Gimx adapter & Rpi3 model B

Need help? Ask here and someone will help
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Gimx adapter & Rpi3 model B

Post by kamperkilla87 »

@Matlo I've managed to actually get my mouse to move up,down,left, right when telling it to. But no matter what I change in my config it is super laggy an jittery. I've played with x/y ratio, sensitivity, acceleration, etc. I want to change the polling rate of my mouse. An see if it resolves my issue. Will you please let me know how to do so. All I know is I have to open a terminal, I read the thread about it. Didn't really explain as to how exactly. My mouses polling rate is 1,000 hz. What would you recommend changing it to? I really want to get things working. Thanks
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Gimx adapter & Rpi3 model B

Post by GoDlike »

All config editors like gimx config gimx fpsconfig and mouse calibration edits the same value so if you save in one it will show up in the other one. For easy adjusting x/y ratio i recommend using mouse calibration or fpsconfig

This information is already available on the wiki - https://gimx.fr/wiki/index.php?title=Ax ... parameters

If config is laggy then dz is too high or acceleration is too low. Jittery is as I said earlier. I don't have Xbox One to test. Sorry.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Gimx adapter & Rpi3 model B

Post by kamperkilla87 »

Once at this point in the terminal what do i do? I would like to try 250hz
Image
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Gimx adapter & Rpi3 model B

Post by kamperkilla87 »

Great news! Finally got it working. After some research I found out the native mouse polling rate of the Pi3 is only 62.5 And as I thought changing that fixed my issue. Thanks for all the help guys! Now it's a learning curve getting used to mouse an keyboard.
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Gimx adapter & Rpi3 model B

Post by GoDlike »

That's really low value, how did you change it?
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Gimx adapter & Rpi3 model B

Post by Matlo »

@kamperkilla87
To calibrate your mouse you should follow the instructions here: https://gimx.fr/wiki/index.php?title=Mouse_Calibration
GIMX creator
kamperkilla87
Posts: 144
Joined: Tue Mar 13, 2018 7:10 am

Re: Gimx adapter & Rpi3 model B

Post by kamperkilla87 »

@Godlike I had to edit the boot/cmdline.txt of the Pi. Set it as usbhid.mousepoll=1 which if I remember correctly it is 1,000hz instead of the default. Works like a charm now.
Last edited by kamperkilla87 on Thu Mar 29, 2018 4:28 pm, edited 1 time in total.
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Gimx adapter & Rpi3 model B

Post by GoDlike »

Thanks, that's very useful info :)
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Post Reply