Hey guys.
I was wondering if you can configure prown/lye down so that you dont have to hold the button for it to do it.
basically id like it just like the pc. 1 click and bam your on the deck.
can i configure gmix to do this? this is the only thing now i need for a full pc experience
thanks
Prown!!!!
Re: Prown!!!!
did you figure it out? you have to make a macro like
MACRO Crouch Button
KEYDOWN Crouch Button in GimX
DELAY (in ms) until prown
KEYUP Same as KEYDOWN
just that, peace
MACRO Crouch Button
KEYDOWN Crouch Button in GimX
DELAY (in ms) until prown
KEYUP Same as KEYDOWN
just that, peace
-
- Posts: 74
- Joined: Fri Apr 27, 2012 7:32 pm
Re: Prown!!!!
never realy bothered with macro's
my crouch/prown is Ctrl.. what wil i need to do to make it work fella?
my crouch/prown is Ctrl.. what wil i need to do to make it work fella?
Re: Prown!!!!
I assume your crouch is left control and you want m as your prown key, so make a file named prown.txt a put it in your macros folder
inside paste this
MACRO m
KEYDOWN LCTRL
DELAY 350
KEYUP LCTRL
this will work in MW3 and i supose BO as well, DELAY may change in other games, if you want to change the keys make sure "m" is not mapped in gimx but "LCTRL" is, hope this helps
inside paste this
MACRO m
KEYDOWN LCTRL
DELAY 350
KEYUP LCTRL
this will work in MW3 and i supose BO as well, DELAY may change in other games, if you want to change the keys make sure "m" is not mapped in gimx but "LCTRL" is, hope this helps
-
- Posts: 74
- Joined: Fri Apr 27, 2012 7:32 pm
Re: Prown!!!!
no its RCTRL for prone and crouch. i press it once for crouch and hold it for prown. basically joypad "circle" is set to "RCTRL"
also once the macro is added into the folder will it automaticaly work when in game?
thanks for your help mate.
im new to macros
also once the macro is added into the folder will it automaticaly work when in game?
thanks for your help mate.
im new to macros
Re: Prown!!!!
basically the macro what it does is precisely holding the crouch key so you can prone just by presing the key once like in the pc, and yes you just have to put the txt file in the macros folder
-
- Posts: 74
- Joined: Fri Apr 27, 2012 7:32 pm
Re: Prown!!!!
ok i added your macro but chaged LCTRL to RCTRL. nothing worked still the same.
basically i havent got M mapped to anything in GIMX and RCTRL is used for crouch/prown which is CIRCLE on the joypad.
have i missed something?
thanks in advance!
basically i havent got M mapped to anything in GIMX and RCTRL is used for crouch/prown which is CIRCLE on the joypad.
have i missed something?
thanks in advance!
Last edited by laytonanthony on Wed May 02, 2012 9:00 pm, edited 1 time in total.
-
- Posts: 74
- Joined: Fri Apr 27, 2012 7:32 pm
Re: Prown!!!!
yes got it to work now. now have done 1 i can sorta understand how they work now. thanks for your help guys.