Game Input MultipleXer

Posted: **Thu Jul 23, 2020 4:59 am**

hi,

im getting is error message:

global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyUSB1'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
auto-grab flag is set
GIMX adapter detected, controller type is: G29 PS4.
Firmware version: 8.0
Reset sent to the GIMX adapter.
Current baudrate: 500000 bps.
Trying baudrate: 2000000 bps.
Trying baudrate: 1000000 bps.
Trying baudrate: 500000 bps.
Using baudrate: 500000 bps.
found pass-through device 0x054c:0x09cc
registered joystick 0 with name "Sony Computer Entertainment Wireless Controller"
using default refresh period: 5.00ms
native mode is already enabled for HID device 01:01:01:03:00:00 (PID=c29b)
Warning: macros are not available for: joystick Sony Computer Entertainment Wireless Controller (0)
Haptic core has source haptic_source_lg for device 046d:c260
Haptic core has sink haptic_sink_lg for joystick 1 (G27 Racing Wheel)
Press the key/button assigned to PS.
Warning: skipping unsupported command DEFAULT_SPRING_ON
wheel range adjusted to 900 degrees
Warning: skipping unsupported command DEFAULT_SPRING_OFF
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)
libusb_transfer failed with status LIBUSB_TRANSFER_TIMED_OUT (endpoint=0x01)

although im able to make this work i just wondering how to fix this error message. Thanks!

Posted: **Thu Jul 23, 2020 5:11 am**

Hi

This could be due to a faulty USB UART, bad soldering, cables/hubs also there were reports of this issue occurring on the RPi and was caused by an issue in the kernel.

I noticed your adapter seems to be using a cp2102 based UART since the speed is maxed at only 500000 bps

The log file is also not showing any information on the OS version as its been cut out, please don't remove this information.

Now I need the following

1. Details on when and where you got the adapter
2. Provide the missing part of the log file
3. On what version of the RPi are you running GIMX

You can test with other cables and remove any USB hubs, also if possible test it with a windows pc

Game Input MultipleXer

Diet PI || Logitech G27 || PS4

Diet PI || Logitech G27 || PS4

Re: Diet PI || Logitech G27 || PS4