[SOLVED] Axis Issue (Windows)

Need help? Ask here and someone will help
Post Reply
Evran
Posts: 2
Joined: Sun Apr 22, 2012 7:08 pm

[SOLVED] Axis Issue (Windows)

Post by Evran »

I've tried searching but couldn't find an answer anywhere. I'm using a wired Xbox360 controller on my PC, and have the dongle plugged into my PS3.

Now, I've attempted to set up the left stick, right stick, and triggers (which are all considered axis') and they don't work right at all. Normal buttons function perfectly.

It seems as though Gimx-serial is counting any positive axis motion as 1, and all negative axis motion as -1. I can't get any smooth motion, it is always just the two extremes.

I used the debug function in GlovePIE to double check the values, to make sure that the Xbox360 controller is in working order, and all axis' ranged correctly from -1.00 to 1.00 as you would expect.

I also tried a PPJoy Virtual Joy Stick and had the exact same issue.

Thanks for any help :).


EDIT: Terminal image to show the problem
Image
Last edited by Evran on Tue Apr 24, 2012 5:31 am, edited 1 time in total.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Axis Issue (Windows)

Post by Matlo »

Please open your config with notepad, select all, copy, and paste it in a post within a code tag.

GIMX creator
Evran
Posts: 2
Joined: Sun Apr 22, 2012 7:08 pm

Re: [SOLVED] Axis Issue (Windows)

Post by Evran »

That prompted me to check it out myself. For some reason I had mouse settings in my controller config. Removed them and it all works fine now :).
Post Reply