Will this TTL adapter work?

Discuss everything to do with GIMX here
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Will this TTL adapter work?

Post by kamperkilla87 »

@Matlo thanks. I'd like to leave some positive feedback. Also I want to make an adapter myself for a friend. I have a arduino pro micro already. Will this ttl adapter work along with it?


https://www.amazon.com/gp/aw/d/B00LODGR ... ref=plSrch
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Macros

Post by kamperkilla87 »

@Matlo will this ttl adapter work along with the arduino pro micro?
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Will this TTL adapter work?

Post by GoDlike »

Hello,

I split the topic because the next question was quite different from the first one.

Regards,
Daniel
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Will this TTL adapter work?

Post by Matlo »

Yes, it should work fine.
GIMX creator
Gevorian
Posts: 33
Joined: Fri Dec 29, 2017 10:20 pm

Re: Will this TTL adapter work?

Post by Gevorian »

I have the same one, works fine.
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Will this TTL adapter work?

Post by kamperkilla87 »

Here is the arduino an the ttl adapter. I've read the diy adapter wiki but am confused on what needs to be soldered together. Also what do i need to flash? The arduino? Ttl adapter? Or both?

Image
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Will this TTL adapter work?

Post by kamperkilla87 »

Sorry, I reread the wiki. Its working like a charm.
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Will this TTL adapter work?

Post by kamperkilla87 »

SOMETHINGS WRONG. I put the adapter together last night an it was working fine. i used it for a while last night with no issues, an today i also used it for a little bit with no problems. I recently tried to start up gimx with the diy adapter an was met with an error. it also stated gimx ran less than five seconds. if that helps. i tried using my GIMX store bought adapter an everything works as it should.

here is the log file

https://pastebin.com/X7Rqbn0t
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Will this TTL adapter work?

Post by Matlo »

Look for bad contacts and/or faulty USB cables.
GIMX creator
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Will this TTL adapter work?

Post by kamperkilla87 »

Checked continuity between the arduino an ttl adapter an everything is fine. Connections are solid, using legs an jumper cables. Still failing to start sometimes. I get it working after a few failed attempts. An when it works it works until stopping it without any error.
Post Reply