weird joystick values in gui
weird joystick values in gui
hi all I a am having a slight problem when mapping my joystick, all of the axis are not reading i have calibrated the stick with jstest-jtk but it still does not help
Re: weird joystick values in gui
the joystick is calibrated in ubuntu but it reads as if uncalibrated in gimx
i have purposely tried offsetting the joystick calibration but it still is receiving the same values
i have purposely tried offsetting the joystick calibration but it still is receiving the same values
Last edited by neo on Tue Jan 17, 2012 10:20 pm, edited 1 time in total.
Re: weird joystick values in gui
should i post a video of the affect
Re: weird joystick values in gui
Please don't multiple post, edit your last post instead.
Try this from a terminal:
If it works, just add "SDL_JOYSTICK_DEVICE=/dev/input/js0" with no quotes at the end of /etc/environment.
Try this from a terminal:
Code: Select all
$ SDL_JOYSTICK_DEVICE=/dev/input/js0 gimx-config
$ SDL_JOYSTICK_DEVICE=/dev/input/js0 gimx-serial
Code: Select all
$ sudo gedit /etc/environment
GIMX creator
Re: weird joystick values in gui
I ended up calibrating the stick maually by trimming the pots myself, took a couple of hours but i did sort a bit of slop out in the joints, I am having a problem when tryimg to smooth mouse outputs, any tips? Its round abot 1000 dpi, I adjust the values and save and restart the software, i have checked the config is registered in the software,just need any tips,
cheers Neo
cheers Neo
Re: weird joystick values in gui
Did you tried something like buffer size = 10 and filter = 0.5 for both x & y axes?
GIMX creator