will work or not.
PS4 enthusiast.
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: RPi3 without any adapter

Post by GoDlike »

Arduino due is an ARM chip. For the firmware to work you need atmega32u4 based chip.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Rushzero
Posts: 3
Joined: Mon May 21, 2018 1:01 pm

Re: RPi3 without any adapter

Post by Rushzero »

Oh no :oops:

Is there any solution to do it with an ARM Chip? any hints?
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: RPi3 without any adapter

Post by GoDlike »

I don't think there is. Just buy some chip on atmega32u4 or our official adapter.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Post Reply