Ok I'm going to try and explain myself because the issue is still present:
So this is how the macro looks like you need to pay attention on the guy to see how the problem happens and launch it sometimes each time you change the delay:
So what happens on this first code is that after shoot and throw won't connect because it's to fast for them to connect and throw won't happen so what we have to do on macro number 2 is to add more delay so that #THROW succeeds
MACRO NUMBER 1
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 400
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
MACRO NUMBER 2
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 500
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
In macro number 2 I've added the delay 500 but it seems it doesn't work when it should actually work once again pay attentio to the guy you will see that it goes real fast also I must say that I am using the notepad to change and edit the macros and save them each time so this time we are going to add more delay let's say 800
MACRO NUMBER 3
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 800
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
In macro number 3 it works but it is too slow so we have to lower the delay so that it goes faster and this is when things start going stupid I'm going to lower to 700
MACRO NUMBER 4
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 700
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
Ok here it works now comes the problem if I lower to 600
MACRO NUMBER 5
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 600
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
In here it doesn't work but you'll see how it's going to be stupid I'm putting again 700
MACRO NUMBER 6
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 700
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
And now in 700 as it was before it's not working so we are going to add more delay to 800
MACRO NUMBER 7
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 800
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
It works again let's downgrade to 700
MACRO NUMBER 8
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 700
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
It works again now instead of putting 600 I'm putting 690
MACRO NUMBER 9
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 690
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
MACRO NUMBER XX
690 delay works great I'm going to remove now 670 650 630 610 600
After all those macros I reached 600 which is working now let's go to 590
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 590
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
590 really works now let's do the same till 500
MACRO NUMBER XX
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 500
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
it worked now let's go lower
MACRO NUMBER XX
Code: Select all
MACRO DELETE
KEYDOWN u
KEYDOWN s
DELAY 10
KEYUP u
KEYUP s
DELAY 480
#SHOOT
KEYDOWN j
DELAY 10
KEYUP j
DELAY 420
#THROW
and finally I have been able to get to 480 which is the lower value I can go for but I had to do all these procedures to go into that result which takes a lot of time and struggle the only good information we can get of this is that if I start #SHOOT and want to connect with #THROW #JUMP #USE or any other command the minimum value is 480 but now I must add right away because if I change only a tiny bit 490 or 470 I have to do those procedures all over again just to make the macros working again.