A4TECH 7700N not partially wokring with GIMX

Need help? Ask here and someone will help
Post Reply
sephirotdnf
Posts: 69
Joined: Sat Feb 23, 2013 4:11 pm

A4TECH 7700N not partially wokring with GIMX

Post by sephirotdnf »

What steps will reproduce the problem?
1.Connect keyboard + mouse set to PC - A4Tech 7700N (wireless mouse + keyboard)
2.run Ubuntu
3.Run GIMX
4. Only mouse is recognised by GIMX (keyboard not working). System recognises both devices and keyboard is working fine under Ubuntu but is not recognised by GIMX.

What is the expected output? What do you see instead?
I expect working Mouse + keyboard. Only mouse is working
Original DELL laptop keyboard and external USB are working fine witg GIMX but want to run my wireless keyboard + mouse set.

What version of the product are you using? On what operating system?
sixemu_0.51-1_amd64.deb Ubuntu 11.4 x64

Please provide any additional information below.

A4TECH USB Device is my set - mouse + keyboard - both devices have one USB receiver and are shown as pointer:

sephirot@SephiroT-XPS:~/GIMX$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ A4TECH USB Device id=9 [slave pointer (2)]
⎜ ↳ A4TECH USB Device id=10 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ Laptop Integrated Webcam id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
↳ Dell WMI hotkeys id=14 [slave keyboard (3)]









sephirot@SephiroT-XPS:~/GIMX$ dmesg | tail -n 10
[ 638.321221] usb 6-1.4: new low speed USB device using uhci_hcd and address 3
[ 638.520357] input: Ideazon Zboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input16
[ 638.520526] generic-usb 0003:1038:0100.0007: input,hidraw4: USB HID v1.10 Keyboard [Ideazon Zboard] on usb-0000:00:1d.1-1.4/input0
[ 638.547755] generic-usb: probe of 0003:1038:0100.0008 failed with error -22
[ 2180.533281] usb 5-1.3: USB disconnect, address 6
[ 2186.151469] usb 5-1.3: new full speed USB device using uhci_hcd and address 7
[ 2186.330363] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input17
[ 2186.330640] generic-usb 0003:09DA:054F.0009: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.3/input0
[ 2186.334880] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.1/input/input18
[ 2186.335059] generic-usb 0003:09DA:054F.000A: input,hidraw2: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.3/input1
sephirot@SephiroT-XPS:~/GIMX$







Additionally, all devices recognise set perfectly. Even PS3 - at XMB and some PS3 games with native Mouse + Keyboard support like Dust 514.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: A4TECH 7700N not partially wokring with GIMX

Post by Matlo »

Please try with GIMX 1.00. It does not use Xorg inputs anymore, so that it's possible that your keyboard will work.
GIMX creator
sephirotdnf
Posts: 69
Joined: Sat Feb 23, 2013 4:11 pm

Re: A4TECH 7700N not partially wokring with GIMX

Post by sephirotdnf »

THX,

Updating GIMX to v1.0 requires libc6 v2.15 or higher so I had to reinstall Ubuntu (as I could not update to 12.04)
I'm not sure why I didn't see that version earlier ... also v0.51 did not show an update.

Long story short - FIXED!!

Thank You!!

BTW. regards your avatar, I also love Monster Hunter and miss very much it on PS3 :D
Post Reply